Retrofit for Pentair X-Flow Aquaflex 55 XF55
Delta Filtration DELFLEX series DFPES9055 model is equivalent to Pentair X-Flow Aquaflex 55 XF55 ultrafiltration membrane with compatible dimensions and similar performance, membrane area is 55㎡ by hollow fiber polyethersulfone or PES material, it is suitable for process filtration, potable water filtration, wastewater reuse and desalination process etc.
Pentair Aquaflex 55 modules are with inside-out flow, when replacing by Delta DFPES9055 model, there is no need to change PLC program and operation, just play-and-play design, however, to ensure its stable performance in the long run, cross flow operation is suggested.
Features
● Superior hydrophilic PES membrane
● Good mechanical strength
● Inside-out flow direction
● Excellent chemical resistance
● Typical permeate SDI<3, turbidity <0.1NTU
Application
● Potable water filtration
● SWRO desalination plant pretreatment
● Refinery wastewater treatment
● Boiler water and condensate treatment
● Food&Beverage wastewater treatment
| Model | DFPES9040 | DFPES9055 | DFPES9064 | |
| Specification | Membrane material | PES | PES | PES |
| Housing material | UPVC | UPVC | UPVC | |
| Pore size(μm) | 0.02 | 0.02 | 0.02 | |
| Inner diameter(mm) | 0.8 | 0.8 | 0.8 | |
| Outer diameter(mm) | 1.5 | 1.5 | 1.5 | |
| Membrane area(m2) | 40 | 55 | 64 | |
| Installation length(mm) | 1901-1905 | 1901-1905 | 1901-1905 | |
| Module diameter(mm) | 220 | 220 | 220 | |
| Connection size (Feed/Permeate/Concentrate) |
DN65(73mm) | DN65(73mm) | DN65(73mm) | |
| Potting material | Epoxy resin | Epoxy resin | Epoxy resin | |
| Flow direction | Inside-out | Inside-out | Inside-out | |
| Operation parameter | Max chlorine concentration(ppm) | 500 | 500 | 500 |
| pH range | 2 - 13 | 2 - 13 | 2 - 13 | |
| Working temperature(℃) | 5 - 40 | 5 - 40 | 5 - 40 | |
| Max feed pressure(Mpa) | 0.3 | 0.3 | 0.3 | |
| Max backwash pressure(Mpa) | 0.2 | 0.2 | 0.2 | |
| Max trans-membrane pressure (Mpa) | 0.2 | 0.2 | 0.2 | |
| Max backwash flow(L/㎡/h) | 250~300 | 250~300 | 250~300 | |
Category:
Pentair Equivalent
Keywords:
Roll Membrane | High Flow Filter | PP Pleated Filter
Contact Us
Tel: +86-513-89157856
Email: sales@delta-filtration.com
Product Description
Delta Filtration DELFLEX series DFPES9055 model is equivalent to Pentair X-Flow Aquaflex 55 XF55 ultrafiltration membrane with compatible dimensions and similar performance, membrane area is 55㎡ by hollow fiber polyethersulfone or PES material, it is suitable for process filtration, potable water filtration, wastewater reuse and desalination process etc.
Pentair Aquaflex 55 modules are with inside-out flow, when replacing by Delta DFPES9055 model, there is no need to change PLC program and operation, just play-and-play design, however, to ensure its stable performance in the long run, cross flow operation is suggested.
Features
● Superior hydrophilic PES membrane
● Good mechanical strength
● Inside-out flow direction
● Excellent chemical resistance
● Typical permeate SDI<3, turbidity <0.1NTU
Application
● Potable water filtration
● SWRO desalination plant pretreatment
● Refinery wastewater treatment
● Boiler water and condensate treatment
● Food&Beverage wastewater treatment
| Model | DFPES9040 | DFPES9055 | DFPES9064 | |
| Specification | Membrane material | PES | PES | PES |
| Housing material | UPVC | UPVC | UPVC | |
| Pore size(μm) | 0.02 | 0.02 | 0.02 | |
| Inner diameter(mm) | 0.8 | 0.8 | 0.8 | |
| Outer diameter(mm) | 1.5 | 1.5 | 1.5 | |
| Membrane area(m2) | 40 | 55 | 64 | |
| Installation length(mm) | 1901-1905 | 1901-1905 | 1901-1905 | |
| Module diameter(mm) | 220 | 220 | 220 | |
| Connection size (Feed/Permeate/Concentrate) |
DN65(73mm) | DN65(73mm) | DN65(73mm) | |
| Potting material | Epoxy resin | Epoxy resin | Epoxy resin | |
| Flow direction | Inside-out | Inside-out | Inside-out | |
| Operation parameter | Max chlorine concentration(ppm) | 500 | 500 | 500 |
| pH range | 2 - 13 | 2 - 13 | 2 - 13 | |
| Working temperature(℃) | 5 - 40 | 5 - 40 | 5 - 40 | |
| Max feed pressure(Mpa) | 0.3 | 0.3 | 0.3 | |
| Max backwash pressure(Mpa) | 0.2 | 0.2 | 0.2 | |
| Max trans-membrane pressure (Mpa) | 0.2 | 0.2 | 0.2 | |
| Max backwash flow(L/㎡/h) | 250~300 | 250~300 | 250~300 | |
Related Products
Send Inquiry