Membrane Degasifier 8x20
Delta Filtration degassing membrane contactors (membrane degasifier) DFMC8x20 model has 52㎡ filtration area which produces flow rate range 1~11m³/hr. Microporous hollow fiber with naturally hydrophobic feature can effectively retain oxygen(O2) and carbon dioxide(CO2), the modules can be installed either by parallel or series according to project requirement.
Membrane contactor is advanced technology to separate gas-fluid based on the use of a porous membrane, the membrane acts as a mere barrier between the two fluids, without giving any selectivity to the separation. Compared with conventional degassing technology, membrane contactor has advantages of low energy consumption, modular scale-up, easy operation, and so on.
Typical features:
● Polypropylene membrane with high hydrophobicity
● Plug and play installation
● PVC or SS 316 housing optional
● Excellent tempeature resistance
Specification
| Model | DFMC8x20 |
| Dimensions(mm) | φ225x847mm |
| Flow range | 1 - 11m³/hr |
| Membrane material | Polypropylene(PP) |
| Membrane housing | PVC / Stainless steel |
| Potting material | Epoxy resin |
| Membrane area | 52㎡ |
| Seal material | EPDM / Viton |
| Connection(liquid) | 2 inch Flange |
| Connection(vacuum) | 1 inch Flange |
| Working pressure(Shellside) | 5-35℃@0.6MPa 50℃@0.2MPa |
| Working pressure(Lumenside) | 25℃@0.4MPa |
Category:
Degassing Membrane Contactor
Keywords:
Roll Membrane | High Flow Filter | PP Pleated Filter
Contact Us
Tel: +86-513-89157856
Email: sales@delta-filtration.com
Product Description
Delta Filtration degassing membrane contactors (membrane degasifier) DFMC8x20 model has 52㎡ filtration area which produces flow rate range 1~11m³/hr. Microporous hollow fiber with naturally hydrophobic feature can effectively retain oxygen(O2) and carbon dioxide(CO2), the modules can be installed either by parallel or series according to project requirement.
Membrane contactor is advanced technology to separate gas-fluid based on the use of a porous membrane, the membrane acts as a mere barrier between the two fluids, without giving any selectivity to the separation. Compared with conventional degassing technology, membrane contactor has advantages of low energy consumption, modular scale-up, easy operation, and so on.
Typical features:
● Polypropylene membrane with high hydrophobicity
● Plug and play installation
● PVC or SS 316 housing optional
● Excellent tempeature resistance
Specification
| Model | DFMC8x20 |
| Dimensions(mm) | φ225x847mm |
| Flow range | 1 - 11m³/hr |
| Membrane material | Polypropylene(PP) |
| Membrane housing | PVC / Stainless steel |
| Potting material | Epoxy resin |
| Membrane area | 52㎡ |
| Seal material | EPDM / Viton |
| Connection(liquid) | 2 inch Flange |
| Connection(vacuum) | 1 inch Flange |
| Working pressure(Shellside) | 5-35℃@0.6MPa 50℃@0.2MPa |
| Working pressure(Lumenside) | 25℃@0.4MPa |
Related Products
Dow SFP-2880 2880XP Alternative
Fluoro-Pure DFP Series Ultrafiltration module is developed to replace Dow Ultrafiltration Membrane SFP 2880 with same dimensions and operation principle, compared with PES, PVC and PAN materials, PVDF has much better resistance to chemicals especially sodium hypochlorite-which is main chemical used for membrane cleaning.
Pentair X-Flow Aquaflex HP 55 Retrofit
Fluoro-Free DELFLEX Series Ultrafiltration module DFPES9055 model can work as economical replacement for Pentair Norit Aquaflex HP 55 with better cost effectiveness, no modification is required because of its compatible dimensions, DFPES9055 can well fit into original membrane systems.
Hollow fiber UF module allows for larger loading capacity with same space, 0.02μm pore size contributes to good rejection to bacteria and virus, PES material has very good hydrophilic feature and less membrane fouling.
Fluoro-Pure D600ER Series UF filter is developed to replace Hyflux UF Membrane Kristal K600ER model, providing a more economical replacement solution and making sure retrofit module is 100% compatible with existing UF system.
Fluoro-Pure DelPac Series Ultrafiltration module can be used as replacement for Dow IntegraPac membrane IP-51XP, IPD-51XP, IP-77XP and IPD-77XP series with compatible dimensions, PVDF hollow fiber UF membrane applies outside-in flow mode, it allows for wide range of feed water, making it a robust UF module.
Retrofit For Veolia ZW500D 600N Strength
Fluoro-Klean DELWED MBR membranes are direct replacement for Veolia ZW500D 340, ZW500D 370 and ZW500D 440 membrane modules with excellent 600N tensile strength, which is same as original membrane modules and there is no fiber breakage issue, 48M 52M MBR cassette is also available with stainless steel 316 material, each cassette can be equipped with 48, 50 and 52 modules, pulsed aeration technology contributes to less energy consumption and plant cost.
Delta Filtration Ultrafiltration module DFPVDFMAX60 is equivalent to Hydranautics HYDRAcap MAX 60 UF membrane, with PVDF membrane of pore size 0.03μm, DFPVDFMAX60 can provide superior retention performance and offer log 4 rejection of Giardia cysts and Cryptosporidium oocysts.
Fluoro-Pure DFPESW10-75 Ultrafiltration module is made with hollow fiber Polyethersulfone(PES) membrane which is naturally hydrophilic and suitable for liquid filtration, it can be used to replace 3M MEMBRANA Liqui-Flux W10 Series UF membrane modules with better cost effectiveness.
DelGuard Series Ultrafiltration module is made with hollow fiber 100% Polyethersulfone(PES) membrane which is naturally hydrophilic and suitable for liquid filtration, it can be used to replace Pentair NORIT X-FLOW XIGA / SEAGUARD Series UF membrane modules in diverse applications including pretreatment for seawater SWRO desalination, drinking water treatment, injection water production, boiler feed water production etc.
Retrofit For Koch Targa II 10072-35
Delta Filtration PES Ultrafiltration module DFTGAPES10072 is equivalent to Koch Targa II 10072-35 ultrafiltration cartridge with same dimensions and equivalent performance, with 81㎡ large filtration area, it can be used in large water treatment plants with limited footprint, including mining industry, oil&gas, power plants etc.
Toray HFU-1020AN Membrane Equivalent
Fluoro-Pure DELFIL Ultrafiltration is developed to replace TORAY UF Membrane TORAYFIL series as a more economical replacement solution, 100% compatible with existing UF system, PVDF membrane and PVC housing structure provides good resistance to chlorine and strong acids, which allows for better chemical cleaning to recover membrane flux.
Retrofit For Litree Gemini-U MBR Module
Fluoro-Klean DFHFMBR-GMNU MBR membranes are alternative modules to Litree Gemini-U MBR membrane module with 31㎡ filtration area, this submerged membrane module is specially for sewage treatment process.
Send Inquiry
Delta Filtration Material Co.Ltd.
Sales office: 2811, Block B, Zhongnan CBD, Nantong, Jiangsu, China
Tel: 86-(0)51389157856
WhatsApp: +86-13477006021
Email: sales@delta-filtration.com
www.dt-filtri.com
www.delta-filtration.com
Customer message