Poly Pleat H Cartridge Filter
Poly Pleat H filter cartridge is manufactured with 100% polypropylene, high strength components and thermal welding manufacturing process greatly reduce risk of leakage,0.1μm - 100μm micron rating makes it suitable for pre-filtration and final polishing process, it provides an economical solution for a variety of filtration processes. The filter is constructed of pleated polypropylene filter media with high surface area which allows for high flow rate.
Features
● Multi support layer enhances dirt holding capacity
● Excellent membrane structure increase the contaminant removal efficiency
● PP core provides excellent strength of cartridge filter
● Grade design improve the flow rate
● Long service life
Application
● Pre-RO
● Electronic
● Chemical solvents
● Drinking water treatment
● Cooling water
● Food and beverage
Specification
Materials of Construction |
|
Filter Media |
Polypropylene/Glass Fiber |
End Caps |
Polypropylene |
Core |
Polypropylene |
End Cap |
222 Flat/222 Fin/226 Flat/226 Fin/DOE |
O-Rings |
Silicone/EPDM/Viton/NBR |
Dimensions(Nominal) |
|
Nominal Outside Diameter : |
2.68inch/68±1(mm) |
Nominal Inside Diameter |
1.26inch/32(mm) |
Length |
10inch,20inch,30inch,40inch, |
Micron Ratings |
0.1μm,0.2μm,0.45μm,1μm,3μm, |
Operating Condition |
|
Maximum Temperature: |
180℉ (82 ℃) |
Maximum Pressure: |
58psi (4bar) @ 68 ℉ (20 ℃) |
Recommended change-out pressure: |
35psi (2.4bar) @ 68 ℉ (20 ℃) |
Order Information
Category:
Pleated Filter
Keywords:
Roll Membrane | High Flow Filter | PP Pleated Filter
Contact Us
Tel: +86-513-89157856
Email: sales@delta-filtration.com
Product Description
Poly Pleat H filter cartridge is manufactured with 100% polypropylene, high strength components and thermal welding manufacturing process greatly reduce risk of leakage,0.1μm - 100μm micron rating makes it suitable for pre-filtration and final polishing process, it provides an economical solution for a variety of filtration processes. The filter is constructed of pleated polypropylene filter media with high surface area which allows for high flow rate.
Features
● Multi support layer enhances dirt holding capacity
● Excellent membrane structure increase the contaminant removal efficiency
● PP core provides excellent strength of cartridge filter
● Grade design improve the flow rate
● Long service life
Application
● Pre-RO
● Electronic
● Chemical solvents
● Drinking water treatment
● Cooling water
● Food and beverage
Specification
Materials of Construction |
|
Filter Media |
Polypropylene/Glass Fiber |
End Caps |
Polypropylene |
Core |
Polypropylene |
End Cap |
222 Flat/222 Fin/226 Flat/226 Fin/DOE |
O-Rings |
Silicone/EPDM/Viton/NBR |
Dimensions(Nominal) |
|
Nominal Outside Diameter : |
2.68inch/68±1(mm) |
Nominal Inside Diameter |
1.26inch/32(mm) |
Length |
10inch,20inch,30inch,40inch, |
Micron Ratings |
0.1μm,0.2μm,0.45μm,1μm,3μm, |
Operating Condition |
|
Maximum Temperature: |
180℉ (82 ℃) |
Maximum Pressure: |
58psi (4bar) @ 68 ℉ (20 ℃) |
Recommended change-out pressure: |
35psi (2.4bar) @ 68 ℉ (20 ℃) |
Order Information
Related Products
Send Inquiry