+
  • 1(13).jpg
  • 2(14).jpg
  • 3(10).jpg
  • 4(4).jpg
  • 5(5).jpg
  • 6(3).jpg

Poly Pleat I Absolute Pleated Cartridge Filter

Poly pleat I absolute cartridge filter is constructed with 100% FDA compliant polypropylene filter media and hardware which provide excellent chemical compatibility, thermal welding process ensures minimal extractable and no leakage to downstream filtration system. A broad range of pore sizes from 0.2μm to 100μm are available, multi-layer structure provides high retention rate and dirt holding capacity, making it a optimal solution for pre-filtration of final polishing filters.

Features

  ● Multi membrane layer enhances removal efficiency(99.9%)

  ● Excellent support layer structure increase the dirt holding capacity

  ● Large surface area reduce the total cost

  ● Wide chemical compatibility

  ● Grade design improve the flow rate

  ● Long service life

Application

  ● Pharmaceutical

  ● Electronic

  ● Chemical solvents

  ● Drinking water treatment

  ● Cooling water

  ● Food and beverage

Specification

Materials of Construction

Filter Media

Absolute Polypropylene

End Caps

Polypropylene

Core

 Polypropylene

End Cap

222 Flat/222 Fin/226 Flat/226 Fin/DOE

O-Rings

Silicone/EPDM/NBR

Dimensions(Nominal)

Nominal Outside Diameter :

2.68inch/68±1(mm)

Nominal Inside Diameter 

1.26inch/32(mm)

Length

10inch,20inch,30inch,40inch,
50inch,60inch,70inch

Micron Ratings

0.1μm,0.2μm,0.45μm,1μm,3μm,
5μm,10μm,20μm,30μm,50μm

Operating Condition

Maximum Temperature:

180℉ (82 ℃)

Maximum Pressure:

58psi (4bar) @ 68 ℉ (20 ℃)

Recommended change-out pressure:

35psi (2.4bar) @ 68 ℉ (20 ℃)

Order Information

1

Category:

Pleated Filter

Keywords:

Roll Membrane | High Flow Filter | PP Pleated Filter

Contact Us

Product Description


Poly pleat I absolute cartridge filter is constructed with 100% FDA compliant polypropylene filter media and hardware which provide excellent chemical compatibility, thermal welding process ensures minimal extractable and no leakage to downstream filtration system. A broad range of pore sizes from 0.2μm to 100μm are available, multi-layer structure provides high retention rate and dirt holding capacity, making it a optimal solution for pre-filtration of final polishing filters.

Features

  ● Multi membrane layer enhances removal efficiency(99.9%)

  ● Excellent support layer structure increase the dirt holding capacity

  ● Large surface area reduce the total cost

  ● Wide chemical compatibility

  ● Grade design improve the flow rate

  ● Long service life

Application

  ● Pharmaceutical

  ● Electronic

  ● Chemical solvents

  ● Drinking water treatment

  ● Cooling water

  ● Food and beverage

Specification

Materials of Construction

Filter Media

Absolute Polypropylene

End Caps

Polypropylene

Core

 Polypropylene

End Cap

222 Flat/222 Fin/226 Flat/226 Fin/DOE

O-Rings

Silicone/EPDM/NBR

Dimensions(Nominal)

Nominal Outside Diameter :

2.68inch/68±1(mm)

Nominal Inside Diameter 

1.26inch/32(mm)

Length

10inch,20inch,30inch,40inch,
50inch,60inch,70inch

Micron Ratings

0.1μm,0.2μm,0.45μm,1μm,3μm,
5μm,10μm,20μm,30μm,50μm

Operating Condition

Maximum Temperature:

180℉ (82 ℃)

Maximum Pressure:

58psi (4bar) @ 68 ℉ (20 ℃)

Recommended change-out pressure:

35psi (2.4bar) @ 68 ℉ (20 ℃)

Order Information

1

Related Products


Hyflux Kristal K600B Retrofit


Fluoro-Pure D600ER Series UF filter is developed to replace Hyflux UF Membrane Kristal K600ER model, providing a more economical replacement solution and making sure retrofit module is 100% compatible with existing UF system.

Brackish Water Reverse Osmosis


Delta Filtration brackish water ro membranes are specially developed for brackish water filtration process with TDS range 1000~5000 mg/L, standard size 4inch / 8inch diameter and 40inch length, OEM service is available.

Low Pressure Reverse Osmosis


Delta Pure reverse osmosis low water pressure membrane element is developed for energy saving applications with low operation pressure. It has the characteristics of high flow and excellent rejection performance in salt rejection. It is especially suitable for the preparation of ultra pure water in Pharmaceutical, Electronics and Power industry etc. DFLP8040 has large filtration area of 37m2 with 99.5% stable salt rejection rate.

Sea Water RO


Delta Filtration seawater RO membranes are manufactured under ISO 9001 management system, 100,000 pcs annual production capacity for industrial RO guarantees fast delivery time from Shanghai port.

IP-51XP IP-77XP Alternative


Fluoro-Pure DelPac Series Ultrafiltration module can be used as replacement for Dow IntegraPac membrane IP-51XP, IPD-51XP, IP-77XP and IPD-77XP series with compatible dimensions, PVDF hollow fiber UF membrane applies outside-in flow mode, it allows for wide range of feed water, making it a robust UF module.

Retrofit For Dow UF Membrane


Fluoro-Pure DFP Series Ultrafiltration module is developed to replace Dow Ultrafiltration Membrane SFP 2860 and 2880 with same dimensions and operation principle, compared with PES, PVC and PAN materials, PVDF has much better resistance to chemicals especially sodium hypochlorite-which is main chemical used for membrane cleaning.

IP-51 IP-77 Alternative


Fluoro-Pure DelPac Series Ultrafiltration module is developed to replace Dow IntegraPac membrane IP-51 and IP-77 cross flow ultrafiltration filter with compatible dimensions at much more economical price, compared with PES, PVC and PAN materials, PVDF has better tensile strength and much better resistance to chemicals especially sodium hypochlorite-which is main chemical used for membrane cleaning.

Ultrafiltration DFPVDFMAX60


Delta Filtration Ultrafiltration module DFPVDFMAX60 is equivalent to Hydranautics HYDRAcap MAX 60 UF membrane, with PVDF membrane of pore size 0.03μm, DFPVDFMAX60 can provide superior retention performance and offer log 4 rejection of Giardia cysts and Cryptosporidium oocysts.

Retrofit For 3M Liqui-Flux


Fluoro-Pure DFPESW10-75 Ultrafiltration module is made with hollow fiber Polyethersulfone(PES) membrane which is naturally hydrophilic and suitable for liquid filtration, it can be used to replace 3M MEMBRANA Liqui-Flux W10 Series UF membrane modules with better cost effectiveness.

Fluoro-Pure DELWED PES Module


Fluoro-Pure DELWED Ultrafiltration module is an economical membrane element with hydrophilic PES membrane design and robust hollow fiber structure, as an integrated membrane technology provider, we have strict quality control procedure and internal test to make sure Delta module provides equivalent performance to leading brands. With 0.02μm pore size, DFPES700B-60 can effectively retain particles, bacteria and virus and produce clean water which makes is suitable for drinking water treatment, pre-treatment for reverse osmosis, industrial wastewater treatment etc.

Pentair X-Flow Aquaflex Retrofit


Fluoro-Pure DELFLEX Series Ultrafiltration module is made with hollow fiber Polyethersulfone(PES) membrane which is naturally hydrophilic and suitable for liquid filtration, it can be used to replace Pentair UF membrane or Norit UF Aquaflex Series PES UF membrane modules with better cost effectiveness.

Send Inquiry