Poly Classic B Melt Blown Cartridge Filter

Poly Classic B melt blown cartridge filter is pure polypropylene of special structure with great dirty holding capacity depth filter, which is an exceptional value for general applications where long life, high flow rate purity and low change-out frequency are required. The large diameter design allows this melt blown filter to have an extremely large filtration surface area and high flow rate.Certainly,This design reduces the number of filter and the size of the system.Large flow rate and long service life save the cost.

Features

　　● Big area enhances dirt holding capacity

　　● High contaminant removal efficiency

　　● High flow rate

　　● Wide application

　　● Good chemical compatibility

　　● Low pressure drop

　　● Long service life

Application

　　● Pre-RO

　　● Electronic

　　● Oil injection water

　　● Chemical solvents

　　● Drinking water treatment

　　● Cooling water

Specification

Materials of Construction
Filter Media	Polypropylene
Core	NA or Polypropylene
End Cap	NA
O-Rings	NA
Dimensions(Nominal)
Nominal Outside Diameter :	4.5inch/114±1(mm)
Nominal Inside Diameter	1.1inch/28(mm)
Length	10inch,20inch,30inch,40inch, 50inch,60inch
Micron Ratings	1μm,3μm,5μm,10μm,20μm, 30μm,50μm,75μm,100μm
Operating Condition
Maximum Temperature:	180℉ (82 ℃)
Maximum Pressure:	50psi (3.5bar) @ 68 ℉ (20 ℃)
Recommended change-out pressure:	35psi (2.4bar) @ 68 ℉ (20 ℃)

Order Information

Send Inquiry

Contact

Category:

Depth Filter

Keywords:

Roll Membrane | High Flow Filter | PP Pleated Filter

Tel: +86-513-89157856
Email: sales@delta-filtration.com

Product Description

Features

　　● Big area enhances dirt holding capacity

　　● High contaminant removal efficiency

　　● High flow rate

　　● Wide application

　　● Good chemical compatibility

　　● Low pressure drop

　　● Long service life

Application

　　● Pre-RO

　　● Electronic

　　● Oil injection water

　　● Chemical solvents

　　● Drinking water treatment

　　● Cooling water

Specification

Materials of Construction
Filter Media	Polypropylene
Core	NA or Polypropylene
End Cap	NA
O-Rings	NA
Dimensions(Nominal)
Nominal Outside Diameter :	4.5inch/114±1(mm)
Nominal Inside Diameter	1.1inch/28(mm)
Length	10inch,20inch,30inch,40inch, 50inch,60inch
Micron Ratings	1μm,3μm,5μm,10μm,20μm, 30μm,50μm,75μm,100μm
Operating Condition
Maximum Temperature:	180℉ (82 ℃)
Maximum Pressure:	50psi (3.5bar) @ 68 ℉ (20 ℃)
Recommended change-out pressure:	35psi (2.4bar) @ 68 ℉ (20 ℃)

Order Information

Related Products

AQUAFLEX HP PVC 0.8mm

8" AQUAFLEX HP PVC 0.8mm UFCLE Ultrafiltration module is used for production of process and potable water as well as WWTP effluent, Delta Filtration DFPES9055 model can be used to replace Pentair AQUAFLEX HP PVC 0.8mm membrane with compatible dimensions which means no piping modification is required.

Hyflux Kristal K600B Retrofit

Fluoro-Pure D600ER Series UF filter is developed to replace Hyflux UF Membrane Kristal K600ER model, providing a more economical replacement solution and making sure retrofit module is 100% compatible with existing UF system.

IP-51XP IP-77XP Alternative

Fluoro-Pure DelPac Series Ultrafiltration module can be used as replacement for Dow IntegraPac membrane IP-51XP, IPD-51XP, IP-77XP and IPD-77XP series with compatible dimensions, PVDF hollow fiber UF membrane applies outside-in flow mode, it allows for wide range of feed water, making it a robust UF module.

IP-51 IP-77 Alternative

Fluoro-Pure DelPac Series Ultrafiltration module is developed to replace Dow IntegraPac membrane IP-51 and IP-77 cross flow ultrafiltration filter with compatible dimensions at much more economical price, compared with PES, PVC and PAN materials, PVDF has better tensile strength and much better resistance to chemicals especially sodium hypochlorite-which is main chemical used for membrane cleaning.

Ultrafiltration DFPVDFMAX60

Delta Filtration Ultrafiltration module DFPVDFMAX60 is equivalent to Hydranautics HYDRAcap MAX 60 UF membrane, with PVDF membrane of pore size 0.03μm, DFPVDFMAX60 can provide superior retention performance and offer log 4 rejection of Giardia cysts and Cryptosporidium oocysts.

Retrofit For 3M Liqui-Flux

Fluoro-Pure DFPESW10-75 Ultrafiltration module is made with hollow fiber Polyethersulfone(PES) membrane which is naturally hydrophilic and suitable for liquid filtration, it can be used to replace 3M MEMBRANA Liqui-Flux W10 Series UF membrane modules with better cost effectiveness.

Retrofit For XIGA XF40

DelGuard Series Ultrafiltration module is made with hollow fiber 100% Polyethersulfone(PES) membrane which is naturally hydrophilic and suitable for liquid filtration, it can be used to replace Pentair NORIT X-FLOW XIGA / SEAGUARD Series UF membrane modules in diverse applications including pretreatment for seawater SWRO desalination, drinking water treatment, injection water production, boiler feed water production etc.

DELWED 500D MBR Module

Fluoro-Klean DELWED MBR membranes are direct replacement for 500D 340, 500D 370 and 500D 440 membrane modules, with large filtration area and flow capacity, it can be used for large project to save footprint significantly, MBR cassette is also available upon customized design requirement, high cost effectiveness makes DELWED series a good option for new and replacement projects.

Retrofit VK-0094 Dizzer 5000plus

Fluoro-Pure DFPES700B-50 Ultrafiltration module is an economical replacement for Inge dizzer XL 5000plus(p/n: VK-0094), as an integrated membrane technology provider, we have strict quality control procedure and internal test to make sure Delta module provides equivalent performance to Inge brand.

Retrofit For 3M Liqui-Cel EXF-14x28 X50 X40

Retrofit For DuPont IntegraTec XP 51

Fluoro-Pure DFP Series DFUFPVDF9051 is economical replacement for DuPont IntegraTec XP 51(previous Dow SFP-2860) with same dimensions, hydrophilic PVDF membrane can provide stable permeate flow, outside-in flow mode has high tolerance for feed water quality. Ultrafiltration membrane 0.03μm pore size can effectively remove suspended solids and bacteria, thus producing high quality permeate with low SDI and turbidity.

Retrofit For Koch Targa II 10072-35

Delta Filtration PES Ultrafiltration module DFTGAPES10072 is equivalent to Koch Targa II 10072-35 ultrafiltration cartridge with same dimensions and equivalent performance, with 81㎡ large filtration area, it can be used in large water treatment plants with limited footprint, including mining industry, oil&gas, power plants etc.