Poly Pleat K Backwash Pleated Cartridge Filter
Poly Pleat K Backwash Pleated cartridge filter is mainly designed for power plant industry, it is manufactured with 100% polypropylene filter media and hardware. High retention efficiency makes it suitable as prefilter of reverse osmosis system, compared with conventional disposal filter, backwash design offers an economical solution for condensate water filtration. Available length is 60 inch and 70 inch, stainless steel thread connection greatly improves its mechanical strength.
Features
● Large surface area reduce the cost of use and replacement time
● Wide chemical compatibility for different application
● Backwash increase the life time
● Grade filtration design ensure effective particle removal
● High dirt holding capacity
Application
● Sea Water Desalination
● Power Plant
● Produced water
● Oil&Gas
Specification
Materials of Construction |
|
Filter Media |
Polypropylene |
Core |
Polypropylene |
Outside Core |
Polypropylene |
End Cap |
Screw thread/222 Fin |
O-Rings |
Silicone/EPDM/Viton/NBR |
Dimensions(Nominal) |
|
Nominal Outside Diameter : |
2.68inch/68±1(mm) |
Nominal Inside Diameter |
1.26nch/32(mm) |
Length |
60inch(1524mm),70inch(1778mm) |
Micron Ratings |
1μm,3μm,5μm,10μm,20μm,30μm,50μm,100μm |
Operating Condition |
|
Maximum Temperature: |
180℉ (82 ℃) |
Maximum Pressure: |
58psi (4bar) @ 68 ℉ (20 ℃) |
Recommended change-out pressure: |
35psi (2.4bar) @ 68 ℉ (20 ℃) |
Order Information
Category:
Pleated Filter
Keywords:
Roll Membrane | High Flow Filter | PP Pleated Filter
Contact Us
Tel: +86-513-89157856
Email: sales@delta-filtration.com
Product Description
Poly Pleat K Backwash Pleated cartridge filter is mainly designed for power plant industry, it is manufactured with 100% polypropylene filter media and hardware. High retention efficiency makes it suitable as prefilter of reverse osmosis system, compared with conventional disposal filter, backwash design offers an economical solution for condensate water filtration. Available length is 60 inch and 70 inch, stainless steel thread connection greatly improves its mechanical strength.
Features
● Large surface area reduce the cost of use and replacement time
● Wide chemical compatibility for different application
● Backwash increase the life time
● Grade filtration design ensure effective particle removal
● High dirt holding capacity
Application
● Sea Water Desalination
● Power Plant
● Produced water
● Oil&Gas
Specification
Materials of Construction |
|
Filter Media |
Polypropylene |
Core |
Polypropylene |
Outside Core |
Polypropylene |
End Cap |
Screw thread/222 Fin |
O-Rings |
Silicone/EPDM/Viton/NBR |
Dimensions(Nominal) |
|
Nominal Outside Diameter : |
2.68inch/68±1(mm) |
Nominal Inside Diameter |
1.26nch/32(mm) |
Length |
60inch(1524mm),70inch(1778mm) |
Micron Ratings |
1μm,3μm,5μm,10μm,20μm,30μm,50μm,100μm |
Operating Condition |
|
Maximum Temperature: |
180℉ (82 ℃) |
Maximum Pressure: |
58psi (4bar) @ 68 ℉ (20 ℃) |
Recommended change-out pressure: |
35psi (2.4bar) @ 68 ℉ (20 ℃) |
Order Information
Related Products
Send Inquiry