Retrofit For PALL HFU660UY045J replacement

Delta Filtration DFHFP5-60EC high flow cartridges have been used in applications including drinking water treatment, power generation, sea water desalination plant and refineries etc.

Features

1.Super high flow filtration capacity up to 110m³/hr

2.Absolute rating 99.98%(β=5000）

3.High quality permeate with low SDI and turbidity

4.Retrofit for below vendors:

Brand	Series
Pall	Ultipleat high flow
3M Cuno	High Flow HFR Series
Parker	Fulflo® ParMax™ SELECT
Eaton	LOFPLEAT™ HF Series
Amazon Filters	SupaPleat HFC
Graver Technologies	HIGH FLOW FILTER SERIES

Materials of Construction
Filter Media	Polypropylene/Glass Fiber
End Caps	Polypropylene
Inside Core	NA or Polypropylene
Outside Core	Polypropylene or Binding
O-Rings	Silicone/EPDM/NBR
Dimensions(Nominal)
Nominal Outside Diameter :	6inch/152mm
Nominal Inside Diameter	3inch/76mm
Length	20 / 40 / 60 / 80 inches
Micron Ratings	1μm,3μm,5μm,10μm,20μm, 30μm,50μm,75μm,100μm

Operating Condition
Maximum Temperature:	180℉ (82 ℃)
Maximum Pressure:	58psi (4bar) @ 68 ℉ (20 ℃)
Recommended change-out pressure:	35psi (2.4bar) @ 68 ℉ (20 ℃)

Order Information

For Example: DFHFP 5 - 60 E C

DFHF

Series

Rating

Length

Material

O-Ring

Cage

Delta Filtration High Flow

P=Pleat Plus P

1=1μm

3=3μm

5=5μm

10=10μm

20=20μm

30=30μm

50=50μm

75=75μm

100=100μm

20=20inch

40=40inch

60=60inch

80=80inch

Blank=Polypropylene

G=Glass Fiber

S=Silicone

E=EPDM

N=NBR

V=Viton

C=Cage

B=Belt

Send Inquiry

Contact

Category:

High Flow Filter

Keywords:

Roll Membrane | High Flow Filter | PP Pleated Filter

Tel: +86-513-89157856
Email: sales@delta-filtration.com

Pleat Plus P Series cartridge is retrofit series for PALL Ultipleat high flow filter, Delta Filtration DFHFP5-60EC model can work as economical replacement for PALL HFU660UY045J with compatible dimensions and similar performance. Reinforced cage and robust inner core can provide excellent pressure resistance. Delta Filtration DFHFP5-60EC high flow cartridges have been used in applications including drinking water treatment, power generation, sea water desalination plant and refineries etc.

Product Description

Delta Filtration DFHFP5-60EC high flow cartridges have been used in applications including drinking water treatment, power generation, sea water desalination plant and refineries etc.

Features

1.Super high flow filtration capacity up to 110m³/hr

2.Absolute rating 99.98%(β=5000）

3.High quality permeate with low SDI and turbidity

4.Retrofit for below vendors:

Brand	Series
Pall	Ultipleat high flow
3M Cuno	High Flow HFR Series
Parker	Fulflo® ParMax™ SELECT
Eaton	LOFPLEAT™ HF Series
Amazon Filters	SupaPleat HFC
Graver Technologies	HIGH FLOW FILTER SERIES

Materials of Construction
Filter Media	Polypropylene/Glass Fiber
End Caps	Polypropylene
Inside Core	NA or Polypropylene
Outside Core	Polypropylene or Binding
O-Rings	Silicone/EPDM/NBR
Dimensions(Nominal)
Nominal Outside Diameter :	6inch/152mm
Nominal Inside Diameter	3inch/76mm
Length	20 / 40 / 60 / 80 inches
Micron Ratings	1μm,3μm,5μm,10μm,20μm, 30μm,50μm,75μm,100μm

Operating Condition
Maximum Temperature:	180℉ (82 ℃)
Maximum Pressure:	58psi (4bar) @ 68 ℉ (20 ℃)
Recommended change-out pressure:	35psi (2.4bar) @ 68 ℉ (20 ℃)

Order Information

For Example: DFHFP 5 - 60 E C

DFHF

Series

Rating

Length

Material

O-Ring

Cage

Delta Filtration High Flow

P=Pleat Plus P

1=1μm

3=3μm

5=5μm

10=10μm

20=20μm

30=30μm

50=50μm

75=75μm

100=100μm

20=20inch

40=40inch

60=60inch

80=80inch

Blank=Polypropylene

G=Glass Fiber

S=Silicone

E=EPDM

N=NBR

V=Viton

C=Cage

B=Belt

Related Products

AQUAFLEX HP PVC 0.8mm

8" AQUAFLEX HP PVC 0.8mm UFCLE Ultrafiltration module is used for production of process and potable water as well as WWTP effluent, Delta Filtration DFPES9055 model can be used to replace Pentair AQUAFLEX HP PVC 0.8mm membrane with compatible dimensions which means no piping modification is required.

Retrofit For Pentair X-Flow XIGA 40

DelGuard Series Ultrafiltration module is made with hollow fiber 100% Polyethersulfone(PES) membrane which is naturally hydrophilic and suitable for liquid filtration, it can be used to replace Pentair X-FLOW XIGA / SEAGUARD Series UF membrane modules in diverse applications including pretreatment for seawater SWRO desalination, drinking water treatment, injection water production, boiler feed water production etc., DFPES9040XG model is installed horizontally into pressure vessel, it can significantly save space compared with vertically installed modules.

Hyflux Kristal K600B Retrofit

Fluoro-Pure D600ER Series UF filter is developed to replace Hyflux UF Membrane Kristal K600ER model, providing a more economical replacement solution and making sure retrofit module is 100% compatible with existing UF system.

IP-51XP IP-77XP Alternative

Fluoro-Pure DelPac Series Ultrafiltration module can be used as replacement for Dow IntegraPac membrane IP-51XP, IPD-51XP, IP-77XP and IPD-77XP series with compatible dimensions, PVDF hollow fiber UF membrane applies outside-in flow mode, it allows for wide range of feed water, making it a robust UF module.

IP-51 IP-77 Alternative

Fluoro-Pure DelPac Series Ultrafiltration module is developed to replace Dow IntegraPac membrane IP-51 and IP-77 cross flow ultrafiltration filter with compatible dimensions at much more economical price, compared with PES, PVC and PAN materials, PVDF has better tensile strength and much better resistance to chemicals especially sodium hypochlorite-which is main chemical used for membrane cleaning.

Retrofit For Veolia ZW500D 600N Strength

Fluoro-Klean DELWED MBR membranes are direct replacement for Veolia ZW500D 340, ZW500D 370 and ZW500D 440 membrane modules with excellent 600N tensile strength, which is same as original membrane modules and there is no fiber breakage issue, 48M 52M MBR cassette is also available with stainless steel 316 material, each cassette can be equipped with 48, 50 and 52 modules, pulsed aeration technology contributes to less energy consumption and plant cost.

Ultrafiltration DFPVDFMAX60

Delta Filtration Ultrafiltration module DFPVDFMAX60 is equivalent to Hydranautics HYDRAcap MAX 60 UF membrane, with PVDF membrane of pore size 0.03μm, DFPVDFMAX60 can provide superior retention performance and offer log 4 rejection of Giardia cysts and Cryptosporidium oocysts.

Retrofit For 3M Liqui-Flux

Fluoro-Pure DFPESW10-75 Ultrafiltration module is made with hollow fiber Polyethersulfone(PES) membrane which is naturally hydrophilic and suitable for liquid filtration, it can be used to replace 3M MEMBRANA Liqui-Flux W10 Series UF membrane modules with better cost effectiveness.

Retrofit For XIGA XF40

DelGuard Series Ultrafiltration module is made with hollow fiber 100% Polyethersulfone(PES) membrane which is naturally hydrophilic and suitable for liquid filtration, it can be used to replace Pentair NORIT X-FLOW XIGA / SEAGUARD Series UF membrane modules in diverse applications including pretreatment for seawater SWRO desalination, drinking water treatment, injection water production, boiler feed water production etc.

Retrofit For Pentair X-Flow XF75

Delta Filtration Ultrafiltration module DFPES9075 is made with hollow fiber Polyethersulfone(PES) membrane which is naturally hydrophilic, it has compact design with large filtration area up to 75㎡, as economical replacement for Pentair X-Flow XF75 model, DFPES9075 can significantly save operation and maintenance costs for customers. Hollow fiber UF module allows for larger loading capacity with same space, 0.02μm pore size contributes to good rejection to bacteria and virus, Delta UF modules have been exported to many customers from North America, Europe and Asia etc with positive feedback, OEM label service is available.

Retrofit For TwinFilter Pleatflow TH

Retrofit For LG G-Brane P7 MR-MHP07A

Fluoro-Pure DELFIL Ultrafiltration model DFUFPVDF8575G is made with hollow fiber PVDF 75㎡ effective filtration area, it can work as economical replacement for LG G-Brane P7 MR-MHP07A and Synopex G-Brane P7 UF Membrane, typical working pressure is 3 bar. DFUFPVDF8575G UF module is produced with 0.1μm membrane fiber with excellent tensile strength, the module can be operated based on both cross-flow and dead-end mode, it can be used for drinking water process and wastewater reuse applications.