Retrofit For Microdyn PureULTRA PHF-35-V
Fluoro-Pure DeFlow Series DFPVDF1030 module is made with hollow fiber PVDF membrane material, it can directly replace Microdyn Nadir PureULTRA PHF-35-V ultrafiltration module without the need to change piping and fitting. DFPVDF1030 uses permanent hydrophilic PVDF membrane fibers which can provide high flux and stable flow performance, sophisticated module potting can optimizes inner water flow distribution and air scour performance.
Fluoro-Pure UF membrane module can also be used to replace Microdyn Nadir PureULTRA PHF-75-V and PureULTRA PHF-105-V model with similar performance, with production center only 120KM away from Shanghai, fast delivery service is available.
Features
● 0.03μm pore size produces high quality filtrate
● Compact design, less footprint
● Bacteria and virus removal performance
● Typical permeate SDI<3, turbidity <0.1NTU
Application
● Municipal water treatment
● Food&Beverage pure water production
● Industrial wastewater treatment
● Cross-flow wine filtration
Specification
| Model | DFPVDF1030 | DFPVDF1060 | DFPVDF1080 | |
| Specification | Membrane material | PVDF | PVDF | PVDF |
| Housing material | UPVC | UPVC | UPVC | |
| Pore size(μm) | 0.03 | 0.03 | 0.03 | |
| Inner diameter(mm) | 0.7 | 0.7 | 0.7 | |
| Outer diameter(mm) | 1.3 | 1.3 | 1.3 | |
| Membrane area(m2) | 35 | 75 | 105 | |
| Overall length(mm) | 965 | 1,715 | 2,215 | |
| Module diameter(mm) | 250 | 250 | 250 | |
| Connection size | DN50 | DN50 | DN50 | |
| Potting material | Epoxy resin | Epoxy resin | Epoxy resin | |
| Bacterial rejection | >4 log | >4 log | >4 log | |
| Operation parameter | Max chlorine concentration(ppm) | 3,000 | 3,000 | 3,000 |
| pH range | 1.0 - 13 | 1.0 - 13 | 1.0 - 13 | |
| Max backwash pressure(Mpa) | 0.2 | 0.2 | 0.2 | |
| Max feed pressure(Mpa) | 0.5 | 0.5 | 0.5 | |
| Backwash flow(LMH) | 90 - 110 | 90 - 110 | 90 - 110 | |
| Backwash duration | 30 - 120 seconds | |||
| Backwash frequency | 15 - 60 minutes | |||
| Air scour rate(Nm3/h) | 5 - 12 | |||
| Design flux(LMH) | 50 - 120 | |||
Category:
Ultrafiltration Membrane
Microdyn Nadir Equivalent
Keywords:
Roll Membrane | High Flow Filter | PP Pleated Filter
Contact Us
Tel: +86-513-89157856
Email: sales@delta-filtration.com
Product Description
Fluoro-Pure DeFlow Series DFPVDF1030 module is made with hollow fiber PVDF membrane material, it can directly replace Microdyn Nadir PureULTRA PHF-35-V ultrafiltration module without the need to change piping and fitting. DFPVDF1030 uses permanent hydrophilic PVDF membrane fibers which can provide high flux and stable flow performance, sophisticated module potting can optimizes inner water flow distribution and air scour performance.
Fluoro-Pure UF membrane module can also be used to replace Microdyn Nadir PureULTRA PHF-75-V and PureULTRA PHF-105-V model with similar performance, with production center only 120KM away from Shanghai, fast delivery service is available.
Features
● 0.03μm pore size produces high quality filtrate
● Compact design, less footprint
● Bacteria and virus removal performance
● Typical permeate SDI<3, turbidity <0.1NTU
Application
● Municipal water treatment
● Food&Beverage pure water production
● Industrial wastewater treatment
● Cross-flow wine filtration
Specification
| Model | DFPVDF1030 | DFPVDF1060 | DFPVDF1080 | |
| Specification | Membrane material | PVDF | PVDF | PVDF |
| Housing material | UPVC | UPVC | UPVC | |
| Pore size(μm) | 0.03 | 0.03 | 0.03 | |
| Inner diameter(mm) | 0.7 | 0.7 | 0.7 | |
| Outer diameter(mm) | 1.3 | 1.3 | 1.3 | |
| Membrane area(m2) | 35 | 75 | 105 | |
| Overall length(mm) | 965 | 1,715 | 2,215 | |
| Module diameter(mm) | 250 | 250 | 250 | |
| Connection size | DN50 | DN50 | DN50 | |
| Potting material | Epoxy resin | Epoxy resin | Epoxy resin | |
| Bacterial rejection | >4 log | >4 log | >4 log | |
| Operation parameter | Max chlorine concentration(ppm) | 3,000 | 3,000 | 3,000 |
| pH range | 1.0 - 13 | 1.0 - 13 | 1.0 - 13 | |
| Max backwash pressure(Mpa) | 0.2 | 0.2 | 0.2 | |
| Max feed pressure(Mpa) | 0.5 | 0.5 | 0.5 | |
| Backwash flow(LMH) | 90 - 110 | 90 - 110 | 90 - 110 | |
| Backwash duration | 30 - 120 seconds | |||
| Backwash frequency | 15 - 60 minutes | |||
| Air scour rate(Nm3/h) | 5 - 12 | |||
| Design flux(LMH) | 50 - 120 | |||
Related Products
Send Inquiry