Poly String G Big Wound Cartridge Filter
The Poly String G big string wound cartridges are available with polypropylene, cotton material. It is ideal choice for particle removal because of high dirt holding capacity, which offers good protection for downstream membrane systems, it can reduce plant operation cost significantly due to long service life.Certainly,big outside diameter could increase the flow rate.
Features
● Big Area enhances dirt holding capacity
● High contaminant removal efficiency
● Excellent chemical compatibility
● Wide application
● Great flow rate and low pressure drop
● Long service life
Application
● Pre-RO
● Electronic
● Oil injection water
● Chemical solvents
● Drinking water treatment
● Cooling water
Specification
Materials of Construction |
|
Filter Media |
Polypropylene/ Cotton |
End Caps |
Polypropylene |
Core |
Polypropylene/SS304/SS316 |
End Cap |
NA |
O-Rings |
NA |
Dimensions(Nominal) |
|
Nominal Outside Diameter : |
4.5inch/114±1(mm) |
Nominal Inside Diameter |
1.1inch/28mm) |
Length |
10inch,20inch,30inch,40inch, |
Micron Ratings |
1μm,3μm,5μm,10μm,20μm, |
Operating Condition |
|
Maximum Temperature: |
180℉ (82 ℃) |
Maximum Pressure: |
50psi (3.5bar) @ 68 ℉ (20 ℃) |
Recommended change-out pressure: |
35psi (2.4bar) @ 68 ℉ (20 ℃) |
Order Information
Category:
Depth Filter
Keywords:
Roll Membrane | High Flow Filter | PP Pleated Filter
Contact Us
Tel: +86-513-89157856
Email: sales@delta-filtration.com
Product Description
The Poly String G big string wound cartridges are available with polypropylene, cotton material. It is ideal choice for particle removal because of high dirt holding capacity, which offers good protection for downstream membrane systems, it can reduce plant operation cost significantly due to long service life.Certainly,big outside diameter could increase the flow rate.
Features
● Big Area enhances dirt holding capacity
● High contaminant removal efficiency
● Excellent chemical compatibility
● Wide application
● Great flow rate and low pressure drop
● Long service life
Application
● Pre-RO
● Electronic
● Oil injection water
● Chemical solvents
● Drinking water treatment
● Cooling water
Specification
Materials of Construction |
|
Filter Media |
Polypropylene/ Cotton |
End Caps |
Polypropylene |
Core |
Polypropylene/SS304/SS316 |
End Cap |
NA |
O-Rings |
NA |
Dimensions(Nominal) |
|
Nominal Outside Diameter : |
4.5inch/114±1(mm) |
Nominal Inside Diameter |
1.1inch/28mm) |
Length |
10inch,20inch,30inch,40inch, |
Micron Ratings |
1μm,3μm,5μm,10μm,20μm, |
Operating Condition |
|
Maximum Temperature: |
180℉ (82 ℃) |
Maximum Pressure: |
50psi (3.5bar) @ 68 ℉ (20 ℃) |
Recommended change-out pressure: |
35psi (2.4bar) @ 68 ℉ (20 ℃) |
Order Information
Related Products
Send Inquiry