Retrofit For Dow Filmtec ECO PRO-440
Delta Filtration RO membrane DFBW8040-41i can work as direct replacement for Dow Filmtec Eco Pro-440 element for brackish water treatment process with TDS range 1,000~10,000 mg/L, available filtration areas are 37㎡, 39㎡ and 41㎡ for DFBW8040 model, it provides high salt-rejection rate with low operation pressure.
DFBW8040-41i BWRO membrane can be used in wide range of treatment process including sea water desalination(second pass RO), drinking water filtration, wastewater recycling and grey water reuse etc.
| Model | DFBW4040 | DFBW8040 | DFBW8040-39i | DFBW8040-41i | |
| Specification | Membrane material | Polyamide Composite | |||
| Membrane area(m2) | 7.9 | 37 | 39 | 41 | |
| Salt rejection rate | 99.60% | 99.60% | 99.60% | 99.60% | |
| Permeate rate(GPD) | 2,300 | 10,500 | 11,500 | 13,000 | |
| Length(mm) | 1,016 | ||||
| Diameter(mm) | 100 | 201 | 201 | 201 | |
| Operation parameter |
Max. Working pressure | 600 psi(4.1Mpa) | |||
| Max.Feed temperature | 45℃ | ||||
| Max feed flow(m3/h) | 3.7 | 17 | 17 | 17 | |
| pH range | 1~13 | ||||
| Max pressure drop | 15 psi(0.1Mpa) | ||||
| Residual chlorine(mg/L) | <0.1 | ||||
| Feed SDI value(mg/L) | <5 | ||||
| Test condition | Concentration of solution(NaCl) | 2,000 mg/L | |||
| Temperature(℃) | 25 | ||||
| pH value | 7~8 | ||||
| Operation pressure psi | 225 | ||||
| Recovery rate | 0.15 | ||||
DFBW8040 brackish water RO membranes are supplied with good prices, it can be economical replacement for below brands, OEM label service is available:
Dow FilmTec BW30-400
Dow FilmTec BW30HR-440i
Hydranautics ESPA2-8040
Hydranautics CPA5-LD
Toray TM720D-400
Koch TFC 8040-HR-400
CSM RE 8040 - BLN440
CSM RE 8040-BLF
CSM RE 8040-BLN etc.
Category:
RO Membrane
Keywords:
Roll Membrane | High Flow Filter | PP Pleated Filter
Contact Us
Tel: +86-513-89157856
Email: sales@delta-filtration.com
Product Description
Delta Filtration RO membrane DFBW8040-41i can work as direct replacement for Dow Filmtec Eco Pro-440 element for brackish water treatment process with TDS range 1,000~10,000 mg/L, available filtration areas are 37㎡, 39㎡ and 41㎡ for DFBW8040 model, it provides high salt-rejection rate with low operation pressure.
DFBW8040-41i BWRO membrane can be used in wide range of treatment process including sea water desalination(second pass RO), drinking water filtration, wastewater recycling and grey water reuse etc.
| Model | DFBW4040 | DFBW8040 | DFBW8040-39i | DFBW8040-41i | |
| Specification | Membrane material | Polyamide Composite | |||
| Membrane area(m2) | 7.9 | 37 | 39 | 41 | |
| Salt rejection rate | 99.60% | 99.60% | 99.60% | 99.60% | |
| Permeate rate(GPD) | 2,300 | 10,500 | 11,500 | 13,000 | |
| Length(mm) | 1,016 | ||||
| Diameter(mm) | 100 | 201 | 201 | 201 | |
| Operation parameter |
Max. Working pressure | 600 psi(4.1Mpa) | |||
| Max.Feed temperature | 45℃ | ||||
| Max feed flow(m3/h) | 3.7 | 17 | 17 | 17 | |
| pH range | 1~13 | ||||
| Max pressure drop | 15 psi(0.1Mpa) | ||||
| Residual chlorine(mg/L) | <0.1 | ||||
| Feed SDI value(mg/L) | <5 | ||||
| Test condition | Concentration of solution(NaCl) | 2,000 mg/L | |||
| Temperature(℃) | 25 | ||||
| pH value | 7~8 | ||||
| Operation pressure psi | 225 | ||||
| Recovery rate | 0.15 | ||||
DFBW8040 brackish water RO membranes are supplied with good prices, it can be economical replacement for below brands, OEM label service is available:
Dow FilmTec BW30-400
Dow FilmTec BW30HR-440i
Hydranautics ESPA2-8040
Hydranautics CPA5-LD
Toray TM720D-400
Koch TFC 8040-HR-400
CSM RE 8040 - BLN440
CSM RE 8040-BLF
CSM RE 8040-BLN etc.
Related Products
Send Inquiry