Retrofit For 3M HF40PP005D01 replacement
Delta Filtration high flow cartridge DFHFM5-40NH is 1:1 replacement for 3M HF40PP005D01 5micron 40inch water filter cartridge, with radial pleating technology, the filter can provide very large filtration area, high dirt holding capacity and low pressure drop performance. Multi-layers construction contributes high efficiency of 99.9%(β=1000). With “twist-to-lock” design, the filter can be replaced easily.
As professional manufacturer of high flow cartridges, Delta Filtration supplies economical replacement for major brands including PALL PARKER PENTAIR EATON etc.
|
Features |
Benefits |
Advantages |
|
Radial pleating technology |
Up to 70% increase in surface area |
Higher processing capability with greater flow |
|
Increased surface area of cartridge |
Lower pressure drop |
Fewer change-out, less maintenance costs |
|
Single/Double O-rings Seal |
Positive seal with no bypass |
High product quality |
|
6.5inch large diameter |
Fewer filter usage |
Less footprint |
Industries and Applications
Food&Beverage:Bottled water, Beers, Wines, Soft drinks
Fine chemicals:Polymers, Solvents, acids
Water Treatment: sea water desalination
Oil & Gas: Water injection, Amine filtration, Glycols
Power Generation: boiler feed water, condensate water
|
Materials of Construction |
|
|
Filter Media |
Polypropylene/Glass Fiber |
|
End Caps |
Polypropylene |
|
Inside Core |
Polypropylene |
|
Outside Core |
Netting |
|
O-Rings |
Silicone/EPDM/NBR |
|
Dimensions(Nominal) |
|
|
Nominal Outside Diameter : |
6.5inch/165mm |
|
Nominal Inside Diameter |
3.15inch/80mm 1.57inch/40mm |
|
Length |
40inch/60inch/65inch |
|
Micron Ratings |
1μm,3μm,5μm,10μm,20μm, 30μm,50μm,75μm,100μm |
|
Operating Condition |
|
|
Maximum Temperature: |
Polypropylene 180℉ (82 ℃) Glass Fiber 248℉ (121 ℃) |
|
Maximum Pressure: |
49psi (3.4bar) @ 68 ℉ (20 ℃) |
|
Recommended change-out pressure: |
35psi (2.4bar) @ 68 ℉ (20 ℃) |
Order Information
|
For Example: DFHFM 5 - 40 N H |
|||||||
|
DFHF |
Series |
Rating |
- |
Length |
Material |
O-Ring |
Connect type |
|
Delta Filtration High Flow |
M=Pleat Plus M |
1=1μm 3=3μm 5=5μm 10=10μm 20=20μm 30=30μm 50=50μm 75=75μm 100=100μm |
NA |
20=20inch 40=40inch 60=60inch 65=65inch
|
Blank=Polypropylene G=Glass Fiber
|
S=Silicone E=EPDM N=NBR |
H=Handle C=Cross Small Connector
|
Category:
High Flow Filter
Keywords:
Roll Membrane | High Flow Filter | PP Pleated Filter
Contact Us
Tel: +86-513-89157856
Email: sales@delta-filtration.com
Product Description
Delta Filtration high flow cartridge DFHFM5-40NH is 1:1 replacement for 3M HF40PP005D01 5micron 40inch water filter cartridge, with radial pleating technology, the filter can provide very large filtration area, high dirt holding capacity and low pressure drop performance. Multi-layers construction contributes high efficiency of 99.9%(β=1000). With “twist-to-lock” design, the filter can be replaced easily.
As professional manufacturer of high flow cartridges, Delta Filtration supplies economical replacement for major brands including PALL PARKER PENTAIR EATON etc.
|
Features |
Benefits |
Advantages |
|
Radial pleating technology |
Up to 70% increase in surface area |
Higher processing capability with greater flow |
|
Increased surface area of cartridge |
Lower pressure drop |
Fewer change-out, less maintenance costs |
|
Single/Double O-rings Seal |
Positive seal with no bypass |
High product quality |
|
6.5inch large diameter |
Fewer filter usage |
Less footprint |
Industries and Applications
Food&Beverage:Bottled water, Beers, Wines, Soft drinks
Fine chemicals:Polymers, Solvents, acids
Water Treatment: sea water desalination
Oil & Gas: Water injection, Amine filtration, Glycols
Power Generation: boiler feed water, condensate water
|
Materials of Construction |
|
|
Filter Media |
Polypropylene/Glass Fiber |
|
End Caps |
Polypropylene |
|
Inside Core |
Polypropylene |
|
Outside Core |
Netting |
|
O-Rings |
Silicone/EPDM/NBR |
|
Dimensions(Nominal) |
|
|
Nominal Outside Diameter : |
6.5inch/165mm |
|
Nominal Inside Diameter |
3.15inch/80mm 1.57inch/40mm |
|
Length |
40inch/60inch/65inch |
|
Micron Ratings |
1μm,3μm,5μm,10μm,20μm, 30μm,50μm,75μm,100μm |
|
Operating Condition |
|
|
Maximum Temperature: |
Polypropylene 180℉ (82 ℃) Glass Fiber 248℉ (121 ℃) |
|
Maximum Pressure: |
49psi (3.4bar) @ 68 ℉ (20 ℃) |
|
Recommended change-out pressure: |
35psi (2.4bar) @ 68 ℉ (20 ℃) |
Order Information
|
For Example: DFHFM 5 - 40 N H |
|||||||
|
DFHF |
Series |
Rating |
- |
Length |
Material |
O-Ring |
Connect type |
|
Delta Filtration High Flow |
M=Pleat Plus M |
1=1μm 3=3μm 5=5μm 10=10μm 20=20μm 30=30μm 50=50μm 75=75μm 100=100μm |
NA |
20=20inch 40=40inch 60=60inch 65=65inch
|
Blank=Polypropylene G=Glass Fiber
|
S=Silicone E=EPDM N=NBR |
H=Handle C=Cross Small Connector
|
Related Products
Send Inquiry