+
  • 1518b62a-890c-4983-b525-dad64dfbd3b3.jpg

Pleat Plus U High Flow

Pleat Plus U high flow filter cartridge is retrofit for Pall Ultipleat high flow filter(e.g:HFU640UY045J), it is constructed by melt blown technology with 6 inch (152 mm) large diameter, it can greatly save water treatment plant footprint and reduce filter change-out cost. Inside-out flow operation keeps all the contaminants inside the filter thus making replacement process more convenient. Available filter media is polypropylene melt blown with pore size from 0.5μm to 100μm. Pleat Plus P series provide a more cost-effective solution.

As a professional high flow filter cartridge manufacturer, Delta Filtration implements strict quality control process which guarantees every filter shipped out is qualified and efficient.

Features

  ● Graded pore structure enhances dirt holding Capacity

  ● Glass fiber construction provides good resistance to both organic and inorganic solvent

  ● High contaminant removal efficiency

  ● PP core available provides excellent strength of cartridge filter

  ● High temperature tolerance

Application

  ● Pretreatment for RO in desalination industry

  ● Amine filtration in Oil&Gas/refinery industry

  ● Chemical solvents

  ● Drinking water treatment

  ● Cooling water

 

Specification

Materials of Construction

Filter Media

Polypropylene

End Caps

Polypropylene

Inside Core

NA or Polypropylene

Outside Cage

NA

O-Rings

Silicone/EPDM/NBR

Dimensions(Nominal)

Nominal Outside Diameter :

6inch/152mm

Nominal Inside Diameter 

3inch/76mm

Length

20 / 40 / 60 / 80 inches

Micron Ratings

1μm,3μm,5μm,10μm,20μm,
30μm,50μm,75μm,100μm

 

Operating Condition

Maximum Temperature:

180℉ (82 ℃)

Maximum Pressure:

58psi (4bar) @ 68 ℉ (20 ℃)

Recommended change-out pressure:

35psi (2.4bar) @ 68 ℉ (20 ℃)

 

Order Information

For Example:   DFHFU 5 - 40 S C

DFHF

Series

Rating

-

Length

Material

O-Ring

Delta Filtration High Flow

U=Pleat Plus U

1=1μm
3=3μm
5=5μm
10=10μm
20=20μm
30=30μm
50=50μm
75=75μm
100=100μm

NA

20=20inch
40=40inch
60=60inch

Blank=Polypropylene

S=Silicone
E=EPDM
N=NBR
V=Viton

 

 

Category:

High Flow Filter

Keywords:

Roll Membrane | High Flow Filter | PP Pleated Filter

Contact Us

Product Description


Pleat Plus U high flow filter cartridge is retrofit for Pall Ultipleat high flow filter(e.g:HFU640UY045J), it is constructed by melt blown technology with 6 inch (152 mm) large diameter, it can greatly save water treatment plant footprint and reduce filter change-out cost. Inside-out flow operation keeps all the contaminants inside the filter thus making replacement process more convenient. Available filter media is polypropylene melt blown with pore size from 0.5μm to 100μm. Pleat Plus P series provide a more cost-effective solution.

As a professional high flow filter cartridge manufacturer, Delta Filtration implements strict quality control process which guarantees every filter shipped out is qualified and efficient.

Features

  ● Graded pore structure enhances dirt holding Capacity

  ● Glass fiber construction provides good resistance to both organic and inorganic solvent

  ● High contaminant removal efficiency

  ● PP core available provides excellent strength of cartridge filter

  ● High temperature tolerance

Application

  ● Pretreatment for RO in desalination industry

  ● Amine filtration in Oil&Gas/refinery industry

  ● Chemical solvents

  ● Drinking water treatment

  ● Cooling water

 

Specification

Materials of Construction

Filter Media

Polypropylene

End Caps

Polypropylene

Inside Core

NA or Polypropylene

Outside Cage

NA

O-Rings

Silicone/EPDM/NBR

Dimensions(Nominal)

Nominal Outside Diameter :

6inch/152mm

Nominal Inside Diameter 

3inch/76mm

Length

20 / 40 / 60 / 80 inches

Micron Ratings

1μm,3μm,5μm,10μm,20μm,
30μm,50μm,75μm,100μm

 

Operating Condition

Maximum Temperature:

180℉ (82 ℃)

Maximum Pressure:

58psi (4bar) @ 68 ℉ (20 ℃)

Recommended change-out pressure:

35psi (2.4bar) @ 68 ℉ (20 ℃)

 

Order Information

For Example:   DFHFU 5 - 40 S C

DFHF

Series

Rating

-

Length

Material

O-Ring

Delta Filtration High Flow

U=Pleat Plus U

1=1μm
3=3μm
5=5μm
10=10μm
20=20μm
30=30μm
50=50μm
75=75μm
100=100μm

NA

20=20inch
40=40inch
60=60inch

Blank=Polypropylene

S=Silicone
E=EPDM
N=NBR
V=Viton

 

 

Related Products


AQUAFLEX HP PVC 0.8mm


8" AQUAFLEX HP PVC 0.8mm UFCLE Ultrafiltration module is used for production of process and potable water as well as WWTP effluent, Delta Filtration DFPES9055 model can be used to replace Pentair AQUAFLEX HP PVC 0.8mm membrane with compatible dimensions which means no piping modification is required.

Retrofit For XIGA XF40


DelGuard Series Ultrafiltration module is made with hollow fiber 100% Polyethersulfone(PES) membrane which is naturally hydrophilic and suitable for liquid filtration, it can be used to replace Pentair NORIT X-FLOW XIGA / SEAGUARD Series UF membrane modules in diverse applications including pretreatment for seawater SWRO desalination, drinking water treatment, injection water production, boiler feed water production etc.

Hyflux Kristal K600B Retrofit


Fluoro-Pure D600ER Series UF filter is developed to replace Hyflux UF Membrane Kristal K600ER model, providing a more economical replacement solution and making sure retrofit module is 100% compatible with existing UF system.

IP-51XP IP-77XP Alternative


Fluoro-Pure DelPac Series Ultrafiltration module can be used as replacement for Dow IntegraPac membrane IP-51XP, IPD-51XP, IP-77XP and IPD-77XP series with compatible dimensions, PVDF hollow fiber UF membrane applies outside-in flow mode, it allows for wide range of feed water, making it a robust UF module.

IP-51 IP-77 Alternative


Fluoro-Pure DelPac Series Ultrafiltration module is developed to replace Dow IntegraPac membrane IP-51 and IP-77 cross flow ultrafiltration filter with compatible dimensions at much more economical price, compared with PES, PVC and PAN materials, PVDF has better tensile strength and much better resistance to chemicals especially sodium hypochlorite-which is main chemical used for membrane cleaning.

Retrofit For Veolia ZW500D 600N Strength


Fluoro-Klean DELWED MBR membranes are direct replacement for Veolia ZW500D 340, ZW500D 370 and ZW500D 440 membrane modules with excellent 600N tensile strength, which is same as original membrane modules and there is no fiber breakage issue, 48M 52M MBR cassette is also available with stainless steel 316 material, each cassette can be equipped with 48, 50 and 52 modules, pulsed aeration technology contributes to less energy consumption and plant cost.

Ultrafiltration DFPVDFMAX60


Delta Filtration Ultrafiltration module DFPVDFMAX60 is equivalent to Hydranautics HYDRAcap MAX 60 UF membrane, with PVDF membrane of pore size 0.03μm, DFPVDFMAX60 can provide superior retention performance and offer log 4 rejection of Giardia cysts and Cryptosporidium oocysts.

Retrofit For 3M Liqui-Flux


Fluoro-Pure DFPESW10-75 Ultrafiltration module is made with hollow fiber Polyethersulfone(PES) membrane which is naturally hydrophilic and suitable for liquid filtration, it can be used to replace 3M MEMBRANA Liqui-Flux W10 Series UF membrane modules with better cost effectiveness.

Retrofit For LG G-Brane P7 MR-MHP07A


Fluoro-Pure DELFIL Ultrafiltration model DFUFPVDF8575G is made with hollow fiber PVDF 75㎡ effective filtration area, it can work as economical replacement for LG G-Brane P7 MR-MHP07A and Synopex G-Brane P7 UF Membrane, typical working pressure is 3 bar. DFUFPVDF8575G UF module is produced with 0.1μm membrane fiber with excellent tensile strength, the module can be operated based on both cross-flow and dead-end mode, it can be used for drinking water process and wastewater reuse applications. 

Retrofit VK-0094 Dizzer 5000plus


Fluoro-Pure DFPES700B-50 Ultrafiltration module is an economical replacement for Inge dizzer XL 5000plus(p/n: VK-0094), as an integrated membrane technology provider, we have strict quality control procedure and internal test to make sure Delta module provides equivalent performance to Inge brand.

Retrofit For DuPont IntegraTec MB 60


Delta Filtration DFPES700B-60 is developed as economical replacement for DuPont IntegraTec MB 60 with 100% compatible dimensions, with hydrophilic hollow fiber PES membrane material, DFPES700B-60 offers super high flow rate as well as good retention performance for bacteria, suspended solids and virus, 0.02μm pore size produces high quality permeate for drinking water, process water as well as pretreatment of reverse osmosis system.

Send Inquiry