Fluoro-Pure DELWED PVDF Module
Fluoro-Pure DELWED Series Ultrafiltration module is made with hollow fiber PVDF membrane material, as an integrated membrane technology provider, we have strict quality control procedure and internal test to make sure DELWED series provides excellent filtration performance without leakage. With 0.02μm pore size, Fluoro-Pure DELWED Series can effectively retain particles, bacteria and virus and produce clean water which makes is suitable for drinking water treatment, pre-treatment for reverse osmosis, industrial wastewater treatment etc. Fluoro-Pure DELWED Series is integrity tested and 100% passed our quality control standard.
Features
● PVDF membrane with high mechanical strength
● Operation same as original brand when for replacement
● 0.02μm can effective retain bacteria, virus
● Outside-in flow allows for wide range of feed water quality
Comparison between Ultrafiltration and conventional technology
|
Conventional system |
Ultrafiltration |
Footprint |
Large |
At least 50% smaller |
Permeate water quality |
Good |
Excellent |
Chemical consumption |
High |
Low |
Operation cost |
High |
Low |
Life span |
Short |
Long |
Typical Applications:
Winemaking wastewater treatment | Metal processing wastewater treatment |
Power plant water treatment |
Pulp and paper water treatment |
Model |
DFPVDF1500 |
|
Specification |
Membrane material |
PVDF |
Housing material |
UPVC |
|
Pore size(μm) |
0.02 |
|
Inner diameter(mm) |
0.7 |
|
Outer diameter(mm) |
1.3 |
|
Membrane area(m2) |
55 |
|
Overall length(mm) |
1,920 |
|
Module diameter(mm) |
180 |
|
Feed/Filtrate port |
DN50 |
|
Rejection port |
DN40 |
|
Potting material |
Epoxy resin |
|
Operation parameter |
Max.chlorine concentration(ppm) |
2000 |
pH range |
2 - 12 |
|
Max backwash pressure(Mpa) |
0.2 |
|
Max feed pressure(Mpa) |
0.3 |
|
Max backwash flow(L/H) |
5500 |
|
Air scour rate(Nm3/h) |
5.0 - 7.0 |
|
Design flux(LMH) |
50 - 120 |
Category:
Ultrafiltration Membrane
Keywords:
Roll Membrane | High Flow Filter | PP Pleated Filter
Contact Us
Tel: +86-513-89157856
Email: sales@delta-filtration.com
Product Description
Fluoro-Pure DELWED Series Ultrafiltration module is made with hollow fiber PVDF membrane material, as an integrated membrane technology provider, we have strict quality control procedure and internal test to make sure DELWED series provides excellent filtration performance without leakage. With 0.02μm pore size, Fluoro-Pure DELWED Series can effectively retain particles, bacteria and virus and produce clean water which makes is suitable for drinking water treatment, pre-treatment for reverse osmosis, industrial wastewater treatment etc. Fluoro-Pure DELWED Series is integrity tested and 100% passed our quality control standard.
Features
● PVDF membrane with high mechanical strength
● Operation same as original brand when for replacement
● 0.02μm can effective retain bacteria, virus
● Outside-in flow allows for wide range of feed water quality
Comparison between Ultrafiltration and conventional technology
|
Conventional system |
Ultrafiltration |
Footprint |
Large |
At least 50% smaller |
Permeate water quality |
Good |
Excellent |
Chemical consumption |
High |
Low |
Operation cost |
High |
Low |
Life span |
Short |
Long |
Typical Applications:
Winemaking wastewater treatment | Metal processing wastewater treatment |
Power plant water treatment |
Pulp and paper water treatment |
Model |
DFPVDF1500 |
|
Specification |
Membrane material |
PVDF |
Housing material |
UPVC |
|
Pore size(μm) |
0.02 |
|
Inner diameter(mm) |
0.7 |
|
Outer diameter(mm) |
1.3 |
|
Membrane area(m2) |
55 |
|
Overall length(mm) |
1,920 |
|
Module diameter(mm) |
180 |
|
Feed/Filtrate port |
DN50 |
|
Rejection port |
DN40 |
|
Potting material |
Epoxy resin |
|
Operation parameter |
Max.chlorine concentration(ppm) |
2000 |
pH range |
2 - 12 |
|
Max backwash pressure(Mpa) |
0.2 |
|
Max feed pressure(Mpa) |
0.3 |
|
Max backwash flow(L/H) |
5500 |
|
Air scour rate(Nm3/h) |
5.0 - 7.0 |
|
Design flux(LMH) |
50 - 120 |
Related Products
Send Inquiry