Bahrain Poly Classic C Melt Blown Cartridge Filter

Category:

BahrainDepth Filter

Phone:400-888-8888

Inquire

Product Description

Poly Classic C melt blown cartridge filter is pure polypropylene with obvious gradient structure depth filter, which welded by Superfine fibers inside and cruder fibers at the surface. Groove surface treatment brings larger surface area and longer service life. Poly Classic C filter is designed with the structure of thin outside and dense inside, and the surface has grooved, which greatly improves the effective filtering area of the filter and has strong pollution absorption capacity, and its dirt holding capacity is more than 2-3 times that of common melt-blown filter .The groove design also reduces the initial pressure drop, the flux is large, especially suitable for liquid filtration with high content of suspended material.

Features

　　● Graded pore structure enhances dirt holding capacity

　　● All PP construction provides good resistance to both organic and inorganic solvent

　　● Grooved surface enhances removal efficiency

　　● Free of binders,additives and lubricants

　　● Long service life

　　● Manufactured by FDA grade polypropylene

Application

　　● Pre-RO

　　● Electronic

　　● Chemical solvents

　　● Food and Beverage Processing

　　● Cooling water

Specification

Materials of Construction
Filter Media	Polypropylene
End Cap Material	NA or Polypropylene
Core	NA or Polypropylene
End Cap	222 Flat/222 Fin/226 Flat/226 Fin/DOE
O-Rings	Silicone/EPDM/Viton/NBR
Dimensions(Nominal)
Nominal Outside Diameter :	2.5inch/63±1(mm)
Nominal Inside Diameter	1.1inch/28mm)
Length	10inch,20inch,30inch,40inch, 50inch,60inch,70inch
Micron Ratings	1μm,3μm,5μm,10μm,20μm, 30μm,50μm,75μm,100μm
Operating Condition
Maximum Temperature:	180℉ (82 ℃)
Maximum Pressure:	56psi (4bar) @ 68 ℉ (20 ℃)
Recommended change-out pressure:	35psi (2.4bar) @ 68 ℉ (20 ℃)