Glass Fiber High Flow

Pleat Plus GF high flow filter cartridge coreless and single open-ended(SOE) filter made with glass fiber filter media and glass fiber reinforced cage and end caps which allows for maximum working temperature up to 100℃, 6 inch (152 mm) large diameter offers high flow rate up to 110m3/h, it can greatly save water treatment plant footprint and reduce filter change-out cost. Inside-out flow design traps contaminant inside the element. The high flow glass microfiber filter is good replacement for Pall Ultipleat high flow series filter cartridges, available length are 20inch 40inch 60inch and 80inch.

Features

　　● Graded pore structure enhances dirt holding Capacity

　　● Glass fiber construction provides good resistance to both organic and inorganic solvent

　　● High contaminant removal efficiency

　　● PP core available provides excellent strength of cartridge filter

　　● High temperature tolerance

Application

　　● Pretreatment for RO in desalination industry

　　● Amine filtration in Oil&Gas/refinery industry

　　● Chemical solvents

　　● Drinking water treatment

　　● Cooling water

Specification

Materials of Construction
Filter Media	Glass Fiber
End Caps	Glass Fiber Reinforced Polypropylene
Inside Core	NA
Outside Cage	Glass Fiber Reinforced Polypropylene
O-Rings	Silicone/EPDM/NBR
Dimensions(Nominal)
Nominal Outside Diameter :	6inch/152mm
Nominal Inside Diameter	3inch/76mm
Length	20 / 40 / 60 / 80 inches
Micron Ratings	1μm,3μm,5μm,10μm,20μm, 30μm,50μm,75μm,100μm

Operating Condition
Maximum Temperature:	180℉ (82 ℃)
Maximum Pressure:	58psi (4bar) @ 68 ℉ (20 ℃)
Recommended change-out pressure:	35psi (2.4bar) @ 68 ℉ (20 ℃)

Order Information

For Example: DFHFP 5 - 40 GS C

DFHF

Series

Rating

Length

Material

O-Ring

Cage

Delta Filtration High Flow

P=Pleat Plus P

1=1μm
3=3μm
5=5μm
10=10μm
20=20μm
30=30μm
50=50μm
75=75μm
100=100μm

20=20inch
40=40inch
60=60inch
80=80inch

G=Glass Fiber

S=Silicone
E=EPDM
N=NBR
V=Viton

C=Cage
B=Belt

Send Inquiry

Contact

Category:

High Flow Filter

Keywords:

Roll Membrane | High Flow Filter | PP Pleated Filter

Tel: +86-513-89157856
Email: sales@delta-filtration.com

Product Description

Features

　　● Graded pore structure enhances dirt holding Capacity

　　● Glass fiber construction provides good resistance to both organic and inorganic solvent

　　● High contaminant removal efficiency

　　● PP core available provides excellent strength of cartridge filter

　　● High temperature tolerance

Application

　　● Pretreatment for RO in desalination industry

　　● Amine filtration in Oil&Gas/refinery industry

　　● Chemical solvents

　　● Drinking water treatment

　　● Cooling water

Specification

Materials of Construction
Filter Media	Glass Fiber
End Caps	Glass Fiber Reinforced Polypropylene
Inside Core	NA
Outside Cage	Glass Fiber Reinforced Polypropylene
O-Rings	Silicone/EPDM/NBR
Dimensions(Nominal)
Nominal Outside Diameter :	6inch/152mm
Nominal Inside Diameter	3inch/76mm
Length	20 / 40 / 60 / 80 inches
Micron Ratings	1μm,3μm,5μm,10μm,20μm, 30μm,50μm,75μm,100μm

Operating Condition
Maximum Temperature:	180℉ (82 ℃)
Maximum Pressure:	58psi (4bar) @ 68 ℉ (20 ℃)
Recommended change-out pressure:	35psi (2.4bar) @ 68 ℉ (20 ℃)

Order Information

For Example: DFHFP 5 - 40 GS C

DFHF

Series

Rating

Length

Material

O-Ring

Cage

Delta Filtration High Flow

P=Pleat Plus P

1=1μm
3=3μm
5=5μm
10=10μm
20=20μm
30=30μm
50=50μm
75=75μm
100=100μm

20=20inch
40=40inch
60=60inch
80=80inch

G=Glass Fiber

S=Silicone
E=EPDM
N=NBR
V=Viton

C=Cage
B=Belt

Related Products

AQUAFLEX HP PVC 0.8mm

8" AQUAFLEX HP PVC 0.8mm UFCLE Ultrafiltration module is used for production of process and potable water as well as WWTP effluent, Delta Filtration DFPES9055 model can be used to replace Pentair AQUAFLEX HP PVC 0.8mm membrane with compatible dimensions which means no piping modification is required.

Hyflux Kristal K600B Retrofit

Fluoro-Pure D600ER Series UF filter is developed to replace Hyflux UF Membrane Kristal K600ER model, providing a more economical replacement solution and making sure retrofit module is 100% compatible with existing UF system.

IP-51XP IP-77XP Alternative

Fluoro-Pure DelPac Series Ultrafiltration module can be used as replacement for Dow IntegraPac membrane IP-51XP, IPD-51XP, IP-77XP and IPD-77XP series with compatible dimensions, PVDF hollow fiber UF membrane applies outside-in flow mode, it allows for wide range of feed water, making it a robust UF module.

IP-51 IP-77 Alternative

Fluoro-Pure DelPac Series Ultrafiltration module is developed to replace Dow IntegraPac membrane IP-51 and IP-77 cross flow ultrafiltration filter with compatible dimensions at much more economical price, compared with PES, PVC and PAN materials, PVDF has better tensile strength and much better resistance to chemicals especially sodium hypochlorite-which is main chemical used for membrane cleaning.

Ultrafiltration DFPVDFMAX60

Delta Filtration Ultrafiltration module DFPVDFMAX60 is equivalent to Hydranautics HYDRAcap MAX 60 UF membrane, with PVDF membrane of pore size 0.03μm, DFPVDFMAX60 can provide superior retention performance and offer log 4 rejection of Giardia cysts and Cryptosporidium oocysts.

Retrofit For 3M Liqui-Flux

Fluoro-Pure DFPESW10-75 Ultrafiltration module is made with hollow fiber Polyethersulfone(PES) membrane which is naturally hydrophilic and suitable for liquid filtration, it can be used to replace 3M MEMBRANA Liqui-Flux W10 Series UF membrane modules with better cost effectiveness.

Retrofit For XIGA XF40

DelGuard Series Ultrafiltration module is made with hollow fiber 100% Polyethersulfone(PES) membrane which is naturally hydrophilic and suitable for liquid filtration, it can be used to replace Pentair NORIT X-FLOW XIGA / SEAGUARD Series UF membrane modules in diverse applications including pretreatment for seawater SWRO desalination, drinking water treatment, injection water production, boiler feed water production etc.

DELWED 500D MBR Module

Fluoro-Klean DELWED MBR membranes are direct replacement for 500D 340, 500D 370 and 500D 440 membrane modules, with large filtration area and flow capacity, it can be used for large project to save footprint significantly, MBR cassette is also available upon customized design requirement, high cost effectiveness makes DELWED series a good option for new and replacement projects.

Retrofit VK-0094 Dizzer 5000plus

Fluoro-Pure DFPES700B-50 Ultrafiltration module is an economical replacement for Inge dizzer XL 5000plus(p/n: VK-0094), as an integrated membrane technology provider, we have strict quality control procedure and internal test to make sure Delta module provides equivalent performance to Inge brand.

Retrofit For DuPont IntegraTec XP 51

Fluoro-Pure DFP Series DFUFPVDF9051 is economical replacement for DuPont IntegraTec XP 51(previous Dow SFP-2860) with same dimensions, hydrophilic PVDF membrane can provide stable permeate flow, outside-in flow mode has high tolerance for feed water quality. Ultrafiltration membrane 0.03μm pore size can effectively remove suspended solids and bacteria, thus producing high quality permeate with low SDI and turbidity.

DFPES10K9060-Pentair HFS 60 Retrofit

Fluoro-Pure DELFLEX Series DFPES10K9060 Ultrafiltration module is made with hollow fiber Polyethersulfone(PES) membrane with small pore size of 10,000 Dalton Mollecular Weight Cut-Off which can remove colloidal silica from surface water, it can be used to replace Pentair X-Flow HFS 60 tight ultrafiltration membrane with better cost effectiveness.

Retrofit For Dow Filmtec ECO PRO-440

Delta Filtration RO membrane DFBW8040-41i can work as direct replacement for Dow Filmtec Eco Pro-440 element for brackish water treatment process with TDS range 1,000~10,000 mg/L, available filtration areas are 37㎡, 39㎡ and 41㎡ for DFBW8040 model, it provides high salt-rejection rate with low operation pressure. DFBW8040-41i BWRO membrane can be used in wide range of treatment process including sea water desalination(second pass RO), drinking water filtration, wastewater recycling and grey water reuse etc.