+
  • Pentair X-Flow Retrofit111.jpg

Pentair X-Flow Aquaflex HP 55 Retrofit

Fluoro-Free DELFLEX Series Ultrafiltration module DFPES9055 model can work as economical replacement for Pentair Norit Aquaflex HP 55 with better cost effectiveness, no modification is required because of its compatible dimensions, DFPES9055 can well fit into original membrane systems.
Hollow fiber UF module allows for larger loading capacity with same space, 0.02μm pore size contributes to good rejection to bacteria and virus, PES material has very good hydrophilic feature and less membrane fouling. 

Features

    ● 0.02μm pore size produces high quality filtrate

    ● Direct replacement for Pentair Ultrafiltration membrane

    ● Inside-out flow, no air scour needed

    ● Excellent chemical resistance

    ● Typical permeate SDI<3, turbidity <0.1NTU

Application

    ● Municipal wastewater treatment

    ● Palm oil wastewater treatment

    ● Industrial wastewater treatment

    ● Pharmaceutical wastewater treatment

    ● Food&Beverage wastewater treatment

 

Model DFPES9040 DFPES9055 DFPES9064
Specification Membrane material PES PES PES
Housing material UPVC UPVC UPVC
Pore size(μm) 0.02 0.02 0.02
Inner diameter(mm) 0.8 0.8 0.8
Outer diameter(mm) 1.5 1.5 1.5
Membrane area(m2) 40 55 64
Installation length(mm) 1901-1905 1901-1905 1901-1905
Module diameter(mm) 220 220 220
Connection size
(Feed/Permeate/Concentrate)
DN65(73mm) DN65(73mm) DN65(73mm)
Potting material Epoxy resin Epoxy resin Epoxy resin
Flow direction Inside-out Inside-out Inside-out
Operation parameter Max chlorine concentration(ppm) 500 500 500
pH range 2 - 13 2 - 13 2 - 13
Working temperature(℃) 5 - 40 5 - 40 5 - 40
Max feed pressure(Mpa) 0.3 0.3 0.3
Max backwash pressure(Mpa) 0.2 0.2 0.2
Max trans-membrane pressure (Mpa) 0.2 0.2 0.2
Max backwash flow(L/㎡/h) 250~300 250~300 250~300

 

FAQ

Q: How is the DELFLEX PES module performance compared with Pentair X-Flow?

A: It is equivalent, Fluoro-Pure DELFLEX is made with our own mould to make sure it can replace Pentair module, super hyhydrophilic feature can provide high flux.

 

Q: Where is your factory located? Can I visit your factory?

A: Our factory is located in Nantong, just two hours driving from Shanghai airport, you are welcome to visit us to discuss cooperation face to face.

 

Q: Do I need to run backwash for the inside-out PES membrane?

A: Backwash is still needed to flush out contaminants and recover membrane flux, air scour is not necessary.

 

Q: What membrane should I choose for drinking water filtration, PES or PVDF?

A: PES is naturally hydrophilic and suitable for drinking water filtration, fine pore size could effectively retain contaminants such as bacteria and virus.

 

Q: Besides Pentair Nortit UF replacement, do you have other UF series?

A: Yes, we are making Ultrafiltration replacement for below brands:

Dow UF SFP-2660, SFP-2860, SFP-2880, SFP-2860XP, SFP-2880XP

DuPont IntegraPac IP-55 and IP-77

Hydranautics HYDRAcap MAX 40/60/80

3M Liqui-Flux Membrane Module

Toray TORAYFIL HFU-2020N

SUEZ ZeeWeed Module

Hyflux Kristal Membrane

PALL ARIA Module

Category:

Pentair Equivalent

Keywords:

Roll Membrane | High Flow Filter | PP Pleated Filter

Contact Us

Fluoro-Free DELFLEX Series Ultrafiltration module DFPES9055 model can work as economical replacement for Pentair Norit Aquaflex HP 55 with better cost effectiveness, no modification is required because of its compatible dimensions, DFPES9055 can well fit into original membrane systems. Hollow fiber UF module allows for larger loading capacity with same space, 0.02μm pore size contributes to good rejection to bacteria and virus, PES material has very good hydrophilic feature and less membrane fouling. 

Product Description


Fluoro-Free DELFLEX Series Ultrafiltration module DFPES9055 model can work as economical replacement for Pentair Norit Aquaflex HP 55 with better cost effectiveness, no modification is required because of its compatible dimensions, DFPES9055 can well fit into original membrane systems.
Hollow fiber UF module allows for larger loading capacity with same space, 0.02μm pore size contributes to good rejection to bacteria and virus, PES material has very good hydrophilic feature and less membrane fouling. 

Features

    ● 0.02μm pore size produces high quality filtrate

    ● Direct replacement for Pentair Ultrafiltration membrane

    ● Inside-out flow, no air scour needed

    ● Excellent chemical resistance

    ● Typical permeate SDI<3, turbidity <0.1NTU

Application

    ● Municipal wastewater treatment

    ● Palm oil wastewater treatment

    ● Industrial wastewater treatment

    ● Pharmaceutical wastewater treatment

    ● Food&Beverage wastewater treatment

 

Model DFPES9040 DFPES9055 DFPES9064
Specification Membrane material PES PES PES
Housing material UPVC UPVC UPVC
Pore size(μm) 0.02 0.02 0.02
Inner diameter(mm) 0.8 0.8 0.8
Outer diameter(mm) 1.5 1.5 1.5
Membrane area(m2) 40 55 64
Installation length(mm) 1901-1905 1901-1905 1901-1905
Module diameter(mm) 220 220 220
Connection size
(Feed/Permeate/Concentrate)
DN65(73mm) DN65(73mm) DN65(73mm)
Potting material Epoxy resin Epoxy resin Epoxy resin
Flow direction Inside-out Inside-out Inside-out
Operation parameter Max chlorine concentration(ppm) 500 500 500
pH range 2 - 13 2 - 13 2 - 13
Working temperature(℃) 5 - 40 5 - 40 5 - 40
Max feed pressure(Mpa) 0.3 0.3 0.3
Max backwash pressure(Mpa) 0.2 0.2 0.2
Max trans-membrane pressure (Mpa) 0.2 0.2 0.2
Max backwash flow(L/㎡/h) 250~300 250~300 250~300

 

FAQ

Q: How is the DELFLEX PES module performance compared with Pentair X-Flow?

A: It is equivalent, Fluoro-Pure DELFLEX is made with our own mould to make sure it can replace Pentair module, super hyhydrophilic feature can provide high flux.

 

Q: Where is your factory located? Can I visit your factory?

A: Our factory is located in Nantong, just two hours driving from Shanghai airport, you are welcome to visit us to discuss cooperation face to face.

 

Q: Do I need to run backwash for the inside-out PES membrane?

A: Backwash is still needed to flush out contaminants and recover membrane flux, air scour is not necessary.

 

Q: What membrane should I choose for drinking water filtration, PES or PVDF?

A: PES is naturally hydrophilic and suitable for drinking water filtration, fine pore size could effectively retain contaminants such as bacteria and virus.

 

Q: Besides Pentair Nortit UF replacement, do you have other UF series?

A: Yes, we are making Ultrafiltration replacement for below brands:

Dow UF SFP-2660, SFP-2860, SFP-2880, SFP-2860XP, SFP-2880XP

DuPont IntegraPac IP-55 and IP-77

Hydranautics HYDRAcap MAX 40/60/80

3M Liqui-Flux Membrane Module

Toray TORAYFIL HFU-2020N

SUEZ ZeeWeed Module

Hyflux Kristal Membrane

PALL ARIA Module

Related Products


Flat Sheet MBR Membrane


Fluoro-Klean FSMBR Membrane is developed with flat sheet membrane structure which provides better anti-fouling performance than hollow fiber membrane, PVDF membrane materials can resist higher temperature and concentration of cleaning chemicals as well as higher MLSS(up to 20,000 mg/L), flat plat structure contributes to less membrane fouling compared with hollow fiber membrane, this also allows CIP done in-situ and membrane panel replacement done in a few minutes. Compared with PVC flat sheet membrane, PVDF MBR is suitable for critical wastewater such as landfill leachate, refinery wastewater and palm oil mill effluent treatment, it provides longer service life too. DFFSMBRPVDF080 model can also work as economical replacement for Kubota 510 MBR model with dimensions 490x1020mm, thus it can fit into Kubuta membrane cassette, manifolds and transparent tubes can also be provided together with membrane modules.

ZeeWeed 500D Retrofit


Fluoro-Klean DELWED MBR membranes are direct replacement for Veolia Suez GE Zeeweed 500D 340, 500D 370 and 500D 440 membrane modules, with large filtration area and flow capacity, it can be used for large project to save footprint significantly, MBR cassette is also available upon customized design requirement, high cost effectiveness makes DELWED series a good option for new and replacement projects. The submerged membrane bioreactor is made with hollow fiber PVDF membrane, reinforced structure makes it suitable for municipal and industrial wastewater treatment without fiber breakage, 0.04μm pore size can effectively retain contaminants such as particles, colloides and bacteria as well as offering high flow rate.

Asahi KASEI Pall Microza UNA-620AB Retrofit


Fluoro-Pure Series Ultrafiltration module is developed to replace Asahi KASEI Pall Microza hollow fiber module UNA-620A UNA-620AB with same dimensions and operation principle, available membrane areas are 50㎡ and 65㎡ -sames as Pall or Asahi Kasei Microza module, it allows for cross-flow and dead-end filtration, 0.1μm pore size contributes to good rejection to contaminants as well as offering high flow rate.

Dow SFP-2880 2880XP Alternative


Fluoro-Pure DFP Series Ultrafiltration module is developed to replace Dow Ultrafiltration Membrane SFP 2880 with same dimensions and operation principle, compared with PES, PVC and PAN materials, PVDF has much better resistance to chemicals especially sodium hypochlorite-which is main chemical used for membrane cleaning.

Pentair Aquaflex 64 Retrofit


Fluoro-Free DELFLEX Series Ultrafiltration module DFPES9055 model can work as economical replacement for Pentair Norit Aquaflex HP 55 with better cost effectiveness, no modification is required because of its compatible dimensions, DFPES9055 can well fit into original membrane systems. Hollow fiber UF module allows for larger loading capacity with same space, 0.02μm pore size contributes to good rejection to bacteria and virus, PES material has very good hydrophilic feature and less membrane fouling. 

Hyflux Kristal K600B Retrofit


Fluoro-Pure D600ER Series UF filter is developed to replace Hyflux UF Membrane Kristal K600ER model, providing a more economical replacement solution and making sure retrofit module is 100% compatible with existing UF system.

IP-51XP IP-77XP Alternative


Fluoro-Pure DelPac Series Ultrafiltration module can be used as replacement for Dow IntegraPac membrane IP-51XP, IPD-51XP, IP-77XP and IPD-77XP series with compatible dimensions, PVDF hollow fiber UF membrane applies outside-in flow mode, it allows for wide range of feed water, making it a robust UF module.

Cross Flow Membrane Filtration


DelTube Series Ultrafiltration membrane can be used as economical replacement for KOCH SUPER-COR 3010-HFM-180 and 3010-HFM-513 Ultrafiltration Modules, it is made by tubular design, tubular membranes are particularly suited to liquid with high viscosity or suspended solids, because their wide flow paths make them highly resistant to clogging. Cross-flow filtration can reduce cleaning times and downtime, so as to maintain a high flow rate.

Retrofit For ZW700B-8060/UF10/7B/X/0,8/40


DelGuard Series Ultrafiltration module is made with hydrophilic Polyethersulfone(PES) membrane with size 200x1527.5mm as economical replacement for Veolia Suez Zeeweed ZeeWeed ZW700B-8060/UF/10/7B/X/0,8/40 horizontal UF membrane modules, hydraulic membrane diameter is 0.8mm, with inside-out flow mode, it can be installed horizontally into membrane pressure vessel, thus saving footprint and land space.

Retrofit For Veolia ZW500D 600N Strength


Fluoro-Klean DELWED MBR membranes are direct replacement for Veolia ZW500D 340, ZW500D 370 and ZW500D 440 membrane modules with excellent 600N tensile strength, which is same as original membrane modules and there is no fiber breakage issue, 48M 52M MBR cassette is also available with stainless steel 316 material, each cassette can be equipped with 48, 50 and 52 modules, pulsed aeration technology contributes to less energy consumption and plant cost.

Ultrafiltration DFPVDFMAX60


Delta Filtration Ultrafiltration module DFPVDFMAX60 is equivalent to Hydranautics HYDRAcap MAX 60 UF membrane, with PVDF membrane of pore size 0.03μm, DFPVDFMAX60 can provide superior retention performance and offer log 4 rejection of Giardia cysts and Cryptosporidium oocysts.

Send Inquiry