Hyflux KT600 Retrofit

Fluoro-Pure D600ET Series Ultrafiltration module is an economical replacement for Hyflux UF membrane Kristal K600ETI - 55 and K600ETI - 32 model, PVDF hollow fiber membrane is resistant to higher chlorine concentration up to 2,000 mg/L. Modified PVDF membrane can provide an excellent flow rate with low pressure drop. It allows for cross-flow and dead-end filtration, 120,000 Dalton Molecular weight cut-off contributes to good rejection to bacteria and viruses as well as offering a high flow rate.

Fluoro-Pure D600ET Series is available with OEM service, with large production capacity, we guarantee short delivery time, and fast shipping from Shanghai port.

Features

　　● PVDF membrane with better chemical performance than PES

　　● Direct replacement for Hyflux Kristal membrane K600ET

　　● Operation same as the Hyflux module

　　● High flux with low pressure drop

● Good rejection to bacteria and virus

One of the standout features of our Fluoro-Pure D600ET Series is its direct compatibility with the Hyflux Kristal membrane K600ET. You can seamlessly integrate our module into your existing system, without any operational changes. Experience the same reliable performance while taking advantage of the improved chemical resistance and enhanced filtration capabilities offered by our PVDF membrane.

To further meet your specific needs, our Fluoro-Pure D600ET Series is available with OEM service. We understand that every filtration project is unique, and our team is ready to customize our modules to meet your exact requirements. With our large production capacity, we ensure short delivery times, allowing you to stay on schedule. Plus, located near Shanghai port, we offer fast shipping options for your convenience.

Choose the Fluoro-Pure D600ET Series Ultrafiltration module for its superior chemical performance, high flux, and low pressure drop. Benefit from its exceptional rejection of bacteria and viruses, ensuring the highest level of filtration efficiency. Contact us today to discover how our module can revolutionize your filtration processes and provide long-term value. Trust in our expertise as we help you achieve optimal filtration results while keeping costs in check.

Typical Applications


Electroplating wastewater treatment	Food processing wastewater treatment

Pharmaceutical wastewater treatment	Seawater desalination

Model		DFPVDF600ET
Specification	Membrane material	PVDF
	Housing material	UPVC
	MWCO(Dalton)	120,000
	Inner diameter(mm)	0.7
	Outer diameter(mm)	1.3
	Membrane area(m2)	60
	Overall length(mm)	2,340
	Module diameter(mm)	344
	Feed/Filtrate port	1.5 inch NPT
	Rejection port	1.5 inch NPT
	Potting material	Epoxy resin
	Bacteria rejection	>99.9999%
	Virus rejection	>99.99%
	Tensile force(N)	>3
Operation parameter	Max.chlorine concentration(ppm)	2000
	pH range	2 - 11
	Max backwash pressure(Mpa)	0.2
	Max feed pressure(Mpa)	0.25
	Max backwash flow(L/H)	3500
	Air scour rate(Nm3/h)	4.0 - 7.0
	Design flux(LMH)	50 - 120

Send Inquiry

Contact

Category:

Ultrafiltration Membrane

Keywords:

Roll Membrane | High Flow Filter | PP Pleated Filter

Tel: +86-513-89157856
Email: sales@delta-filtration.com

Fluoro-Pure D600ET Series Ultrafiltration module is an economical replacement for Hyflux UF membrane Kristal K600ETI - 55 and K600ETI - 32 model, PVDF hollow fiber membrane is resistant to higher chlorine concentration up to 2,000 mg/L. Modified PVDF membrane can provide excellent flow rate with low pressure drop. It allows for cross-flow and dead-end filtration, 120,000 Dalton Molecular weight cut-off contributes to good rejection to bacteria and virus as well as offering high flow rate.

Product Description

Fluoro-Pure D600ET Series is available with OEM service, with large production capacity, we guarantee short delivery time, and fast shipping from Shanghai port.

Features

　　● PVDF membrane with better chemical performance than PES

　　● Direct replacement for Hyflux Kristal membrane K600ET

　　● Operation same as the Hyflux module

　　● High flux with low pressure drop

● Good rejection to bacteria and virus

Typical Applications


Electroplating wastewater treatment	Food processing wastewater treatment

Pharmaceutical wastewater treatment	Seawater desalination

Model		DFPVDF600ET
Specification	Membrane material	PVDF
	Housing material	UPVC
	MWCO(Dalton)	120,000
	Inner diameter(mm)	0.7
	Outer diameter(mm)	1.3
	Membrane area(m2)	60
	Overall length(mm)	2,340
	Module diameter(mm)	344
	Feed/Filtrate port	1.5 inch NPT
	Rejection port	1.5 inch NPT
	Potting material	Epoxy resin
	Bacteria rejection	>99.9999%
	Virus rejection	>99.99%
	Tensile force(N)	>3
Operation parameter	Max.chlorine concentration(ppm)	2000
	pH range	2 - 11
	Max backwash pressure(Mpa)	0.2
	Max feed pressure(Mpa)	0.25
	Max backwash flow(L/H)	3500
	Air scour rate(Nm3/h)	4.0 - 7.0
	Design flux(LMH)	50 - 120

Related Products

Brackish Water Reverse Osmosis

Delta Filtration brackish water ro membranes are specially developed for brackish water filtration process with TDS range 1000~5000 mg/L, standard size 4inch / 8inch diameter and 40inch length, OEM service is available.

Low Pressure Reverse Osmosis

Delta Pure reverse osmosis low water pressure membrane element is developed for energy saving applications with low operation pressure. It has the characteristics of high flow and excellent rejection performance in salt rejection. It is especially suitable for the preparation of ultra pure water in Pharmaceutical, Electronics and Power industry etc. DFLP8040 has large filtration area of 37m2 with 99.5% stable salt rejection rate.

Sea Water RO

Delta Filtration seawater RO membranes are manufactured under ISO 9001 management system, 100,000 pcs annual production capacity for industrial RO guarantees fast delivery time from Shanghai port.

Dow IP-51XP IP-77XP Alternative

Fluoro-Pure DelPac Series Ultrafiltration module can be used as replacement for Dow IntegraPac membrane IP-51XP, IPD-51XP, IP-77XP and IPD-77XP series with compatible dimensions, PVDF hollow fiber UF membrane applies outside-in flow mode, it allows for wide range of feed water, making it a robust UF module.

Dow UF Membrane Retrofit

Fluoro-Pure DFP Series Ultrafiltration module is developed to replace Dow Ultrafiltration Membrane SFP 2860 and 2880 with same dimensions and operation principle, compared with PES, PVC and PAN materials, PVDF has much better resistance to chemicals especially sodium hypochlorite-which is main chemical used for membrane cleaning.

Dow IP-51 IP-77 Alternative

Fluoro-Pure DelPac Series Ultrafiltration module is developed to replace Dow IntegraPac membrane IP-51 and IP-77 cross flow ultrafiltration filter with compatible dimensions at much more economical price, compared with PES, PVC and PAN materials, PVDF has better tensile strength and much better resistance to chemicals especially sodium hypochlorite-which is main chemical used for membrane cleaning.

Ultrafiltration DFPVDFMAX60

Delta Filtration Ultrafiltration module DFPVDFMAX60 is equivalent to Hydranautics HYDRAcap MAX 60 UF membrane, with PVDF membrane of pore size 0.03μm, DFPVDFMAX60 can provide superior retention performance and offer log 4 rejection of Giardia cysts and Cryptosporidium oocysts.

Retrofit For 3M Liqui-Flux

Fluoro-Pure DFPESW10-75 Ultrafiltration module is made with hollow fiber Polyethersulfone(PES) membrane which is naturally hydrophilic and suitable for liquid filtration, it can be used to replace 3M MEMBRANA Liqui-Flux W10 Series UF membrane modules with better cost effectiveness.

Fluoro-Pure DELWED PES Module

Fluoro-Pure DELWED Ultrafiltration module is an economical membrane element with hydrophilic PES membrane design and robust hollow fiber structure, as an integrated membrane technology provider, we have strict quality control procedure and internal test to make sure Delta module provides equivalent performance to leading brands. With 0.02μm pore size, DFPES700B-60 can effectively retain particles, bacteria and virus and produce clean water which makes is suitable for drinking water treatment, pre-treatment for reverse osmosis, industrial wastewater treatment etc.

Retrofit For Koch Targa II Cartridge

Pentair X-Flow Aquaflex Retrofit

Fluoro-Pure DELFLEX Series Ultrafiltration module is made with hollow fiber Polyethersulfone(PES) membrane which is naturally hydrophilic and suitable for liquid filtration, it can be used to replace Pentair UF membrane or Norit UF Aquaflex Series PES UF membrane modules with better cost effectiveness.

Inge VK-0094 Dizzer 5000plus Retrofit

Fluoro-Pure DFPES700B-50 Ultrafiltration module is an economical replacement for Inge dizzer XL 5000plus(p/n: VK-0094), as an integrated membrane technology provider, we have strict quality control procedure and internal test to make sure Delta module provides equivalent performance to Inge brand.