Nylon filter cartridge

Poly Pleat Nylon filter cartridge is constructed with hydrophilic Nylon 66 membrane and PP hardware which makes it suitable for wide applications. It is manufactured in clean room with superior materials which allows for no fiber release and minimum extractables. Single layer membrane provides high flow rate and low pressure drop. PolyPleat NY66 membrane filter is 100% integrity tested before shipment.

DELTA certifies that the material contained in PolyPleat NY66 pleated filters meet U.S. FDA requirements for food contact under the applicable regulations in 21 CFR.

Features

　　● Absolute rating performance

　　● Large filtration area

　　● 100% Integrity tested

　　● Easy wetting Nylon 66 membrane

　　● Steam sterilization available

Application

　　● Photoresist filtration

　　● Electronic Ultra Pure Water

　　● Chemical solvents

　　● Food and beverage

Regulation compliance

　　● Bacterial Endotoxin: Aqueous extraction of autocalved filter contains <0.25 EU/ml as by LAL test

　　● USP Class VI-121°C plastics

　　● Particle Shedding: Autoclaved filter effluent meet the USP<788>for large volume Injections.

　　● All materials meet the FDA Indirect Food Additive requirements cited in 21 CFR 177-182.

Retrofit for Nylon membrane pleated filters from other vendors:

Brand	Series
Pall	Ultipor® N66
3M Cuno	LifeASSURE™ BLA Series
Porvair Filtration	Hydrofil™ Nylon 6.6
Suez	Memtrex NY
Eaton	LOFMEM N

Materials of Construction
Filter Media	Nylon 66
End Caps	Polypropylene
Core	Polypropylene
End Cap	222 Flat/222 Fin/226 Flat/226 Fin/DOE
O-Rings	Silicone/EPDM/Viton/NBR
Dimensions(Nominal)
Nominal Outside Diameter :	2.68inch/68±1(mm)
Nominal Inside Diameter	1.26inch/32（mm）
Micron Ratings	0.1μm,0.2μm,0.45μm,0.65μm, 1.0μm
Filtration Area	0.6m²(10’’)

Operating Condition
Maximum Temperature:	180℉ (82 ℃)
Maximum Pressure:	70psi (5bar) @ 68 ℉ (20 ℃)
Recommended change-out pressure:	35psi (2.4bar) @ 68 ℉ (20 ℃)

Sterilization
Hot Water:	85 ℃ 60min. 100 cycles
Steam In Place:	121 ℃ 30min. 100 cycles
Autoclave:	121 ℃ 30min. 100 cycles

Order Information

For Example: DFNY 02 - 40 F S

Series

Rating

Length

End Cap

O-Ring

Inner Core

Delta Filtration

NY=Nylon

01=0.1μm

02=0.2μm

045=0.45μm

065=0.65μm

1=1μm

10=10inch

20=20inch

30=30inch

40=40inch

50=50inch

60=60inch

70=70inch

A=222/Flat

B=222/Fin

C=226/Flat

D=226/Fin

D2=226/Fin with SS316 insert

F=DOE

S=Silicone

E=EPDM

V=Viton

N=NBR

Blank=Polypropylene

S=SS304

L=SS316

Send Inquiry

Contact

Category:

Process Filter

Keywords:

Roll Membrane | High Flow Filter | PP Pleated Filter

Tel: +86-513-89157856
Email: sales@delta-filtration.com

Poly Pleat Nylon filter cartridge is constructed with hydrophilic Nylon 66 membrane and PP hardware which makes it suitable for wide applications. It is manufactured in clean room with superior materials which allows for no fiber release and minimum extractables. Single layer membrane provides high flow rate and low pressure drop. PolyPleat NY66 membrane filter is 100% integrity tested before shipment.

Product Description

DELTA certifies that the material contained in PolyPleat NY66 pleated filters meet U.S. FDA requirements for food contact under the applicable regulations in 21 CFR.

Features

　　● Absolute rating performance

　　● Large filtration area

　　● 100% Integrity tested

　　● Easy wetting Nylon 66 membrane

　　● Steam sterilization available

Application

　　● Photoresist filtration

　　● Electronic Ultra Pure Water

　　● Chemical solvents

　　● Food and beverage

Regulation compliance

　　● Bacterial Endotoxin: Aqueous extraction of autocalved filter contains <0.25 EU/ml as by LAL test

　　● USP Class VI-121°C plastics

　　● Particle Shedding: Autoclaved filter effluent meet the USP<788>for large volume Injections.

　　● All materials meet the FDA Indirect Food Additive requirements cited in 21 CFR 177-182.

Retrofit for Nylon membrane pleated filters from other vendors:

Brand	Series
Pall	Ultipor® N66
3M Cuno	LifeASSURE™ BLA Series
Porvair Filtration	Hydrofil™ Nylon 6.6
Suez	Memtrex NY
Eaton	LOFMEM N

Materials of Construction
Filter Media	Nylon 66
End Caps	Polypropylene
Core	Polypropylene
End Cap	222 Flat/222 Fin/226 Flat/226 Fin/DOE
O-Rings	Silicone/EPDM/Viton/NBR
Dimensions(Nominal)
Nominal Outside Diameter :	2.68inch/68±1(mm)
Nominal Inside Diameter	1.26inch/32（mm）
Micron Ratings	0.1μm,0.2μm,0.45μm,0.65μm, 1.0μm
Filtration Area	0.6m²(10’’)

Operating Condition
Maximum Temperature:	180℉ (82 ℃)
Maximum Pressure:	70psi (5bar) @ 68 ℉ (20 ℃)
Recommended change-out pressure:	35psi (2.4bar) @ 68 ℉ (20 ℃)

Sterilization
Hot Water:	85 ℃ 60min. 100 cycles
Steam In Place:	121 ℃ 30min. 100 cycles
Autoclave:	121 ℃ 30min. 100 cycles

Order Information

For Example: DFNY 02 - 40 F S

Series

Rating

Length

End Cap

O-Ring

Inner Core

Delta Filtration

NY=Nylon

01=0.1μm

02=0.2μm

045=0.45μm

065=0.65μm

1=1μm

10=10inch

20=20inch

30=30inch

40=40inch

50=50inch

60=60inch

70=70inch

A=222/Flat

B=222/Fin

C=226/Flat

D=226/Fin

D2=226/Fin with SS316 insert

F=DOE

S=Silicone

E=EPDM

V=Viton

N=NBR

Blank=Polypropylene

S=SS304

L=SS316

Related Products

Brackish Water Reverse Osmosis

Delta Filtration brackish water ro membranes are specially developed for brackish water filtration process with TDS range 1000~5000 mg/L, standard size 4inch / 8inch diameter and 40inch length, OEM service is available.

Low Pressure Reverse Osmosis

Delta Pure reverse osmosis low water pressure membrane element is developed for energy saving applications with low operation pressure. It has the characteristics of high flow and excellent rejection performance in salt rejection. It is especially suitable for the preparation of ultra pure water in Pharmaceutical, Electronics and Power industry etc. DFLP8040 has large filtration area of 37m2 with 99.5% stable salt rejection rate.

Sea Water RO

Delta Filtration seawater RO membranes are manufactured under ISO 9001 management system, 100,000 pcs annual production capacity for industrial RO guarantees fast delivery time from Shanghai port.

Dow IP-51XP IP-77XP Alternative

Fluoro-Pure DelPac Series Ultrafiltration module can be used as replacement for Dow IntegraPac membrane IP-51XP, IPD-51XP, IP-77XP and IPD-77XP series with compatible dimensions, PVDF hollow fiber UF membrane applies outside-in flow mode, it allows for wide range of feed water, making it a robust UF module.

Dow UF Membrane Retrofit

Fluoro-Pure DFP Series Ultrafiltration module is developed to replace Dow Ultrafiltration Membrane SFP 2860 and 2880 with same dimensions and operation principle, compared with PES, PVC and PAN materials, PVDF has much better resistance to chemicals especially sodium hypochlorite-which is main chemical used for membrane cleaning.

Dow IP-51 IP-77 Alternative

Fluoro-Pure DelPac Series Ultrafiltration module is developed to replace Dow IntegraPac membrane IP-51 and IP-77 cross flow ultrafiltration filter with compatible dimensions at much more economical price, compared with PES, PVC and PAN materials, PVDF has better tensile strength and much better resistance to chemicals especially sodium hypochlorite-which is main chemical used for membrane cleaning.

Ultrafiltration DFPVDFMAX60

Delta Filtration Ultrafiltration module DFPVDFMAX60 is equivalent to Hydranautics HYDRAcap MAX 60 UF membrane, with PVDF membrane of pore size 0.03μm, DFPVDFMAX60 can provide superior retention performance and offer log 4 rejection of Giardia cysts and Cryptosporidium oocysts.

Retrofit For 3M Liqui-Flux

Fluoro-Pure DFPESW10-75 Ultrafiltration module is made with hollow fiber Polyethersulfone(PES) membrane which is naturally hydrophilic and suitable for liquid filtration, it can be used to replace 3M MEMBRANA Liqui-Flux W10 Series UF membrane modules with better cost effectiveness.

Fluoro-Pure DELWED PES Module

Fluoro-Pure DELWED Ultrafiltration module is an economical membrane element with hydrophilic PES membrane design and robust hollow fiber structure, as an integrated membrane technology provider, we have strict quality control procedure and internal test to make sure Delta module provides equivalent performance to leading brands. With 0.02μm pore size, DFPES700B-60 can effectively retain particles, bacteria and virus and produce clean water which makes is suitable for drinking water treatment, pre-treatment for reverse osmosis, industrial wastewater treatment etc.

Retrofit For Koch Targa II Cartridge

Pentair X-Flow Aquaflex Retrofit

Fluoro-Pure DELFLEX Series Ultrafiltration module is made with hollow fiber Polyethersulfone(PES) membrane which is naturally hydrophilic and suitable for liquid filtration, it can be used to replace Pentair UF membrane or Norit UF Aquaflex Series PES UF membrane modules with better cost effectiveness.

Inge VK-0094 Dizzer 5000plus Retrofit

Fluoro-Pure DFPES700B-50 Ultrafiltration module is an economical replacement for Inge dizzer XL 5000plus(p/n: VK-0094), as an integrated membrane technology provider, we have strict quality control procedure and internal test to make sure Delta module provides equivalent performance to Inge brand.