Retrofit For 3M HF60PP005D01 replacement
Delta Filtration supplies DFHFM5-60NH as alternative for 3M HF60PP005D01 5micron 60inch water filter cartridge, with radial pleating technology, the filter can provide large filtration area up to 16㎡, high dirt holding capacity and low pressure drop performance. Multi-layers construction contributes high efficiency of 99.9%(β=1000). With “twist-to-lock” design, the filter can be replaced easily.
Delta Filtration uses FDA compliant materials for its filter cartridge production, thus it can be used in wide range of filtration process including Food&Beverage, Pharmaceutical and drinking water treatment applications.
|
Features |
Benefits |
Advantages |
|
Radial pleating technology |
Up to 70% increase in surface area |
Higher processing capability with greater flow |
|
Increased surface area of cartridge |
Lower pressure drop |
Fewer change-out, less maintenance costs |
|
Single/Double O-rings Seal |
Positive seal with no bypass |
High product quality |
|
6.5inch large diameter |
Fewer filter usage |
Less footprint |
Industries and Applications
Food&Beverage:Bottled water, Beers, Wines, Soft drinks
Fine chemicals:Polymers, Solvents, acids
Water Treatment: sea water desalination
Oil & Gas: Water injection, Amine filtration, Glycols
Power Generation: boiler feed water, condensate water
|
Materials of Construction |
|
|
Filter Media |
Polypropylene/Glass Fiber |
|
End Caps |
Polypropylene |
|
Inside Core |
Polypropylene |
|
Outside Core |
Netting |
|
O-Rings |
Silicone/EPDM/NBR |
|
Dimensions(Nominal) |
|
|
Nominal Outside Diameter : |
6.5inch/165mm |
|
Nominal Inside Diameter |
3.15inch/80mm 1.57inch/40mm |
|
Length |
40inch/60inch/65inch |
|
Micron Ratings |
1μm,3μm,5μm,10μm,20μm, 30μm,50μm,75μm,100μm |
|
Operating Condition |
|
|
Maximum Temperature: |
Polypropylene 180℉ (82 ℃) Glass Fiber 248℉ (121 ℃) |
|
Maximum Pressure: |
49psi (3.4bar) @ 68 ℉ (20 ℃) |
|
Recommended change-out pressure: |
35psi (2.4bar) @ 68 ℉ (20 ℃) |
Order Information
|
For Example: DFHFM 5 - 60 N H |
|||||||
|
DFHF |
Series |
Rating |
- |
Length |
Material |
O-Ring |
Connect type |
|
Delta Filtration High Flow |
M=Pleat Plus M |
1=1μm 3=3μm 5=5μm 10=10μm 20=20μm 30=30μm 50=50μm 75=75μm 100=100μm |
NA |
20=20inch 40=40inch 60=60inch 65=65inch
|
Blank=Polypropylene G=Glass Fiber
|
S=Silicone E=EPDM N=NBR |
H=Handle C=Cross Small Connector
|
Category:
High Flow Filter
Keywords:
Roll Membrane | High Flow Filter | PP Pleated Filter
Contact Us
Tel: +86-513-89157856
Email: sales@delta-filtration.com
Product Description
Delta Filtration supplies DFHFM5-60NH as alternative for 3M HF60PP005D01 5micron 60inch water filter cartridge, with radial pleating technology, the filter can provide large filtration area up to 16㎡, high dirt holding capacity and low pressure drop performance. Multi-layers construction contributes high efficiency of 99.9%(β=1000). With “twist-to-lock” design, the filter can be replaced easily.
Delta Filtration uses FDA compliant materials for its filter cartridge production, thus it can be used in wide range of filtration process including Food&Beverage, Pharmaceutical and drinking water treatment applications.
|
Features |
Benefits |
Advantages |
|
Radial pleating technology |
Up to 70% increase in surface area |
Higher processing capability with greater flow |
|
Increased surface area of cartridge |
Lower pressure drop |
Fewer change-out, less maintenance costs |
|
Single/Double O-rings Seal |
Positive seal with no bypass |
High product quality |
|
6.5inch large diameter |
Fewer filter usage |
Less footprint |
Industries and Applications
Food&Beverage:Bottled water, Beers, Wines, Soft drinks
Fine chemicals:Polymers, Solvents, acids
Water Treatment: sea water desalination
Oil & Gas: Water injection, Amine filtration, Glycols
Power Generation: boiler feed water, condensate water
|
Materials of Construction |
|
|
Filter Media |
Polypropylene/Glass Fiber |
|
End Caps |
Polypropylene |
|
Inside Core |
Polypropylene |
|
Outside Core |
Netting |
|
O-Rings |
Silicone/EPDM/NBR |
|
Dimensions(Nominal) |
|
|
Nominal Outside Diameter : |
6.5inch/165mm |
|
Nominal Inside Diameter |
3.15inch/80mm 1.57inch/40mm |
|
Length |
40inch/60inch/65inch |
|
Micron Ratings |
1μm,3μm,5μm,10μm,20μm, 30μm,50μm,75μm,100μm |
|
Operating Condition |
|
|
Maximum Temperature: |
Polypropylene 180℉ (82 ℃) Glass Fiber 248℉ (121 ℃) |
|
Maximum Pressure: |
49psi (3.4bar) @ 68 ℉ (20 ℃) |
|
Recommended change-out pressure: |
35psi (2.4bar) @ 68 ℉ (20 ℃) |
Order Information
|
For Example: DFHFM 5 - 60 N H |
|||||||
|
DFHF |
Series |
Rating |
- |
Length |
Material |
O-Ring |
Connect type |
|
Delta Filtration High Flow |
M=Pleat Plus M |
1=1μm 3=3μm 5=5μm 10=10μm 20=20μm 30=30μm 50=50μm 75=75μm 100=100μm |
NA |
20=20inch 40=40inch 60=60inch 65=65inch
|
Blank=Polypropylene G=Glass Fiber
|
S=Silicone E=EPDM N=NBR |
H=Handle C=Cross Small Connector
|
Related Products
Send Inquiry