Toray UF Membrane Retrofit

Fluoro-Pure DELFIL Ultrafiltration is developed to replace TORAY UF Membrane TORAYFIL series as a more economical replacement solution, 100% compatible with existing UF system, PVDF membrane and PVC housing structure provides good resistance to chlorine and strong acids, which allows for better chemical cleaning to recover membrane flux. Outside-inside flow direction allows for high tolerance for feed water quality and supports air scour to enhance cleaning efficiency to recover the flux.

Fluoro-Pure DELFIL UF 0.01μm pore size can effectively remove contaminants such as particles, bacteria and virus as well as providing high flow rate performance, when used as pretreatment of reverse osmosis(RO), RO systems can be designed at higher flux, with fewer membranes and vessels leading to lower capital cost for the RO system.

Features

　　● Direct replacement for Toray HFU-2020N

　　● Same operation mode as Toray ultrafiltration

　　● Easy flux recovery after cleaning

　　● Excellent chemical resistance

● Asymmetric structure to enhance service life

Application

　　● Pretreatment for RO desalination

　　● Industrial process water

　　● Drinking water filtration

　　● Oil&Gas water treatment

　　● Tertiary wastewater treatment

● Textile wastewater recycling

Model		DFUFPVDF8572
Specification	Membrane material	PVDF
	Housing material	UPVC
	Pore size(μm)	0.01
	Inner diameter(mm)	0.7
	Outer diameter(mm)	1.3
	Membrane area(m2)	72
	Overall length(mm)	2,160
	Module diameter(mm)	216
	Feed water/Air inlet	DN80
	Filtrate outlet	DN80
	Concentrate/Air outlet	DN65
	Potting material	Epoxy resin
Operation parameter	Max.chlorine concentration(ppm)	2000
	pH range	1 - 10
	Max backwash pressure(Mpa)	0.3
	Max feed pressure(Mpa)	0.3
	Max backwash flow(L/H)	13,500
	Air scour rate(Nm3/h)	7.0 - 9.0
	Design flux(LMH)	50 - 120

FAQ：

Q: Can UF membrane be used for drinking water treatment? What is its advantage compared with RO technology?

A: Yes UF is very good technology to produce clean and safe drinking water, it can effectively remove suspended solid, bacteria and virus while remain helpful minerals to human body but can be rejected by RO technology, it is more energy saving with much lower operation pressure, high design flux makes less consumption of membrane modules and less footprint.

Q: When UF membranes work as pretreatment of RO system, what is its advantage compared with cartridge filters?

A: Ultrafiltration membrane pore size ranges from 0.01μm to 0.1μm, it is much finer than cartridge filters which makes it be able to remove small bacteria and virus and produce much cleaner fluid for RO system and prolong membrane system service life.

UF+RO technology can also be used for wastewater and grey water reuse purpose.

Send Inquiry

Contact

Category:

Toray Equivalent

Keywords:

Roll Membrane | High Flow Filter | PP Pleated Filter

Tel: +86-513-89157856
Email: sales@delta-filtration.com

Fluoro-Pure DELFIL Ultrafiltration is developed to replace TORAY UF Membrane TORAYFIL series as a more economical replacement solution, 100% compatible with existing UF system, PVDF membrane and PVC housing structure provides good resistance to chlorine and strong acids, which allows for better chemical cleaning to recover membrane flux.

Product Description

Features

　　● Direct replacement for Toray HFU-2020N

　　● Same operation mode as Toray ultrafiltration

　　● Easy flux recovery after cleaning

　　● Excellent chemical resistance

● Asymmetric structure to enhance service life

Application

　　● Pretreatment for RO desalination

　　● Industrial process water

　　● Drinking water filtration

　　● Oil&Gas water treatment

　　● Tertiary wastewater treatment

● Textile wastewater recycling

Model		DFUFPVDF8572
Specification	Membrane material	PVDF
	Housing material	UPVC
	Pore size(μm)	0.01
	Inner diameter(mm)	0.7
	Outer diameter(mm)	1.3
	Membrane area(m2)	72
	Overall length(mm)	2,160
	Module diameter(mm)	216
	Feed water/Air inlet	DN80
	Filtrate outlet	DN80
	Concentrate/Air outlet	DN65
	Potting material	Epoxy resin
Operation parameter	Max.chlorine concentration(ppm)	2000
	pH range	1 - 10
	Max backwash pressure(Mpa)	0.3
	Max feed pressure(Mpa)	0.3
	Max backwash flow(L/H)	13,500
	Air scour rate(Nm3/h)	7.0 - 9.0
	Design flux(LMH)	50 - 120

FAQ：

Q: Can UF membrane be used for drinking water treatment? What is its advantage compared with RO technology?

Q: When UF membranes work as pretreatment of RO system, what is its advantage compared with cartridge filters?

UF+RO technology can also be used for wastewater and grey water reuse purpose.

Related Products

AQUAFLEX HP PVC 0.8mm

8" AQUAFLEX HP PVC 0.8mm UFCLE Ultrafiltration module is used for production of process and potable water as well as WWTP effluent, Delta Filtration DFPES9055 model can be used to replace Pentair AQUAFLEX HP PVC 0.8mm membrane with compatible dimensions which means no piping modification is required.

Retrofit For XIGA XF40

DelGuard Series Ultrafiltration module is made with hollow fiber 100% Polyethersulfone(PES) membrane which is naturally hydrophilic and suitable for liquid filtration, it can be used to replace Pentair NORIT X-FLOW XIGA / SEAGUARD Series UF membrane modules in diverse applications including pretreatment for seawater SWRO desalination, drinking water treatment, injection water production, boiler feed water production etc.

Hyflux Kristal K600B Retrofit

Fluoro-Pure D600ER Series UF filter is developed to replace Hyflux UF Membrane Kristal K600ER model, providing a more economical replacement solution and making sure retrofit module is 100% compatible with existing UF system.

IP-51XP IP-77XP Alternative

Fluoro-Pure DelPac Series Ultrafiltration module can be used as replacement for Dow IntegraPac membrane IP-51XP, IPD-51XP, IP-77XP and IPD-77XP series with compatible dimensions, PVDF hollow fiber UF membrane applies outside-in flow mode, it allows for wide range of feed water, making it a robust UF module.

IP-51 IP-77 Alternative

Fluoro-Pure DelPac Series Ultrafiltration module is developed to replace Dow IntegraPac membrane IP-51 and IP-77 cross flow ultrafiltration filter with compatible dimensions at much more economical price, compared with PES, PVC and PAN materials, PVDF has better tensile strength and much better resistance to chemicals especially sodium hypochlorite-which is main chemical used for membrane cleaning.

Ultrafiltration DFPVDFMAX60

Delta Filtration Ultrafiltration module DFPVDFMAX60 is equivalent to Hydranautics HYDRAcap MAX 60 UF membrane, with PVDF membrane of pore size 0.03μm, DFPVDFMAX60 can provide superior retention performance and offer log 4 rejection of Giardia cysts and Cryptosporidium oocysts.

Retrofit For 3M Liqui-Flux

Fluoro-Pure DFPESW10-75 Ultrafiltration module is made with hollow fiber Polyethersulfone(PES) membrane which is naturally hydrophilic and suitable for liquid filtration, it can be used to replace 3M MEMBRANA Liqui-Flux W10 Series UF membrane modules with better cost effectiveness.

DFPES10K9060-Pentair HFS 60 Retrofit

Fluoro-Pure DELFLEX Series DFPES10K9060 Ultrafiltration module is made with hollow fiber Polyethersulfone(PES) membrane with small pore size of 10,000 Dalton Mollecular Weight Cut-Off which can remove colloidal silica from surface water, it can be used to replace Pentair X-Flow HFS 60 tight ultrafiltration membrane with better cost effectiveness.

DELWED 500D MBR Module

Fluoro-Klean DELWED MBR membranes are direct replacement for 500D 340, 500D 370 and 500D 440 membrane modules, with large filtration area and flow capacity, it can be used for large project to save footprint significantly, MBR cassette is also available upon customized design requirement, high cost effectiveness makes DELWED series a good option for new and replacement projects.

Retrofit VK-0094 Dizzer 5000plus

Fluoro-Pure DFPES700B-50 Ultrafiltration module is an economical replacement for Inge dizzer XL 5000plus(p/n: VK-0094), as an integrated membrane technology provider, we have strict quality control procedure and internal test to make sure Delta module provides equivalent performance to Inge brand.

Retrofit For 3M Liqui-Cel EXF-14x28 X50 X40

Retrofit For DuPont IntegraTec XP 51

Fluoro-Pure DFP Series DFUFPVDF9051 is economical replacement for DuPont IntegraTec XP 51(previous Dow SFP-2860) with same dimensions, hydrophilic PVDF membrane can provide stable permeate flow, outside-in flow mode has high tolerance for feed water quality. Ultrafiltration membrane 0.03μm pore size can effectively remove suspended solids and bacteria, thus producing high quality permeate with low SDI and turbidity.