Retrofit For Hydranautics HYDRAcap-60
Fluoro-Pure DELCAP Series Ultrafiltration module DFPES9056 is equivalent to Hydranautics HYDRAcap-60 UF membrane with PES membrane of pore size 0.02μm, it can be used in surface water, industrial water and wastewater treatment process.
With inside-out flow mode, DFPES9056 UF module is suitable for water with low turbidities, compared with outside-in PVDF UF, DFPES9056 requires more strict pretreatment.
Features
● 0.02μm finner pore size with log 4 retention
● Direct replacement for HYDRAcap-60
● High recovery after chemical cleaning
● Inside-out flow operation
Application
● Drinking water treatment
● Ultra pure water treatment
● Wastewater reuse process
● Oil&Gas water treatment
Specification
| Model | DFPES9056 | |||
| Specification | Membrane material | Capillary PES | ||
| Housing material | UPVC | |||
| Pore size(μm) | 0.02 | |||
| Membrane area(m2) | 56 | |||
| L length(mm) | 1708 | |||
| D diameter(mm) | 250 | |||
| Connection size | 2‘’ Victaulic | |||
| Potting material | Epoxy resin | |||
| Operating mode | Inside-out | |||
| Operation parameter | Instantaneous chlorine concentration(ppm) | 500 | ||
| Operation chlorine concentration(ppm) | 200 | |||
| Max feed turbidity | 100 NTU(Instantaneous) | |||
| Operating pH range | 4.0 - 10 | |||
| Cleaning pH range | 1.0 - 13 | |||
| Max backwash pressure(Mpa) | 0.2 | |||
| Max feed pressure(Mpa) | 0.5 | |||
| Air scour | Not required | |||
| Backwash duration | 30 - 60 s | |||
| Backwash frequency | every 20 - 60min | |||
| Maintenance cleaning frequency | 1 - 4 times/day | |||
| Maintenance cleaning duration | 1 - 30 min | |||
| Cleaning chemicals | NaOH, HCl, Citric acid | |||
| Design flux(LMH) | 30 - 120 | |||
| Filtrate quality | Turbidity | ≤0.1 NTU | ||
| Bacterial rejection | >4 log | |||
Category:
Hydranautics Equivalent
Keywords:
Roll Membrane | High Flow Filter | PP Pleated Filter
Contact Us
Tel: +86-513-89157856
Email: sales@delta-filtration.com
Product Description
Fluoro-Pure DELCAP Series Ultrafiltration module DFPES9056 is equivalent to Hydranautics HYDRAcap-60 UF membrane with PES membrane of pore size 0.02μm, it can be used in surface water, industrial water and wastewater treatment process.
With inside-out flow mode, DFPES9056 UF module is suitable for water with low turbidities, compared with outside-in PVDF UF, DFPES9056 requires more strict pretreatment.
Features
● 0.02μm finner pore size with log 4 retention
● Direct replacement for HYDRAcap-60
● High recovery after chemical cleaning
● Inside-out flow operation
Application
● Drinking water treatment
● Ultra pure water treatment
● Wastewater reuse process
● Oil&Gas water treatment
Specification
| Model | DFPES9056 | |||
| Specification | Membrane material | Capillary PES | ||
| Housing material | UPVC | |||
| Pore size(μm) | 0.02 | |||
| Membrane area(m2) | 56 | |||
| L length(mm) | 1708 | |||
| D diameter(mm) | 250 | |||
| Connection size | 2‘’ Victaulic | |||
| Potting material | Epoxy resin | |||
| Operating mode | Inside-out | |||
| Operation parameter | Instantaneous chlorine concentration(ppm) | 500 | ||
| Operation chlorine concentration(ppm) | 200 | |||
| Max feed turbidity | 100 NTU(Instantaneous) | |||
| Operating pH range | 4.0 - 10 | |||
| Cleaning pH range | 1.0 - 13 | |||
| Max backwash pressure(Mpa) | 0.2 | |||
| Max feed pressure(Mpa) | 0.5 | |||
| Air scour | Not required | |||
| Backwash duration | 30 - 60 s | |||
| Backwash frequency | every 20 - 60min | |||
| Maintenance cleaning frequency | 1 - 4 times/day | |||
| Maintenance cleaning duration | 1 - 30 min | |||
| Cleaning chemicals | NaOH, HCl, Citric acid | |||
| Design flux(LMH) | 30 - 120 | |||
| Filtrate quality | Turbidity | ≤0.1 NTU | ||
| Bacterial rejection | >4 log | |||
Related Products
Send Inquiry