Pentair 78C1KPK995 COMPACT 33V Alternative
DTUFPCOM33 module is produced in PVDF material with 30nm pore size, membrane inner tube diameter is 5.2mm, it can be used as economical replacement for Pentair 78C1KPK995 COMPACT 33V membrane. DelTube series ultrafiltration membrane is made by tubular design, tubular membranes are particularly suited to liquid with high viscosity or suspended solids, because their wide flow paths make them highly resistance to clogging. Cross-flow filtration can reduce cleaning times and downtime so as to maintain a high flow rate.
DTUFPCOM33 can be used in Airlift MBR system with very low transmembrane pressure and energy consumption, it can fit into original Pentair MBR membrane system.
Features
● Sanitary modules with compact design
● Direct replacement for Pentair compact 33V membrane
● Excellent chemical resistance
● Cross flow mode
Application
● Dairy products processing
● Fruit juice clarification
● Fermentation clarification
| Model | DTUFPCOM33 | |
| Specification | Membrane material | PVDF |
| Housing material | PVC | |
| Pore size | 30 nm | |
| Tube diameter(mm) | 5.2 | |
| Module diameter(inch) | 8 | |
| Length (mm) | 3,000 | |
| Diameter (mm) | 220 | |
| Membrane area | 33 ㎡ | |
| Operation parameter | Maximum operating pressure | 8 bar |
| Minimum outlet puressure | 0.7 bar | |
| Max permeate pressure | 0.2 bar | |
| Max working temperature | 60 ℃ | |
| pH range continuous | 2 - 10 | |
| pH range short term | 2 - 12 | |
| Max.chlorine concentration(ppm) | 250,000 ppm/h | |
Kind Notice: Delta Filtration does not provide original Pentair membrane, if Pentair alternative is acceptable, welcome to contact Delta sales team.
Category:
Pentair Equivalent
Keywords:
Roll Membrane | High Flow Filter | PP Pleated Filter
Contact Us
Tel: +86-513-89157856
Email: sales@delta-filtration.com
Product Description
DTUFPCOM33 module is produced in PVDF material with 30nm pore size, membrane inner tube diameter is 5.2mm, it can be used as economical replacement for Pentair 78C1KPK995 COMPACT 33V membrane. DelTube series ultrafiltration membrane is made by tubular design, tubular membranes are particularly suited to liquid with high viscosity or suspended solids, because their wide flow paths make them highly resistance to clogging. Cross-flow filtration can reduce cleaning times and downtime so as to maintain a high flow rate.
DTUFPCOM33 can be used in Airlift MBR system with very low transmembrane pressure and energy consumption, it can fit into original Pentair MBR membrane system.
Features
● Sanitary modules with compact design
● Direct replacement for Pentair compact 33V membrane
● Excellent chemical resistance
● Cross flow mode
Application
● Dairy products processing
● Fruit juice clarification
● Fermentation clarification
| Model | DTUFPCOM33 | |
| Specification | Membrane material | PVDF |
| Housing material | PVC | |
| Pore size | 30 nm | |
| Tube diameter(mm) | 5.2 | |
| Module diameter(inch) | 8 | |
| Length (mm) | 3,000 | |
| Diameter (mm) | 220 | |
| Membrane area | 33 ㎡ | |
| Operation parameter | Maximum operating pressure | 8 bar |
| Minimum outlet puressure | 0.7 bar | |
| Max permeate pressure | 0.2 bar | |
| Max working temperature | 60 ℃ | |
| pH range continuous | 2 - 10 | |
| pH range short term | 2 - 12 | |
| Max.chlorine concentration(ppm) | 250,000 ppm/h | |
Kind Notice: Delta Filtration does not provide original Pentair membrane, if Pentair alternative is acceptable, welcome to contact Delta sales team.
Related Products
Send Inquiry