Pleat Plus R High Flow Cartridge Filter

Pleat Plus R High Flow Filter is manufactured to replace Pentair Aqualine high flow filter, it fits well in original Aqualine FRP housing. This filter is constructed with polypropylene filter media and inner core, 6.75 inch (171.5 mm) diameter provides high flow rate and reduces filter usage, which can greatly lower capital cost and operating cost. Due to high quality materials, Pleat Plus R high flow filter offers lower pressure drop, less filter change-out and superior particle retention performance, making it an ideal option for protection of downstream membrane system.

Features

　　● Outside to inside structure enhances the flow rate

　　● Big outside diameter reduce change-out time

　　● Multi membrane layer increases removal efficiency

　　● Special pleated design increases the dirt holding capacity

　　● High surface area

　　● Long service life

Application

　　● Pre-RO

　　● Micro electronics process water

　　● Chemical solvents

　　● Drinking water treatment

　　● Cooling water

　　● Food & Beverage

　　● Oil&Gas

Specification

Materials of Construction
Filter Media	Polypropylene
End Caps	Polypropylene
Inside Core	Polypropylene
Outside Core	Netting
O-Rings	Silicone/EPDM/NBR
Dimensions(Nominal)
Nominal Outside Diameter :	6.73inch/171(mm)
Nominal Inside Diameter :	2.99inch/76mm
Length	40inch(1016mm)/60inch(1560mm)
Micron Ratings	1μm,3μm,5μm,10μm,20μm, 30μm,50μm,75μm,100μm
Operating Condition
Maximum Temperature:	Polypropylene 180 ℉ (82 ℃)
Maximum Pressure:	49psi (3.4bar) @ 68 ℉ (20 ℃)
Recommended change-out pressure:	35psi (2.4bar) @ 68 ℉ (20 ℃)

Order Information

Pleat Plus R High Flow Cartridge Filter

Send Inquiry

Contact

Category:

High Flow Filter

Keywords:

Roll Membrane | High Flow Filter | PP Pleated Filter

Tel: +86-513-89157856
Email: sales@delta-filtration.com

Pleat Plus R High Flow Filter is manufactured to replace Pentair Aqualine high flow filter, it fits well in original Aqualine FRP housing. This filter is constructed with polypropylene filter media and inner core, 6.75 inch (171.5 mm) diameter provides high flow rate and reduces filter usage, which can greatly lower capital cost and operating cost. Due to high quality materials, Pleat Plus R high flow filter offers lower pressure drop, less filter change-out and superior particle retention performance, making it an ideal option for protection of downstream membrane system.

Product Description

Features

　　● Outside to inside structure enhances the flow rate

　　● Big outside diameter reduce change-out time

　　● Multi membrane layer increases removal efficiency

　　● Special pleated design increases the dirt holding capacity

　　● High surface area

　　● Long service life

Application

　　● Pre-RO

　　● Micro electronics process water

　　● Chemical solvents

　　● Drinking water treatment

　　● Cooling water

　　● Food & Beverage

　　● Oil&Gas

Specification

Materials of Construction
Filter Media	Polypropylene
End Caps	Polypropylene
Inside Core	Polypropylene
Outside Core	Netting
O-Rings	Silicone/EPDM/NBR
Dimensions(Nominal)
Nominal Outside Diameter :	6.73inch/171(mm)
Nominal Inside Diameter :	2.99inch/76mm
Length	40inch(1016mm)/60inch(1560mm)
Micron Ratings	1μm,3μm,5μm,10μm,20μm, 30μm,50μm,75μm,100μm
Operating Condition
Maximum Temperature:	Polypropylene 180 ℉ (82 ℃)
Maximum Pressure:	49psi (3.4bar) @ 68 ℉ (20 ℃)
Recommended change-out pressure:	35psi (2.4bar) @ 68 ℉ (20 ℃)

Order Information

Pleat Plus R High Flow Cartridge Filter

Related Products

AQUAFLEX HP PVC 0.8mm

8" AQUAFLEX HP PVC 0.8mm UFCLE Ultrafiltration module is used for production of process and potable water as well as WWTP effluent, Delta Filtration DFPES9055 model can be used to replace Pentair AQUAFLEX HP PVC 0.8mm membrane with compatible dimensions which means no piping modification is required.

Retrofit For XIGA XF40

DelGuard Series Ultrafiltration module is made with hollow fiber 100% Polyethersulfone(PES) membrane which is naturally hydrophilic and suitable for liquid filtration, it can be used to replace Pentair NORIT X-FLOW XIGA / SEAGUARD Series UF membrane modules in diverse applications including pretreatment for seawater SWRO desalination, drinking water treatment, injection water production, boiler feed water production etc.

Hyflux Kristal K600B Retrofit

Fluoro-Pure D600ER Series UF filter is developed to replace Hyflux UF Membrane Kristal K600ER model, providing a more economical replacement solution and making sure retrofit module is 100% compatible with existing UF system.

IP-51XP IP-77XP Alternative

Fluoro-Pure DelPac Series Ultrafiltration module can be used as replacement for Dow IntegraPac membrane IP-51XP, IPD-51XP, IP-77XP and IPD-77XP series with compatible dimensions, PVDF hollow fiber UF membrane applies outside-in flow mode, it allows for wide range of feed water, making it a robust UF module.

IP-51 IP-77 Alternative

Fluoro-Pure DelPac Series Ultrafiltration module is developed to replace Dow IntegraPac membrane IP-51 and IP-77 cross flow ultrafiltration filter with compatible dimensions at much more economical price, compared with PES, PVC and PAN materials, PVDF has better tensile strength and much better resistance to chemicals especially sodium hypochlorite-which is main chemical used for membrane cleaning.

Retrofit For Veolia ZW500D 600N Strength

Fluoro-Klean DELWED MBR membranes are direct replacement for Veolia ZW500D 340, ZW500D 370 and ZW500D 440 membrane modules with excellent 600N tensile strength, which is same as original membrane modules and there is no fiber breakage issue, 48M 52M MBR cassette is also available with stainless steel 316 material, each cassette can be equipped with 48, 50 and 52 modules, pulsed aeration technology contributes to less energy consumption and plant cost.

Ultrafiltration DFPVDFMAX60

Delta Filtration Ultrafiltration module DFPVDFMAX60 is equivalent to Hydranautics HYDRAcap MAX 60 UF membrane, with PVDF membrane of pore size 0.03μm, DFPVDFMAX60 can provide superior retention performance and offer log 4 rejection of Giardia cysts and Cryptosporidium oocysts.

Retrofit For 3M Liqui-Flux

Fluoro-Pure DFPESW10-75 Ultrafiltration module is made with hollow fiber Polyethersulfone(PES) membrane which is naturally hydrophilic and suitable for liquid filtration, it can be used to replace 3M MEMBRANA Liqui-Flux W10 Series UF membrane modules with better cost effectiveness.

Retrofit For LG G-Brane P7 MR-MHP07A

Fluoro-Pure DELFIL Ultrafiltration model DFUFPVDF8575G is made with hollow fiber PVDF 75㎡ effective filtration area, it can work as economical replacement for LG G-Brane P7 MR-MHP07A and Synopex G-Brane P7 UF Membrane, typical working pressure is 3 bar. DFUFPVDF8575G UF module is produced with 0.1μm membrane fiber with excellent tensile strength, the module can be operated based on both cross-flow and dead-end mode, it can be used for drinking water process and wastewater reuse applications.

Retrofit VK-0094 Dizzer 5000plus

Fluoro-Pure DFPES700B-50 Ultrafiltration module is an economical replacement for Inge dizzer XL 5000plus(p/n: VK-0094), as an integrated membrane technology provider, we have strict quality control procedure and internal test to make sure Delta module provides equivalent performance to Inge brand.

Retrofit For DuPont IntegraTec MB 60

Delta Filtration DFPES700B-60 is developed as economical replacement for DuPont IntegraTec MB 60 with 100% compatible dimensions, with hydrophilic hollow fiber PES membrane material, DFPES700B-60 offers super high flow rate as well as good retention performance for bacteria, suspended solids and virus, 0.02μm pore size produces high quality permeate for drinking water, process water as well as pretreatment of reverse osmosis system.

Retrofit For 3M Liqui-Cel EXF-14x28 X50 X40