Poly Classic A Melt Blown Cartridge Filter
Poly Classic A Melt Blown cartridge filter is made with 100% polypropylene material, it provides superior flow rate and excellent dirt holding performance,which offers good protection for downstream membrane systems. Graded pore structure design can greatly increase its dirt holding capacity and improve its service life.In the manufacture of these filter cartridges, all polypropylene components meet USP, Class VI(121℃/250˚F) toxicity criteria (gaskets/O-rings excluded). The deep filtration structure with thin outer and dense internal gradient has high removal efficiency, which can effectively remove suspended substances, particles, rust and other impurities in the liquid flow.
Features
● Graded pore structure enhances dirt holding capacity
● All PP construction provides good resistance to both organic and inorganic solvent
● High contaminant removal efficiency
● PP core provides excellent strength of cartridge filter
● Long service life
Application
● Pre-RO
● Electronic
● Chemical solvents
● Drinking water treatment
● Cooling water
Specification
Materials of Construction |
|
Filter Media |
Polypropylene |
End Cap Material |
NA or Polypropylene |
Core |
NA or Polypropylene |
End Cap |
222 Flat/222 Fin/226 Flat/226 Fin/DOE |
O-Rings |
Silicone/EPDM/Viton/NBR |
Dimensions(Nominal) |
|
Nominal Outside Diameter : |
2.5inch/63±1(mm) |
Nominal Inside Diameter |
1.1inch/28mm) |
Length |
10inch,20inch,30inch,40inch, |
Micron Ratings |
1μm,3μm,5μm,10μm,20μm, |
Operating Condition |
|
Maximum Temperature: |
180℉ (82 ℃) |
Maximum Pressure: |
50psi (3.5bar) @ 68 ℉ (20 ℃) |
Recommended change-out pressure: |
35psi (2.4bar) @ 68 ℉ (20 ℃) |
Order Information
Category:
Depth Filter
Keywords:
Roll Membrane | High Flow Filter | PP Pleated Filter
Contact Us
Tel: +86-513-89157856
Email: sales@delta-filtration.com
Product Description
Poly Classic A Melt Blown cartridge filter is made with 100% polypropylene material, it provides superior flow rate and excellent dirt holding performance,which offers good protection for downstream membrane systems. Graded pore structure design can greatly increase its dirt holding capacity and improve its service life.In the manufacture of these filter cartridges, all polypropylene components meet USP, Class VI(121℃/250˚F) toxicity criteria (gaskets/O-rings excluded). The deep filtration structure with thin outer and dense internal gradient has high removal efficiency, which can effectively remove suspended substances, particles, rust and other impurities in the liquid flow.
Features
● Graded pore structure enhances dirt holding capacity
● All PP construction provides good resistance to both organic and inorganic solvent
● High contaminant removal efficiency
● PP core provides excellent strength of cartridge filter
● Long service life
Application
● Pre-RO
● Electronic
● Chemical solvents
● Drinking water treatment
● Cooling water
Specification
Materials of Construction |
|
Filter Media |
Polypropylene |
End Cap Material |
NA or Polypropylene |
Core |
NA or Polypropylene |
End Cap |
222 Flat/222 Fin/226 Flat/226 Fin/DOE |
O-Rings |
Silicone/EPDM/Viton/NBR |
Dimensions(Nominal) |
|
Nominal Outside Diameter : |
2.5inch/63±1(mm) |
Nominal Inside Diameter |
1.1inch/28mm) |
Length |
10inch,20inch,30inch,40inch, |
Micron Ratings |
1μm,3μm,5μm,10μm,20μm, |
Operating Condition |
|
Maximum Temperature: |
180℉ (82 ℃) |
Maximum Pressure: |
50psi (3.5bar) @ 68 ℉ (20 ℃) |
Recommended change-out pressure: |
35psi (2.4bar) @ 68 ℉ (20 ℃) |
Order Information
Related Products
Send Inquiry