Poly Classic C Melt Blown Cartridge Filter

Poly Classic C melt blown cartridge filter is pure polypropylene with obvious gradient structure depth filter, which welded by Superfine fibers inside and cruder fibers at the surface. Groove surface treatment brings larger surface area and longer service life. Poly Classic C filter is designed with the structure of thin outside and dense inside, and the surface has grooved, which greatly improves the effective filtering area of the filter and has strong pollution absorption capacity, and its dirt holding capacity is more than 2-3 times that of common melt-blown filter .The groove design also reduces the initial pressure drop, the flux is large, especially suitable for liquid filtration with high content of suspended material.

Features

　　● Graded pore structure enhances dirt holding capacity

　　● All PP construction provides good resistance to both organic and inorganic solvent

　　● Grooved surface enhances removal efficiency

　　● Free of binders,additives and lubricants

　　● Long service life

　　● Manufactured by FDA grade polypropylene

Application

　　● Pre-RO

　　● Electronic

　　● Chemical solvents

　　● Food and Beverage Processing

　　● Cooling water

Specification

Materials of Construction
Filter Media	Polypropylene
End Cap Material	NA or Polypropylene
Core	NA or Polypropylene
End Cap	222 Flat/222 Fin/226 Flat/226 Fin/DOE
O-Rings	Silicone/EPDM/Viton/NBR
Dimensions(Nominal)
Nominal Outside Diameter :	2.5inch/63±1(mm)
Nominal Inside Diameter	1.1inch/28mm)
Length	10inch,20inch,30inch,40inch, 50inch,60inch,70inch
Micron Ratings	1μm,3μm,5μm,10μm,20μm, 30μm,50μm,75μm,100μm
Operating Condition
Maximum Temperature:	180℉ (82 ℃)
Maximum Pressure:	56psi (4bar) @ 68 ℉ (20 ℃)
Recommended change-out pressure:	35psi (2.4bar) @ 68 ℉ (20 ℃)

Order Information

Send Inquiry

Contact

Category:

Depth Filter

Keywords:

Roll Membrane | High Flow Filter | PP Pleated Filter

Tel: +86-513-89157856
Email: sales@delta-filtration.com

Product Description

Features

　　● Graded pore structure enhances dirt holding capacity

　　● All PP construction provides good resistance to both organic and inorganic solvent

　　● Grooved surface enhances removal efficiency

　　● Free of binders,additives and lubricants

　　● Long service life

　　● Manufactured by FDA grade polypropylene

Application

　　● Pre-RO

　　● Electronic

　　● Chemical solvents

　　● Food and Beverage Processing

　　● Cooling water

Specification

Materials of Construction
Filter Media	Polypropylene
End Cap Material	NA or Polypropylene
Core	NA or Polypropylene
End Cap	222 Flat/222 Fin/226 Flat/226 Fin/DOE
O-Rings	Silicone/EPDM/Viton/NBR
Dimensions(Nominal)
Nominal Outside Diameter :	2.5inch/63±1(mm)
Nominal Inside Diameter	1.1inch/28mm)
Length	10inch,20inch,30inch,40inch, 50inch,60inch,70inch
Micron Ratings	1μm,3μm,5μm,10μm,20μm, 30μm,50μm,75μm,100μm
Operating Condition
Maximum Temperature:	180℉ (82 ℃)
Maximum Pressure:	56psi (4bar) @ 68 ℉ (20 ℃)
Recommended change-out pressure:	35psi (2.4bar) @ 68 ℉ (20 ℃)

Order Information

Related Products

Dow SFP-2880 2880XP Alternative

Fluoro-Pure DFP Series Ultrafiltration module is developed to replace Dow Ultrafiltration Membrane SFP 2880 with same dimensions and operation principle, compared with PES, PVC and PAN materials, PVDF has much better resistance to chemicals especially sodium hypochlorite-which is main chemical used for membrane cleaning.

Pentair X-Flow Aquaflex HP 55 Retrofit

Fluoro-Free DELFLEX Series Ultrafiltration module DFPES9055 model can work as economical replacement for Pentair Norit Aquaflex HP 55 with better cost effectiveness, no modification is required because of its compatible dimensions, DFPES9055 can well fit into original membrane systems. Hollow fiber UF module allows for larger loading capacity with same space, 0.02μm pore size contributes to good rejection to bacteria and virus, PES material has very good hydrophilic feature and less membrane fouling.

Hyflux Kristal K600B Retrofit

Fluoro-Pure D600ER Series UF filter is developed to replace Hyflux UF Membrane Kristal K600ER model, providing a more economical replacement solution and making sure retrofit module is 100% compatible with existing UF system.

IP-51XP IP-77XP Alternative

Fluoro-Pure DelPac Series Ultrafiltration module can be used as replacement for Dow IntegraPac membrane IP-51XP, IPD-51XP, IP-77XP and IPD-77XP series with compatible dimensions, PVDF hollow fiber UF membrane applies outside-in flow mode, it allows for wide range of feed water, making it a robust UF module.

Retrofit For Veolia ZW500D 600N Strength

Fluoro-Klean DELWED MBR membranes are direct replacement for Veolia ZW500D 340, ZW500D 370 and ZW500D 440 membrane modules with excellent 600N tensile strength, which is same as original membrane modules and there is no fiber breakage issue, 48M 52M MBR cassette is also available with stainless steel 316 material, each cassette can be equipped with 48, 50 and 52 modules, pulsed aeration technology contributes to less energy consumption and plant cost.

Ultrafiltration DFPVDFMAX60

Delta Filtration Ultrafiltration module DFPVDFMAX60 is equivalent to Hydranautics HYDRAcap MAX 60 UF membrane, with PVDF membrane of pore size 0.03μm, DFPVDFMAX60 can provide superior retention performance and offer log 4 rejection of Giardia cysts and Cryptosporidium oocysts.

Retrofit For 3M Liqui-Flux

Fluoro-Pure DFPESW10-75 Ultrafiltration module is made with hollow fiber Polyethersulfone(PES) membrane which is naturally hydrophilic and suitable for liquid filtration, it can be used to replace 3M MEMBRANA Liqui-Flux W10 Series UF membrane modules with better cost effectiveness.

Retrofit For XIGA XF40

DelGuard Series Ultrafiltration module is made with hollow fiber 100% Polyethersulfone(PES) membrane which is naturally hydrophilic and suitable for liquid filtration, it can be used to replace Pentair NORIT X-FLOW XIGA / SEAGUARD Series UF membrane modules in diverse applications including pretreatment for seawater SWRO desalination, drinking water treatment, injection water production, boiler feed water production etc.

Retrofit For Koch Targa II 10072-35

Delta Filtration PES Ultrafiltration module DFTGAPES10072 is equivalent to Koch Targa II 10072-35 ultrafiltration cartridge with same dimensions and equivalent performance, with 81㎡ large filtration area, it can be used in large water treatment plants with limited footprint, including mining industry, oil&gas, power plants etc.

Toray HFU-1020AN Membrane Equivalent

Fluoro-Pure DELFIL Ultrafiltration is developed to replace TORAY UF Membrane TORAYFIL series as a more economical replacement solution, 100% compatible with existing UF system, PVDF membrane and PVC housing structure provides good resistance to chlorine and strong acids, which allows for better chemical cleaning to recover membrane flux.

Retrofit For Litree Gemini-U MBR Module

Fluoro-Klean DFHFMBR-GMNU MBR membranes are alternative modules to Litree Gemini-U MBR membrane module with 31㎡ filtration area, this submerged membrane module is specially for sewage treatment process.

3M Liqui-Cel G520 G520R Alternative