Pleat Plus M High Flow Cartridge Filter
Pleat Plus M high flow filter is retrofit for 3M Cuno 740B filter cartridge, the depth filter is manufactured in radial pleating technology which can maximize its surface filtration area, 6.5 inch (165 mm) outer diameter provides much higher flow rate and dirt holding capacity than those conventional pleating filters. By using FDA compliant filter media, Pleat Plus M filter offers high contaminants removal efficiency and broad chemical compatibility, making it suitable for a variety of filtration process. With “twist-to-lock” design, the filter can be installed and changed easily. It can replace 3M high flow filter cartridge 100% while providing a much more economical filtration solution.
As a professional high flow filter cartridge manufacturer, Delta Filtration implements strict quality control process which guarantees every filter shipped out is qualified and efficient.
Features |
Benefits |
Advantages |
Radial pleating technology |
Up to 70% increase in surface area |
Higher processing capability with greater flow |
Increased surface area of cartridge |
Lower pressure drop |
Fewer change-out, less maintenance costs |
Single/Double O-rings Seal |
Positive seal with no bypass |
High product quality |
6.5inch large diameter |
Fewer filter usage |
Less footprint |
Industries and Applications
Food&Beverage:Bottled water, Beers, Wines, Soft drinks
Fine chemicals:Polymers, Acids, Bases, Solvents
Water Treatment: Pre reverse osmosis, Resin trap
Oil & Gas: Water injection, Amine filtration, Glycols
Power Generation: boiler feed water, return condensate water
Materials of Construction |
|
Filter Media |
Polypropylene/Glass Fiber |
End Caps |
Polypropylene |
Inside Core |
Polypropylene |
Outside Core |
Netting |
O-Rings |
Silicone/EPDM/NBR |
Dimensions(Nominal) |
|
Nominal Outside Diameter : |
6.5inch/165mm |
Nominal Inside Diameter |
3.15inch/80mm 1.57inch/40mm |
Length |
40inch(1016mm)/60inch(1525mm) |
Micron Ratings |
1μm,3μm,5μm,10μm,20μm, 30μm,50μm,75μm,100μm |
Operating Condition |
|
Maximum Temperature: |
Polypropylene 180℉ (82 ℃) Glass Fiber 248℉ (121 ℃) |
Maximum Pressure: |
49psi (3.4bar) @ 68 ℉ (20 ℃) |
Recommended change-out pressure: |
35psi (2.4bar) @ 68 ℉ (20 ℃) |
Order Information
For Example: DFHFM 5 - 40 E H |
|||||||
DFHF |
Series |
Rating |
- |
Length |
Material |
O-Ring |
Connect type |
Delta Filtration High Flow |
M=Pleat Plus M |
1=1μm 3=3μm 5=5μm 10=10μm 20=20μm 30=30μm 50=50μm 75=75μm 100=100μm |
NA |
20=20inch 40=40inch 60=60inch
|
Blank=Polypropylene G=Glass Fiber
|
S=Silicone E=EPDM N=NBR |
H=Handle C=Cross Small Connector
|
Category:
High Flow Filter
Keywords:
Roll Membrane | High Flow Filter | PP Pleated Filter
Contact Us
Tel: +86-513-89157856
Email: sales@delta-filtration.com
Product Description
Pleat Plus M high flow filter is retrofit for 3M Cuno 740B filter cartridge, the depth filter is manufactured in radial pleating technology which can maximize its surface filtration area, 6.5 inch (165 mm) outer diameter provides much higher flow rate and dirt holding capacity than those conventional pleating filters. By using FDA compliant filter media, Pleat Plus M filter offers high contaminants removal efficiency and broad chemical compatibility, making it suitable for a variety of filtration process. With “twist-to-lock” design, the filter can be installed and changed easily. It can replace 3M high flow filter cartridge 100% while providing a much more economical filtration solution.
As a professional high flow filter cartridge manufacturer, Delta Filtration implements strict quality control process which guarantees every filter shipped out is qualified and efficient.
Features |
Benefits |
Advantages |
Radial pleating technology |
Up to 70% increase in surface area |
Higher processing capability with greater flow |
Increased surface area of cartridge |
Lower pressure drop |
Fewer change-out, less maintenance costs |
Single/Double O-rings Seal |
Positive seal with no bypass |
High product quality |
6.5inch large diameter |
Fewer filter usage |
Less footprint |
Industries and Applications
Food&Beverage:Bottled water, Beers, Wines, Soft drinks
Fine chemicals:Polymers, Acids, Bases, Solvents
Water Treatment: Pre reverse osmosis, Resin trap
Oil & Gas: Water injection, Amine filtration, Glycols
Power Generation: boiler feed water, return condensate water
Materials of Construction |
|
Filter Media |
Polypropylene/Glass Fiber |
End Caps |
Polypropylene |
Inside Core |
Polypropylene |
Outside Core |
Netting |
O-Rings |
Silicone/EPDM/NBR |
Dimensions(Nominal) |
|
Nominal Outside Diameter : |
6.5inch/165mm |
Nominal Inside Diameter |
3.15inch/80mm 1.57inch/40mm |
Length |
40inch(1016mm)/60inch(1525mm) |
Micron Ratings |
1μm,3μm,5μm,10μm,20μm, 30μm,50μm,75μm,100μm |
Operating Condition |
|
Maximum Temperature: |
Polypropylene 180℉ (82 ℃) Glass Fiber 248℉ (121 ℃) |
Maximum Pressure: |
49psi (3.4bar) @ 68 ℉ (20 ℃) |
Recommended change-out pressure: |
35psi (2.4bar) @ 68 ℉ (20 ℃) |
Order Information
For Example: DFHFM 5 - 40 E H |
|||||||
DFHF |
Series |
Rating |
- |
Length |
Material |
O-Ring |
Connect type |
Delta Filtration High Flow |
M=Pleat Plus M |
1=1μm 3=3μm 5=5μm 10=10μm 20=20μm 30=30μm 50=50μm 75=75μm 100=100μm |
NA |
20=20inch 40=40inch 60=60inch
|
Blank=Polypropylene G=Glass Fiber
|
S=Silicone E=EPDM N=NBR |
H=Handle C=Cross Small Connector
|
Related Products
Send Inquiry