DFPES10K9060-Pentair HFS 60 Retrofit
Fluoro-Pure DELFLEX Series DFPES10K9060 Ultrafiltration module is made with hollow fiber Polyethersulfone(PES) membrane with small pore size of 10,000 Dalton Mollecular Weight Cut-Off which can remove colloidal silica from surface water, it can be used to replace Pentair X-Flow HFS 60 tight ultrafiltration membrane with better cost effectiveness. PES material is naturally hydrophilic and less prone to membrane fouling, thus it can be designed with larger flux compared with PVDF material, and there is no need for air scour.
Features
● Tight pore size of 10,000 Dalton Molecular Weight Cut-Off
● 1:1 replacement for Pentair Ultrafiltration membrane
● Inside-out flow, no air scour needed
● Excellent chemical resistance
● Up to 60㎡ membrane area to enhance capacity
Application
● Surface water treatment
● Ultra pure water treatment
● Industrial wastewater treatment
● Pharmaceutical water treatment
| Model | DFPES10K9060 | |
| Specification | Membrane material | PES |
| Housing material | UPVC | |
| Pore size(MWCO) | 10K Dalton | |
| Inner diameter(mm) | 0.8 | |
| Outer diameter(mm) | 1.5 | |
| Membrane area(m2) | 60 | |
| Installation length(mm) | 1901-1905 | |
| Module diameter(mm) | 220 | |
| Connection size (Feed/Permeate/Concentrate) | DN65(73mm) | |
| Potting material | Epoxy resin | |
| Flow direction | Inside-out | |
| Operation parameter | Max chlorine concentration(ppm) | 500 |
| pH range | 2 - 13 | |
| Max feed pressure(Mpa) | 0.4 | |
| Max backwash pressure(Mpa) | 0.3 | |
| Max trans-membrane pressure (Mpa) | 0.3 | |
| Backwash flow(LMH) | 250 - 300 | |
| CEB Interval | 24 - 48 h | |
Category:
Pentair Equivalent
Keywords:
Roll Membrane | High Flow Filter | PP Pleated Filter
Contact Us
Tel: +86-513-89157856
Email: sales@delta-filtration.com
Product Description
Fluoro-Pure DELFLEX Series DFPES10K9060 Ultrafiltration module is made with hollow fiber Polyethersulfone(PES) membrane with small pore size of 10,000 Dalton Mollecular Weight Cut-Off which can remove colloidal silica from surface water, it can be used to replace Pentair X-Flow HFS 60 tight ultrafiltration membrane with better cost effectiveness. PES material is naturally hydrophilic and less prone to membrane fouling, thus it can be designed with larger flux compared with PVDF material, and there is no need for air scour.
Features
● Tight pore size of 10,000 Dalton Molecular Weight Cut-Off
● 1:1 replacement for Pentair Ultrafiltration membrane
● Inside-out flow, no air scour needed
● Excellent chemical resistance
● Up to 60㎡ membrane area to enhance capacity
Application
● Surface water treatment
● Ultra pure water treatment
● Industrial wastewater treatment
● Pharmaceutical water treatment
| Model | DFPES10K9060 | |
| Specification | Membrane material | PES |
| Housing material | UPVC | |
| Pore size(MWCO) | 10K Dalton | |
| Inner diameter(mm) | 0.8 | |
| Outer diameter(mm) | 1.5 | |
| Membrane area(m2) | 60 | |
| Installation length(mm) | 1901-1905 | |
| Module diameter(mm) | 220 | |
| Connection size (Feed/Permeate/Concentrate) | DN65(73mm) | |
| Potting material | Epoxy resin | |
| Flow direction | Inside-out | |
| Operation parameter | Max chlorine concentration(ppm) | 500 |
| pH range | 2 - 13 | |
| Max feed pressure(Mpa) | 0.4 | |
| Max backwash pressure(Mpa) | 0.3 | |
| Max trans-membrane pressure (Mpa) | 0.3 | |
| Backwash flow(LMH) | 250 - 300 | |
| CEB Interval | 24 - 48 h | |
Related Products
Send Inquiry