Retrofit For Berghof MO 104G_I8 XL V
DTUF100160-I8V module is produced in PVDF material with 10inch diameter, membrane inner tube diameter is 8mm, total length is 4000mm, it can be used as economical replacement for Berghof HyperFlux module of 104G_I8 XL V turbular membrane with compatible dimensions and less flux decline.
Tubular membranes are recognized for their excellent strength, good resistance to pollution, and ease of operation and maintenance. The designed flux is as high as 70~100L/ (m2.h), the filtration accuracy can reach 30nm, and the 8mm large channel can effectively intercept the sludge without causing clogging of the membrane tube and fouling. The efficient interception of the membrane allows the sludge concentration in the biochemical pool to reach more than 40g/L.
Features
● Sanitary modules with compact design
● Direct replacement for Berghof membrane
● Excellent chemical resistance
● Cross flow mode
Application
● Enzyme separation
● Wastewater treatment
● Fermentation clarification
● Landfill leachate treatment
| Model | DTUF100160-I8V | |
| Specification | Membrane material | PVDF |
| Housing material | FRP | |
| Pore size | 30 nm | |
| Tube diameter(mm) | 8 | |
| Module diameter(mm) | 207 | |
| Length (mm) | 4,000 | |
| Membrane area | 53.4㎡ | |
| Filtrate connection | 88.9mm | |
| Operation parameter | Maximum operating pressure | 8 bar |
| Minimum outlet puressure | 0.7 bar | |
| Max permeate pressure | 0.2 bar | |
| Max working temperature | 60 ℃ | |
| pH range continuous | 2 - 10 | |
| pH range short term | 2 - 12 | |
| Max.chlorine concentration(ppm) | 250,000 ppm/h | |
Category:
Berghof Equivalent
Keywords:
Roll Membrane | High Flow Filter | PP Pleated Filter
Contact Us
Tel: +86-513-89157856
Email: sales@delta-filtration.com
Product Description
DTUF100160-I8V module is produced in PVDF material with 10inch diameter, membrane inner tube diameter is 8mm, total length is 4000mm, it can be used as economical replacement for Berghof HyperFlux module of 104G_I8 XL V turbular membrane with compatible dimensions and less flux decline.
Tubular membranes are recognized for their excellent strength, good resistance to pollution, and ease of operation and maintenance. The designed flux is as high as 70~100L/ (m2.h), the filtration accuracy can reach 30nm, and the 8mm large channel can effectively intercept the sludge without causing clogging of the membrane tube and fouling. The efficient interception of the membrane allows the sludge concentration in the biochemical pool to reach more than 40g/L.
Features
● Sanitary modules with compact design
● Direct replacement for Berghof membrane
● Excellent chemical resistance
● Cross flow mode
Application
● Enzyme separation
● Wastewater treatment
● Fermentation clarification
● Landfill leachate treatment
| Model | DTUF100160-I8V | |
| Specification | Membrane material | PVDF |
| Housing material | FRP | |
| Pore size | 30 nm | |
| Tube diameter(mm) | 8 | |
| Module diameter(mm) | 207 | |
| Length (mm) | 4,000 | |
| Membrane area | 53.4㎡ | |
| Filtrate connection | 88.9mm | |
| Operation parameter | Maximum operating pressure | 8 bar |
| Minimum outlet puressure | 0.7 bar | |
| Max permeate pressure | 0.2 bar | |
| Max working temperature | 60 ℃ | |
| pH range continuous | 2 - 10 | |
| pH range short term | 2 - 12 | |
| Max.chlorine concentration(ppm) | 250,000 ppm/h | |
Related Products
Send Inquiry