Retrofit For Memstar UF-1010E
Fluoro-Pure DeFlow Series DFPVDF1050MS module is made with hollow fiber PVDF (Polyvinylidene fluoride), it can be used as economical replacement for Memstar UF-1010E ultrafiltration module with 55㎡ filtration area. DFPVDF1050MS module can operated in dead end or cross-flow mode, 0.03μm pore size can effectively retain suspended solids, particles and bacteria etc.
Fluoro-Pure UF membrane module can also be used to replace Memstar UF-1010ET and UF-1020E model with similar performance, delivery time is usually within 2 weeks, fast delivery from Shanghai port.
Features
● 0.03μm pore size produces high quality filtrate
● Excellent chemical resistance
● Bacteria and virus removal performance
● Typical permeate SDI<3, turbidity <0.1NTU
Application
● Drinkging water treatment
● Ultra pure water production
● Industrial wastewater treatment
● Cross-flow wine filtration
Specification
| Model | DFPVDF1050MS | DFPVDF1080 | |
| Specification | Membrane material | PVDF | PVDF |
| Housing material | UPVC | UPVC | |
| Membrane area(m2) | 55 | 120 | |
| Overall length(mm) | 1,186.00 | 2,230.00 | |
| Module diameter(mm) | 250 | 250 | |
| Connection size | DN50 | DN50 | |
| Potting material | Epoxy resin | Epoxy resin | |
| Bacterial rejection | >4 log | >4 log | |
| Operation parameter | Max chlorine concentration(ppm) | 2,000 | 2,000 |
| pH range | 1.0 - 13 | 1.0 - 13 | |
| Max backwash pressure(Mpa) | 0.2 | 0.2 | |
| Max feed pressure(Mpa) | 0.3 | 0.3 | |
| Max backwash flow(L/H) | 5,500 | 12,000 | |
| Air scour rate(Nm3/h) | 6.0 - 9.0 | 10 - 15 | |
| Design flux(LMH) | 50 - 120 | 50 - 120 | |
Category:
Ultrafiltration Membrane
Memstar Equivalent
Keywords:
Roll Membrane | High Flow Filter | PP Pleated Filter
Contact Us
Tel: +86-513-89157856
Email: sales@delta-filtration.com
Product Description
Fluoro-Pure DeFlow Series DFPVDF1050MS module is made with hollow fiber PVDF (Polyvinylidene fluoride), it can be used as economical replacement for Memstar UF-1010E ultrafiltration module with 55㎡ filtration area. DFPVDF1050MS module can operated in dead end or cross-flow mode, 0.03μm pore size can effectively retain suspended solids, particles and bacteria etc.
Fluoro-Pure UF membrane module can also be used to replace Memstar UF-1010ET and UF-1020E model with similar performance, delivery time is usually within 2 weeks, fast delivery from Shanghai port.
Features
● 0.03μm pore size produces high quality filtrate
● Excellent chemical resistance
● Bacteria and virus removal performance
● Typical permeate SDI<3, turbidity <0.1NTU
Application
● Drinkging water treatment
● Ultra pure water production
● Industrial wastewater treatment
● Cross-flow wine filtration
Specification
| Model | DFPVDF1050MS | DFPVDF1080 | |
| Specification | Membrane material | PVDF | PVDF |
| Housing material | UPVC | UPVC | |
| Membrane area(m2) | 55 | 120 | |
| Overall length(mm) | 1,186.00 | 2,230.00 | |
| Module diameter(mm) | 250 | 250 | |
| Connection size | DN50 | DN50 | |
| Potting material | Epoxy resin | Epoxy resin | |
| Bacterial rejection | >4 log | >4 log | |
| Operation parameter | Max chlorine concentration(ppm) | 2,000 | 2,000 |
| pH range | 1.0 - 13 | 1.0 - 13 | |
| Max backwash pressure(Mpa) | 0.2 | 0.2 | |
| Max feed pressure(Mpa) | 0.3 | 0.3 | |
| Max backwash flow(L/H) | 5,500 | 12,000 | |
| Air scour rate(Nm3/h) | 6.0 - 9.0 | 10 - 15 | |
| Design flux(LMH) | 50 - 120 | 50 - 120 | |
Related Products
Send Inquiry