Esperanto
Shqiptare
Euskara
Zulu
Latinus
Cymraeg
தமிழ்
Slovak
Slovak
Afrikaans
Retrofit For Pentair Seaguard-ST
DelGuard Series Ultrafiltration module is made with hydrophilic Polyethersulfone(PES) membrane with size 200x1527.5mm as economical replacement for Pentair SEAGUARD-ST Series UF membrane modules, hydraulic membrane diameter is 0.8mm, with inside-out flow mode, it can be installed horizontally into membrane pressure vessel, thus saving footprint and land space.
DFDGPES9040 UF membrane modules have been used in many applications such as power plant, pretreatment of RO membrane system in desalination plant and potable water treatment etc.
Features
● 0.02μm pore size produces high quality filtrate
● Direct replacement for Pentair Seaguard-ST
● Inside-out flow with horizontal installation
● Excellent chemical resistance
● Typical permeate SDI<3, turbidity <0.1NTU
| Model | DFDGPES9040 | |
| Specification | Membrane material | PES |
| Housing material | PVC | |
| Pore size(μm) | 0.02 | |
| Inner diameter(mm) | 0.8 | |
| Outer diameter(mm) | 1.5 | |
| Membrane area(m2) | 40 | |
| Module length(mm) | 1,527.5 | |
| Element outer diameter(mm) | 200 | |
| Permeate collector inner diameter(mm) | 42.6 | |
| Potting material | Epoxy resin(EP) | |
| Flow direction | Inside-out | |
| Operation parameter | Max chlorine concentration(ppm) | 500 |
| pH range | 2 - 13 | |
| Working temperature(℃) | 5 - 40 | |
| Design flux(LMH) | 60 - 135 | |
| Max feed pressure(Mpa) | 0.4 | |
| Max trans-membrane pressure (Mpa) | 0.3 | |
| Max backwash pressure(Mpa) | 0.3 | |
| Backwash flow(LMH) | 250 - 300 | |
| CEB Interval | 24 - 48 h | |
Category:
Pentair Equivalent
Keywords:
Roll Membrane | High Flow Filter | PP Pleated Filter
Contact Us
Tel: +86-513-89157856
Email: sales@delta-filtration.com
Product Description
DelGuard Series Ultrafiltration module is made with hydrophilic Polyethersulfone(PES) membrane with size 200x1527.5mm as economical replacement for Pentair SEAGUARD-ST Series UF membrane modules, hydraulic membrane diameter is 0.8mm, with inside-out flow mode, it can be installed horizontally into membrane pressure vessel, thus saving footprint and land space.
DFDGPES9040 UF membrane modules have been used in many applications such as power plant, pretreatment of RO membrane system in desalination plant and potable water treatment etc.
Features
● 0.02μm pore size produces high quality filtrate
● Direct replacement for Pentair Seaguard-ST
● Inside-out flow with horizontal installation
● Excellent chemical resistance
● Typical permeate SDI<3, turbidity <0.1NTU
| Model | DFDGPES9040 | |
| Specification | Membrane material | PES |
| Housing material | PVC | |
| Pore size(μm) | 0.02 | |
| Inner diameter(mm) | 0.8 | |
| Outer diameter(mm) | 1.5 | |
| Membrane area(m2) | 40 | |
| Module length(mm) | 1,527.5 | |
| Element outer diameter(mm) | 200 | |
| Permeate collector inner diameter(mm) | 42.6 | |
| Potting material | Epoxy resin(EP) | |
| Flow direction | Inside-out | |
| Operation parameter | Max chlorine concentration(ppm) | 500 |
| pH range | 2 - 13 | |
| Working temperature(℃) | 5 - 40 | |
| Design flux(LMH) | 60 - 135 | |
| Max feed pressure(Mpa) | 0.4 | |
| Max trans-membrane pressure (Mpa) | 0.3 | |
| Max backwash pressure(Mpa) | 0.3 | |
| Backwash flow(LMH) | 250 - 300 | |
| CEB Interval | 24 - 48 h | |
Related Products
Retrofit For Pentair X-Flow XIGA 40
Retrofit For Veolia ZW500D 600N Strength
Retrofit For Pentair X-Flow XF75
Retrofit For LG G-Brane P7 MR-MHP07A
Send Inquiry
Delta Filtration Material Co.Ltd.
Sales office: 2811, Block B, Zhongnan CBD, Nantong, Jiangsu, China
Tel: 86-(0)51389157856
WhatsApp: +86-13477006021
Email: sales@delta-filtration.com
www.dt-filtri.com
www.delta-filtration.com
Customer message