PTFE Filter Cartridge

Poly Pleat PTFE filter cartridge is constructed with 100% FDA compliant PTFE membrane and PP hardware, naturally hydrophobic PTFE makes it suitable for venting and aggressive chemical filtration process. It is thermally bonded and adhesive free. Every filter is pre-flushed and integrity tested before final assembly.

Poly Pleat PTFE pleated filter cartridge meets U.S. FDA requirements for food contact under the applicable regulations in 21 CFR and the test criteria for USP Class VI-121C Plastics, strict quality control process makes sure minimal fibre migration.

Features

　　● FDA CFR 21 material

　　● Wide chemical compatibility

　　● 100% Integrity tested

　　● Hot water and steam sterilization allowed

　　● Replacement model for other vendors

Brand	Series
Pall	Emflon PFR
Millipore	Aervent
3M Cuno	LifeASSURE PFS
Parker	HIGH FLOW TETPOR II Air & Gas
Eaton	LOFMEM T
Suez	Memtrex absolute pleated
Amazon Filters	SUPAPORE TP
Graver Technologies	TefTEC V

Application

　　● Tank venting filter

　　● Chemical solvents

　　● Electronics industry

Materials of Construction
Filter Media	Hydrophobic PTFE
End Caps	Polypropylene
Core	Polypropylene
End Cap	222 Flat/222 Fin/226 Flat/226 Fin/DOE
O-Rings	Silicone/EPDM/Viton/NBR
Dimensions(Nominal)
Nominal Outside Diameter :	2.68inch/68±1(mm)
Nominal Inside Diameter	1.26inch/32（mm）
Micron Ratings	0.1μm,0.2μm,0.45μm,0.65μm, 1.0μm
Filtration Area	0.6m²(10’’)

Operating Condition
Maximum Temperature:	180℉ (82 ℃)
Maximum Pressure:	73psi (5bar) @ 68 ℉ (20 ℃)
Recommended change-out pressure:	35psi (2.4bar) @ 68 ℉ (20 ℃)

Sterilization
Hot Water:	85 ℃ 60min. 100 cycles
Steam In Place:	121 ℃ 30min. 100 cycles
Autoclave:	121 ℃ 30min. 100 cycles

Order Information

For Example: DFPTFE 02 - 40 F S

Series

Rating

Length

End Cap

O-Ring

Inner Core

Delta Filtration

PTFE

01=0.1μm

02=0.2μm

045=0.45μm

065=0.65μm

1=1μm

10=10inch

20=20inch

30=30inch

40=40inch

50=50inch

60=60inch

70=70inch

A=222/Flat

B=222/Fin

C=226/Flat

D=226/Fin

D2=226/Fin with SS316 insert

F=DOE

S=Silicone

E=EPDM

V=Viton

N=NBR

Blank=Polypropylene

S=SS304

L=SS316

Send Inquiry

Contact

Category:

Membrane Filter

Keywords:

Roll Membrane | High Flow Filter | PP Pleated Filter

Tel: +86-513-89157856
Email: sales@delta-filtration.com

Poly Pleat PTFE filter cartridge is constructed with 100% FDA compliant PTFE membrane and PP hardware, naturally hydrophobic PTFE makes it suitable for venting and aggressive chemical filtration process. It is thermally bonded and adhesive free. Every filter is pre-flushed and integrity tested before final assembly.

Product Description

Features

　　● FDA CFR 21 material

　　● Wide chemical compatibility

　　● 100% Integrity tested

　　● Hot water and steam sterilization allowed

　　● Replacement model for other vendors

Brand	Series
Pall	Emflon PFR
Millipore	Aervent
3M Cuno	LifeASSURE PFS
Parker	HIGH FLOW TETPOR II Air & Gas
Eaton	LOFMEM T
Suez	Memtrex absolute pleated
Amazon Filters	SUPAPORE TP
Graver Technologies	TefTEC V

Application

　　● Tank venting filter

　　● Chemical solvents

　　● Electronics industry

Materials of Construction
Filter Media	Hydrophobic PTFE
End Caps	Polypropylene
Core	Polypropylene
End Cap	222 Flat/222 Fin/226 Flat/226 Fin/DOE
O-Rings	Silicone/EPDM/Viton/NBR
Dimensions(Nominal)
Nominal Outside Diameter :	2.68inch/68±1(mm)
Nominal Inside Diameter	1.26inch/32（mm）
Micron Ratings	0.1μm,0.2μm,0.45μm,0.65μm, 1.0μm
Filtration Area	0.6m²(10’’)

Operating Condition
Maximum Temperature:	180℉ (82 ℃)
Maximum Pressure:	73psi (5bar) @ 68 ℉ (20 ℃)
Recommended change-out pressure:	35psi (2.4bar) @ 68 ℉ (20 ℃)

Sterilization
Hot Water:	85 ℃ 60min. 100 cycles
Steam In Place:	121 ℃ 30min. 100 cycles
Autoclave:	121 ℃ 30min. 100 cycles

Order Information

For Example: DFPTFE 02 - 40 F S

Series

Rating

Length

End Cap

O-Ring

Inner Core

Delta Filtration

PTFE

01=0.1μm

02=0.2μm

045=0.45μm

065=0.65μm

1=1μm

10=10inch

20=20inch

30=30inch

40=40inch

50=50inch

60=60inch

70=70inch

A=222/Flat

B=222/Fin

C=226/Flat

D=226/Fin

D2=226/Fin with SS316 insert

F=DOE

S=Silicone

E=EPDM

V=Viton

N=NBR

Blank=Polypropylene

S=SS304

L=SS316

Related Products

AQUAFLEX HP PVC 0.8mm

8" AQUAFLEX HP PVC 0.8mm UFCLE Ultrafiltration module is used for production of process and potable water as well as WWTP effluent, Delta Filtration DFPES9055 model can be used to replace Pentair AQUAFLEX HP PVC 0.8mm membrane with compatible dimensions which means no piping modification is required.

Retrofit For XIGA XF40

DelGuard Series Ultrafiltration module is made with hollow fiber 100% Polyethersulfone(PES) membrane which is naturally hydrophilic and suitable for liquid filtration, it can be used to replace Pentair NORIT X-FLOW XIGA / SEAGUARD Series UF membrane modules in diverse applications including pretreatment for seawater SWRO desalination, drinking water treatment, injection water production, boiler feed water production etc.

Hyflux Kristal K600B Retrofit

Fluoro-Pure D600ER Series UF filter is developed to replace Hyflux UF Membrane Kristal K600ER model, providing a more economical replacement solution and making sure retrofit module is 100% compatible with existing UF system.

IP-51XP IP-77XP Alternative

Fluoro-Pure DelPac Series Ultrafiltration module can be used as replacement for Dow IntegraPac membrane IP-51XP, IPD-51XP, IP-77XP and IPD-77XP series with compatible dimensions, PVDF hollow fiber UF membrane applies outside-in flow mode, it allows for wide range of feed water, making it a robust UF module.

IP-51 IP-77 Alternative

Fluoro-Pure DelPac Series Ultrafiltration module is developed to replace Dow IntegraPac membrane IP-51 and IP-77 cross flow ultrafiltration filter with compatible dimensions at much more economical price, compared with PES, PVC and PAN materials, PVDF has better tensile strength and much better resistance to chemicals especially sodium hypochlorite-which is main chemical used for membrane cleaning.

Ultrafiltration DFPVDFMAX60

Delta Filtration Ultrafiltration module DFPVDFMAX60 is equivalent to Hydranautics HYDRAcap MAX 60 UF membrane, with PVDF membrane of pore size 0.03μm, DFPVDFMAX60 can provide superior retention performance and offer log 4 rejection of Giardia cysts and Cryptosporidium oocysts.

Retrofit For 3M Liqui-Flux

Fluoro-Pure DFPESW10-75 Ultrafiltration module is made with hollow fiber Polyethersulfone(PES) membrane which is naturally hydrophilic and suitable for liquid filtration, it can be used to replace 3M MEMBRANA Liqui-Flux W10 Series UF membrane modules with better cost effectiveness.

DFPES10K9060-Pentair HFS 60 Retrofit

Fluoro-Pure DELFLEX Series DFPES10K9060 Ultrafiltration module is made with hollow fiber Polyethersulfone(PES) membrane with small pore size of 10,000 Dalton Mollecular Weight Cut-Off which can remove colloidal silica from surface water, it can be used to replace Pentair X-Flow HFS 60 tight ultrafiltration membrane with better cost effectiveness.

DELWED 500D MBR Module

Fluoro-Klean DELWED MBR membranes are direct replacement for 500D 340, 500D 370 and 500D 440 membrane modules, with large filtration area and flow capacity, it can be used for large project to save footprint significantly, MBR cassette is also available upon customized design requirement, high cost effectiveness makes DELWED series a good option for new and replacement projects.

Retrofit VK-0094 Dizzer 5000plus

Fluoro-Pure DFPES700B-50 Ultrafiltration module is an economical replacement for Inge dizzer XL 5000plus(p/n: VK-0094), as an integrated membrane technology provider, we have strict quality control procedure and internal test to make sure Delta module provides equivalent performance to Inge brand.

Retrofit For 3M Liqui-Cel EXF-14x28 X50 X40

Retrofit For DuPont IntegraTec XP 51

Fluoro-Pure DFP Series DFUFPVDF9051 is economical replacement for DuPont IntegraTec XP 51(previous Dow SFP-2860) with same dimensions, hydrophilic PVDF membrane can provide stable permeate flow, outside-in flow mode has high tolerance for feed water quality. Ultrafiltration membrane 0.03μm pore size can effectively remove suspended solids and bacteria, thus producing high quality permeate with low SDI and turbidity.