Pleat Plus Q High Flow Cartridge Filter
Pleat Plus Q high flow filter has 6 inch (152 mm) outer diameter providing large surface filtration area, one 40inch filter element can produce max 80 m3 /h, which is optimized for high flow application such as reverse osmosis pre-filtration. Compared with 2.5 inch diameter filter, it can greatly reduce filter use and footprint. Multi-layer construction makes it have high dirt holding capacity and long service life. Available filter media is polypropylene and glass fiber with pore size from 1μm to 100μm. It is equivalent to Parker MegaFlow filters but provides a more cost effective filtration solution.
Features
● Outside to inside structure enhances the flow rate
● Inner O-Ring design add the removal efficiency
● Multi membrane layer enhances the dirt holding capacity
● 100% thermally welded reduces the leakage risk
● Long service life
Application
● Pre-RO
● Industrial condensate water
● Microeletronics process water
● Chemical solvents
● Drinking water treatment
● Cooling water
● Food & Beverage
Specification
Materials of Construction |
|
Filter Media |
Polypropylene/Glass Fiber |
End Caps |
Polypropylene |
Inside Core |
Polypropylene |
Outside Core |
Netting |
O-Rings |
Silicone/EPDM/NBR |
Dimensions(Nominal) |
|
Nominal Outside Diameter : |
6inch/152mm |
Nominal Inside Diameter |
3.78inch/96mm |
Length |
40inch(1016mm)/60inch(1525mm) |
Micron Ratings |
1μm,3μm,5μm,10μm,20μm, |
Operating Condition |
|
Maximum Temperature: |
Polypropylene 180℉ (82 ℃) |
Maximum Pressure: |
49psi (3.4bar) @ 68 ℉ (20 ℃) |
Recommended change-out pressure: |
35psi (2.4bar) @ 68 ℉ (20 ℃) |
Order Information
Category:
High Flow Filter
Keywords:
Roll Membrane | High Flow Filter | PP Pleated Filter
Contact Us
Tel: +86-513-89157856
Email: sales@delta-filtration.com
Product Description
Pleat Plus Q high flow filter has 6 inch (152 mm) outer diameter providing large surface filtration area, one 40inch filter element can produce max 80 m3 /h, which is optimized for high flow application such as reverse osmosis pre-filtration. Compared with 2.5 inch diameter filter, it can greatly reduce filter use and footprint. Multi-layer construction makes it have high dirt holding capacity and long service life. Available filter media is polypropylene and glass fiber with pore size from 1μm to 100μm. It is equivalent to Parker MegaFlow filters but provides a more cost effective filtration solution.
Features
● Outside to inside structure enhances the flow rate
● Inner O-Ring design add the removal efficiency
● Multi membrane layer enhances the dirt holding capacity
● 100% thermally welded reduces the leakage risk
● Long service life
Application
● Pre-RO
● Industrial condensate water
● Microeletronics process water
● Chemical solvents
● Drinking water treatment
● Cooling water
● Food & Beverage
Specification
Materials of Construction |
|
Filter Media |
Polypropylene/Glass Fiber |
End Caps |
Polypropylene |
Inside Core |
Polypropylene |
Outside Core |
Netting |
O-Rings |
Silicone/EPDM/NBR |
Dimensions(Nominal) |
|
Nominal Outside Diameter : |
6inch/152mm |
Nominal Inside Diameter |
3.78inch/96mm |
Length |
40inch(1016mm)/60inch(1525mm) |
Micron Ratings |
1μm,3μm,5μm,10μm,20μm, |
Operating Condition |
|
Maximum Temperature: |
Polypropylene 180℉ (82 ℃) |
Maximum Pressure: |
49psi (3.4bar) @ 68 ℉ (20 ℃) |
Recommended change-out pressure: |
35psi (2.4bar) @ 68 ℉ (20 ℃) |
Order Information
Related Products
Send Inquiry