+
  • 1(18).jpg
  • 2(19).jpg
  • 3(15).jpg

Pleat Plus N High Flow Cartridge Filter

Pleat Plus N high flow cartridge filter is designed to replace 3M high flow filter and fits well in 3M existing filter housing, 6.5 inch (165 mm) outer diameter offers high flow rate thus fewer filters are needed. Polypropylene and glass fiber pleated media are available, it provides stable and consistent particle removal performance which ensures downstream filtration system under good protection. Compared with 2.5 inch conventional filters, it offers lower pressure drop, easy change-out feature makes it suitable for high flow filtration needs with limited space.

Features

  ● Outside to inside structure enhances the flow rate

  ● Widely excellent chemical compatibility

  ● Multi membrane layer enhances the dirt holding capacity

  ● Excellent handle design improve the replacement convenience

  ● 100% thermally welded reduces the leakage risk

  ● Long service life

Application

  ● Pre-RO

  ● Industrial condensate water

  ● Microeletronics process water

  ● Chemical solvents

  ● Drinking water treatment

  ● Cooling water

  ● Food & Beverage

Specification

Materials of Construction

Filter Media

Polypropylene/Glass Fiber

End Caps

Polypropylene

Inside Core

Polypropylene

Outside Core

Polypropylene

O-Rings

Silicone/EPDM/NBR

Dimensions(Nominal)

Nominal Outside Diameter :

6.5inch/165mm

Nominal Inside Diameter 

1.57inch/40mm
3.15inch/80mm

Length

40inch(1016mm)/60inch(1525mm)

Micron Ratings

1μm,3μm,5μm,10μm,20μm,
30μm,50μm,75μm,100μm

Operating Condition

Maximum Temperature:

Polypropylene 180℉ (82 ℃)
Glass Fiber 248℉ (121 ℃)

Maximum Pressure:

49psi (3.4bar) @ 68 ℉ (20 ℃)

Recommended change-out pressure:

35psi (2.4bar) @ 68 ℉ (20 ℃)

Order Information

Pleat Plus N High Flow Cartridge Filter

Category:

High Flow Filter

Keywords:

Roll Membrane | High Flow Filter | PP Pleated Filter

Contact Us

Pleat Plus N high flow cartridge filter is designed to replace 3M high flow filter and fits well in 3M existing filter housing, 6.5 inch (165 mm) outer diameter offers high flow rate thus fewer filters are needed. Polypropylene and glass fiber pleated media are available, it provides stable and consistent particle removal performance which ensures downstream filtration system under good protection. Compared with 2.5 inch conventional filters, it offers lower pressure drop, easy change-out feature makes it suitable for high flow filtration needs with limited space.

Product Description


Pleat Plus N high flow cartridge filter is designed to replace 3M high flow filter and fits well in 3M existing filter housing, 6.5 inch (165 mm) outer diameter offers high flow rate thus fewer filters are needed. Polypropylene and glass fiber pleated media are available, it provides stable and consistent particle removal performance which ensures downstream filtration system under good protection. Compared with 2.5 inch conventional filters, it offers lower pressure drop, easy change-out feature makes it suitable for high flow filtration needs with limited space.

Features

  ● Outside to inside structure enhances the flow rate

  ● Widely excellent chemical compatibility

  ● Multi membrane layer enhances the dirt holding capacity

  ● Excellent handle design improve the replacement convenience

  ● 100% thermally welded reduces the leakage risk

  ● Long service life

Application

  ● Pre-RO

  ● Industrial condensate water

  ● Microeletronics process water

  ● Chemical solvents

  ● Drinking water treatment

  ● Cooling water

  ● Food & Beverage

Specification

Materials of Construction

Filter Media

Polypropylene/Glass Fiber

End Caps

Polypropylene

Inside Core

Polypropylene

Outside Core

Polypropylene

O-Rings

Silicone/EPDM/NBR

Dimensions(Nominal)

Nominal Outside Diameter :

6.5inch/165mm

Nominal Inside Diameter 

1.57inch/40mm
3.15inch/80mm

Length

40inch(1016mm)/60inch(1525mm)

Micron Ratings

1μm,3μm,5μm,10μm,20μm,
30μm,50μm,75μm,100μm

Operating Condition

Maximum Temperature:

Polypropylene 180℉ (82 ℃)
Glass Fiber 248℉ (121 ℃)

Maximum Pressure:

49psi (3.4bar) @ 68 ℉ (20 ℃)

Recommended change-out pressure:

35psi (2.4bar) @ 68 ℉ (20 ℃)

Order Information

Pleat Plus N High Flow Cartridge Filter

Related Products


AQUAFLEX HP PVC 0.8mm


8" AQUAFLEX HP PVC 0.8mm UFCLE Ultrafiltration module is used for production of process and potable water as well as WWTP effluent, Delta Filtration DFPES9055 model can be used to replace Pentair AQUAFLEX HP PVC 0.8mm membrane with compatible dimensions which means no piping modification is required.

Hyflux Kristal K600B Retrofit


Fluoro-Pure D600ER Series UF filter is developed to replace Hyflux UF Membrane Kristal K600ER model, providing a more economical replacement solution and making sure retrofit module is 100% compatible with existing UF system.

IP-51XP IP-77XP Alternative


Fluoro-Pure DelPac Series Ultrafiltration module can be used as replacement for Dow IntegraPac membrane IP-51XP, IPD-51XP, IP-77XP and IPD-77XP series with compatible dimensions, PVDF hollow fiber UF membrane applies outside-in flow mode, it allows for wide range of feed water, making it a robust UF module.

IP-51 IP-77 Alternative


Fluoro-Pure DelPac Series Ultrafiltration module is developed to replace Dow IntegraPac membrane IP-51 and IP-77 cross flow ultrafiltration filter with compatible dimensions at much more economical price, compared with PES, PVC and PAN materials, PVDF has better tensile strength and much better resistance to chemicals especially sodium hypochlorite-which is main chemical used for membrane cleaning.

Ultrafiltration DFPVDFMAX60


Delta Filtration Ultrafiltration module DFPVDFMAX60 is equivalent to Hydranautics HYDRAcap MAX 60 UF membrane, with PVDF membrane of pore size 0.03μm, DFPVDFMAX60 can provide superior retention performance and offer log 4 rejection of Giardia cysts and Cryptosporidium oocysts.

Retrofit For 3M Liqui-Flux


Fluoro-Pure DFPESW10-75 Ultrafiltration module is made with hollow fiber Polyethersulfone(PES) membrane which is naturally hydrophilic and suitable for liquid filtration, it can be used to replace 3M MEMBRANA Liqui-Flux W10 Series UF membrane modules with better cost effectiveness.

Retrofit For XIGA XF40


DelGuard Series Ultrafiltration module is made with hollow fiber 100% Polyethersulfone(PES) membrane which is naturally hydrophilic and suitable for liquid filtration, it can be used to replace Pentair NORIT X-FLOW XIGA / SEAGUARD Series UF membrane modules in diverse applications including pretreatment for seawater SWRO desalination, drinking water treatment, injection water production, boiler feed water production etc.

DELWED 500D MBR Module


Fluoro-Klean DELWED MBR membranes are direct replacement for 500D 340, 500D 370 and 500D 440 membrane modules, with large filtration area and flow capacity, it can be used for large project to save footprint significantly, MBR cassette is also available upon customized design requirement, high cost effectiveness makes DELWED series a good option for new and replacement projects.

Retrofit VK-0094 Dizzer 5000plus


Fluoro-Pure DFPES700B-50 Ultrafiltration module is an economical replacement for Inge dizzer XL 5000plus(p/n: VK-0094), as an integrated membrane technology provider, we have strict quality control procedure and internal test to make sure Delta module provides equivalent performance to Inge brand.

Retrofit For DuPont IntegraTec XP 51


Fluoro-Pure DFP Series DFUFPVDF9051 is economical replacement for DuPont IntegraTec XP 51(previous Dow SFP-2860) with same dimensions, hydrophilic PVDF membrane can provide stable permeate flow, outside-in flow mode has high tolerance for feed water quality. Ultrafiltration membrane 0.03μm pore size can effectively remove suspended solids and bacteria, thus producing high quality permeate with low SDI and turbidity.

DFPES10K9060-Pentair HFS 60 Retrofit


Fluoro-Pure DELFLEX Series DFPES10K9060 Ultrafiltration module is made with hollow fiber Polyethersulfone(PES) membrane with small pore size of 10,000 Dalton Mollecular Weight Cut-Off which can remove colloidal silica from surface water, it can be used to replace Pentair X-Flow HFS 60 tight ultrafiltration membrane with better cost effectiveness.

Retrofit For Dow Filmtec ECO PRO-440


Delta Filtration RO membrane DFBW8040-41i can work as direct replacement for Dow Filmtec Eco Pro-440 element for brackish water treatment process with TDS range 1,000~10,000 mg/L, available filtration areas are 37㎡, 39㎡ and 41㎡ for DFBW8040 model, it provides high salt-rejection rate with low operation pressure. DFBW8040-41i BWRO membrane can be used in wide range of treatment process including sea water desalination(second pass RO), drinking water filtration, wastewater recycling and grey water reuse etc.

Send Inquiry