Retrofit For STERAPORE MBR

Fluoro-Klean M15 M25 and M40 MBR membranes are developed as alternative modules for Mitsubishi MBR membrane module STERAPORE 5000(50E0015SA), STERAPORE 55(50E0025SA) and STERAPORE 5600(50E0040SA), it can fit well into Mitsubishi MBR cassette, providing an economical replacement solution with high performance and long lifespan.

The Mitsubishi MBR membrane replacement is made with reinforced hollow fiber PVDF membrane, which makes it suitable for critical wastewater treatment without fiber breakage, 0.05μm pore size can effectively reject contaminants such as particles, colloides and bacteria, up to 40㎡ high packing capacity ensures large surface area and flow capacity per element as well as consuming less footprint.

Features

● 100% replacement for Mitsubishi MBR membrane elements

● Reinforced PVDF to avoid fiber breakage

● Anti-fouling with long service life

● up to 40m2 membrane area to enhance capacity

● Quick installation and fast replacement

Application

● Municipal wastewater treatment

● Grey water reuse

● Industrial effluent treatment

● Pharmaceutical wastewater treatment

● Existing wastewater plant capacity expansion

Model		DFHFM15	DFHFM25	DFHFM40
Specification	Membrane material	Reinforced PVDF	Reinforced PVDF	Reinforced PVDF
	Nominal pore size(μm)	0.05	0.05	0.05
	Membrane area(m2)	15	25	40
	Sealing material	Polyurethane resin	Polyurethane resin	Polyurethane resin
	Water collecting header	ABS	ABS	ABS
	Shaft	Stainless steel	Stainless steel	Stainless steel
	Element dimenions(HWL)	3012501300 mm	3012502000 mm	3012502000 mm
Operation parameter	Design flux(LMH)	10~35	10~35	10~35
	Max chlorine concentration(ppm)	5,000	5,000	5,000
	pH range	2~11	2~11	2~11
	Max feed pressure(Mpa)	-0.055	-0.055	-0.055
	Filtration mode	Negative suction	Negative suction	Negative suction

Send Inquiry

Contact

Category:

Mitsubishi Equivalent

Keywords:

Roll Membrane | High Flow Filter | PP Pleated Filter

Tel: +86-513-89157856
Email: sales@delta-filtration.com

Fluoro-Klean M15 M25 and M40 MBR membranes are developed as alternative modules for Mitsubishi MBR membrane module STERAPORE 5000(50E0015SA), STERAPORE 55(50E0025SA) and STERAPORE 5600(50E0040SA), it can fit well into Mitsubishi MBR cassette, providing an economical replacement solution with high performance and long lifespan.

Product Description

Features

● 100% replacement for Mitsubishi MBR membrane elements

● Reinforced PVDF to avoid fiber breakage

● Anti-fouling with long service life

● up to 40m2 membrane area to enhance capacity

● Quick installation and fast replacement

Application

● Municipal wastewater treatment

● Grey water reuse

● Industrial effluent treatment

● Pharmaceutical wastewater treatment

● Existing wastewater plant capacity expansion

Model		DFHFM15	DFHFM25	DFHFM40
Specification	Membrane material	Reinforced PVDF	Reinforced PVDF	Reinforced PVDF
	Nominal pore size(μm)	0.05	0.05	0.05
	Membrane area(m2)	15	25	40
	Sealing material	Polyurethane resin	Polyurethane resin	Polyurethane resin
	Water collecting header	ABS	ABS	ABS
	Shaft	Stainless steel	Stainless steel	Stainless steel
	Element dimenions(HWL)	3012501300 mm	3012502000 mm	3012502000 mm
Operation parameter	Design flux(LMH)	10~35	10~35	10~35
	Max chlorine concentration(ppm)	5,000	5,000	5,000
	pH range	2~11	2~11	2~11
	Max feed pressure(Mpa)	-0.055	-0.055	-0.055
	Filtration mode	Negative suction	Negative suction	Negative suction

Related Products

Flat Sheet MBR Membrane

Fluoro-Klean FSMBR Membrane is developed with flat sheet membrane structure which provides better anti-fouling performance than hollow fiber membrane, PVDF membrane materials can resist higher temperature and concentration of cleaning chemicals as well as higher MLSS(up to 20,000 mg/L), flat plat structure contributes to less membrane fouling compared with hollow fiber membrane, this also allows CIP done in-situ and membrane panel replacement done in a few minutes. Compared with PVC flat sheet membrane, PVDF MBR is suitable for critical wastewater such as landfill leachate, refinery wastewater and palm oil mill effluent treatment, it provides longer service life too. DFFSMBRPVDF080 model can also work as economical replacement for Kubota 510 MBR model with dimensions 490x1020mm, thus it can fit into Kubuta membrane cassette, manifolds and transparent tubes can also be provided together with membrane modules.

ZeeWeed 500D Retrofit

Fluoro-Klean DELWED MBR membranes are direct replacement for Veolia Suez GE Zeeweed 500D 340, 500D 370 and 500D 440 membrane modules, with large filtration area and flow capacity, it can be used for large project to save footprint significantly, MBR cassette is also available upon customized design requirement, high cost effectiveness makes DELWED series a good option for new and replacement projects. The submerged membrane bioreactor is made with hollow fiber PVDF membrane, reinforced structure makes it suitable for municipal and industrial wastewater treatment without fiber breakage, 0.04μm pore size can effectively retain contaminants such as particles, colloides and bacteria as well as offering high flow rate.

Asahi KASEI Pall Microza UNA-620AB Retrofit

Fluoro-Pure Series Ultrafiltration module is developed to replace Asahi KASEI Pall Microza hollow fiber module UNA-620A UNA-620AB with same dimensions and operation principle, available membrane areas are 50㎡ and 65㎡ -sames as Pall or Asahi Kasei Microza module, it allows for cross-flow and dead-end filtration, 0.1μm pore size contributes to good rejection to contaminants as well as offering high flow rate.

Dow SFP-2880 2880XP Alternative

Fluoro-Pure DFP Series Ultrafiltration module is developed to replace Dow Ultrafiltration Membrane SFP 2880 with same dimensions and operation principle, compared with PES, PVC and PAN materials, PVDF has much better resistance to chemicals especially sodium hypochlorite-which is main chemical used for membrane cleaning.

Pentair Aquaflex 64 Retrofit

Fluoro-Free DELFLEX Series Ultrafiltration module DFPES9055 model can work as economical replacement for Pentair Norit Aquaflex HP 55 with better cost effectiveness, no modification is required because of its compatible dimensions, DFPES9055 can well fit into original membrane systems. Hollow fiber UF module allows for larger loading capacity with same space, 0.02μm pore size contributes to good rejection to bacteria and virus, PES material has very good hydrophilic feature and less membrane fouling.

Membrane Degasser

Hyflux Kristal K600B Retrofit

Fluoro-Pure D600ER Series UF filter is developed to replace Hyflux UF Membrane Kristal K600ER model, providing a more economical replacement solution and making sure retrofit module is 100% compatible with existing UF system.

IP-51XP IP-77XP Alternative

Fluoro-Pure DelPac Series Ultrafiltration module can be used as replacement for Dow IntegraPac membrane IP-51XP, IPD-51XP, IP-77XP and IPD-77XP series with compatible dimensions, PVDF hollow fiber UF membrane applies outside-in flow mode, it allows for wide range of feed water, making it a robust UF module.

Retrofit For Veolia ZW500D 600N Strength

Fluoro-Klean DELWED MBR membranes are direct replacement for Veolia ZW500D 340, ZW500D 370 and ZW500D 440 membrane modules with excellent 600N tensile strength, which is same as original membrane modules and there is no fiber breakage issue, 48M 52M MBR cassette is also available with stainless steel 316 material, each cassette can be equipped with 48, 50 and 52 modules, pulsed aeration technology contributes to less energy consumption and plant cost.

Ultrafiltration DFPVDFMAX60

Delta Filtration Ultrafiltration module DFPVDFMAX60 is equivalent to Hydranautics HYDRAcap MAX 60 UF membrane, with PVDF membrane of pore size 0.03μm, DFPVDFMAX60 can provide superior retention performance and offer log 4 rejection of Giardia cysts and Cryptosporidium oocysts.

Retrofit For 3M Liqui-Flux

Fluoro-Pure DFPESW10-75 Ultrafiltration module is made with hollow fiber Polyethersulfone(PES) membrane which is naturally hydrophilic and suitable for liquid filtration, it can be used to replace 3M MEMBRANA Liqui-Flux W10 Series UF membrane modules with better cost effectiveness.

Retrofit For XIGA XF40

DelGuard Series Ultrafiltration module is made with hollow fiber 100% Polyethersulfone(PES) membrane which is naturally hydrophilic and suitable for liquid filtration, it can be used to replace Pentair NORIT X-FLOW XIGA / SEAGUARD Series UF membrane modules in diverse applications including pretreatment for seawater SWRO desalination, drinking water treatment, injection water production, boiler feed water production etc.