Degassing Membrane 10x28
Delta Filtration degassing membrane contactor DFMC10x28 model has 128㎡ large filtration area which produces flow rate range 10~57m³/hr, with both stainless steel 316 and FRP housing available, it is alternative for 3M membrane contactor Liqui-Cel EXF-10x28. Microporous hollow fiber with naturally hydrophobic feature can effectively retain oxygen(O2) and carbon dioxide(CO2), thus producing high quality feed water for EDI units.
Typical features:
● PP membrane with super hydrophobic nature
● Compact design with easy installation
● High working pressure and temperature
● Direct replacement for 3M Liqui-Cel
Specification
| Model | DFMC10x28 |
| Dimensions(mm) | 285x1187 |
| Flow range | 10 - 57m³/hr |
| Membrane material | Polypropylene(PP) |
| Membrane housing | FRP+PP / Stainless steel |
| Potting material | Epoxy resin |
| Membrane area | 128 ㎡ |
| Seal material | EPDM / Viton |
| Connection(liquid) | 3 inch Flange |
| Connection(vacuum) | 1 inch Flange |
| Working pressure(Shellside) | 5-50℃@0.72MPa 70℃@0.21MPa |
| Working pressure(Lumenside) | 25℃@0.62MPa |
Feed Water Quality Recommendation
| Indicator | Suggested value |
| Colloids(SDI) | <3 |
| Turbidity | <0.5NTU |
| Total Suspended Solids | <5mg/L |
| Particulates | 5μm |
| Total hardness | <10 mg/L |
| Dissolved Organics | <1mg/L |
| Suspended oil | <5mg/L |
| Free chlorine | Continuous: 0.5ppm |
| Cumulative: 24000ppm-hrs | |
| pH | 0.5-14 |
| Silica colloidal | <5mg/L |
| Surfactants | 0 mg/L |
| Ozone | 0 mg/L |
| Chlorine dioxide | 0 mg/L |
Category:
Degassing Membrane Contactor
Keywords:
Roll Membrane | High Flow Filter | PP Pleated Filter
Contact Us
Tel: +86-513-89157856
Email: sales@delta-filtration.com
Product Description
Delta Filtration degassing membrane contactor DFMC10x28 model has 128㎡ large filtration area which produces flow rate range 10~57m³/hr, with both stainless steel 316 and FRP housing available, it is alternative for 3M membrane contactor Liqui-Cel EXF-10x28. Microporous hollow fiber with naturally hydrophobic feature can effectively retain oxygen(O2) and carbon dioxide(CO2), thus producing high quality feed water for EDI units.
Typical features:
● PP membrane with super hydrophobic nature
● Compact design with easy installation
● High working pressure and temperature
● Direct replacement for 3M Liqui-Cel
Specification
| Model | DFMC10x28 |
| Dimensions(mm) | 285x1187 |
| Flow range | 10 - 57m³/hr |
| Membrane material | Polypropylene(PP) |
| Membrane housing | FRP+PP / Stainless steel |
| Potting material | Epoxy resin |
| Membrane area | 128 ㎡ |
| Seal material | EPDM / Viton |
| Connection(liquid) | 3 inch Flange |
| Connection(vacuum) | 1 inch Flange |
| Working pressure(Shellside) | 5-50℃@0.72MPa 70℃@0.21MPa |
| Working pressure(Lumenside) | 25℃@0.62MPa |
Feed Water Quality Recommendation
| Indicator | Suggested value |
| Colloids(SDI) | <3 |
| Turbidity | <0.5NTU |
| Total Suspended Solids | <5mg/L |
| Particulates | 5μm |
| Total hardness | <10 mg/L |
| Dissolved Organics | <1mg/L |
| Suspended oil | <5mg/L |
| Free chlorine | Continuous: 0.5ppm |
| Cumulative: 24000ppm-hrs | |
| pH | 0.5-14 |
| Silica colloidal | <5mg/L |
| Surfactants | 0 mg/L |
| Ozone | 0 mg/L |
| Chlorine dioxide | 0 mg/L |
Related Products
Pentair X-Flow Aquaflex HP 55 Retrofit
Fluoro-Free DELFLEX Series Ultrafiltration module DFPES9055 model can work as economical replacement for Pentair Norit Aquaflex HP 55 with better cost effectiveness, no modification is required because of its compatible dimensions, DFPES9055 can well fit into original membrane systems.
Hollow fiber UF module allows for larger loading capacity with same space, 0.02μm pore size contributes to good rejection to bacteria and virus, PES material has very good hydrophilic feature and less membrane fouling.
Fluoro-Pure D600ER Series UF filter is developed to replace Hyflux UF Membrane Kristal K600ER model, providing a more economical replacement solution and making sure retrofit module is 100% compatible with existing UF system.
Fluoro-Pure DelPac Series Ultrafiltration module can be used as replacement for Dow IntegraPac membrane IP-51XP, IPD-51XP, IP-77XP and IPD-77XP series with compatible dimensions, PVDF hollow fiber UF membrane applies outside-in flow mode, it allows for wide range of feed water, making it a robust UF module.
Retrofit For Veolia ZW500D 600N Strength
Fluoro-Klean DELWED MBR membranes are direct replacement for Veolia ZW500D 340, ZW500D 370 and ZW500D 440 membrane modules with excellent 600N tensile strength, which is same as original membrane modules and there is no fiber breakage issue, 48M 52M MBR cassette is also available with stainless steel 316 material, each cassette can be equipped with 48, 50 and 52 modules, pulsed aeration technology contributes to less energy consumption and plant cost.
Delta Filtration Ultrafiltration module DFPVDFMAX60 is equivalent to Hydranautics HYDRAcap MAX 60 UF membrane, with PVDF membrane of pore size 0.03μm, DFPVDFMAX60 can provide superior retention performance and offer log 4 rejection of Giardia cysts and Cryptosporidium oocysts.
Fluoro-Pure DFPESW10-75 Ultrafiltration module is made with hollow fiber Polyethersulfone(PES) membrane which is naturally hydrophilic and suitable for liquid filtration, it can be used to replace 3M MEMBRANA Liqui-Flux W10 Series UF membrane modules with better cost effectiveness.
DelGuard Series Ultrafiltration module is made with hollow fiber 100% Polyethersulfone(PES) membrane which is naturally hydrophilic and suitable for liquid filtration, it can be used to replace Pentair NORIT X-FLOW XIGA / SEAGUARD Series UF membrane modules in diverse applications including pretreatment for seawater SWRO desalination, drinking water treatment, injection water production, boiler feed water production etc.
Toray HFU-1020AN Membrane Equivalent
Fluoro-Pure DELFIL Ultrafiltration is developed to replace TORAY UF Membrane TORAYFIL series as a more economical replacement solution, 100% compatible with existing UF system, PVDF membrane and PVC housing structure provides good resistance to chlorine and strong acids, which allows for better chemical cleaning to recover membrane flux.
Retrofit For Litree Gemini-U MBR Module
Fluoro-Klean DFHFMBR-GMNU MBR membranes are alternative modules to Litree Gemini-U MBR membrane module with 31㎡ filtration area, this submerged membrane module is specially for sewage treatment process.
Fluoro-Pure DelPac Series Ultrafiltration module is developed to replace Dow IntegraPac membrane IP-51 and IP-77 cross flow ultrafiltration filter with compatible dimensions at much more economical price, compared with PES, PVC and PAN materials, PVDF has better tensile strength and much better resistance to chemicals especially sodium hypochlorite-which is main chemical used for membrane cleaning.
Retrofit For Pentair X-Flow XF75
Delta Filtration Ultrafiltration module DFPES9075 is made with hollow fiber Polyethersulfone(PES) membrane which is naturally hydrophilic, it has compact design with large filtration area up to 75㎡, as economical replacement for Pentair X-Flow XF75 model, DFPES9075 can significantly save operation and maintenance costs for customers.
Hollow fiber UF module allows for larger loading capacity with same space, 0.02μm pore size contributes to good rejection to bacteria and virus, Delta UF modules have been exported to many customers from North America, Europe and Asia etc with positive feedback, OEM label service is available.
Send Inquiry
Delta Filtration Material Co.Ltd.
Sales office: 2811, Block B, Zhongnan CBD, Nantong, Jiangsu, China
Tel: 86-(0)51389157856
WhatsApp: +86-13477006021
Email: sales@delta-filtration.com
www.dt-filtri.com
www.delta-filtration.com
Customer message