Belarus Retrofit For 3M Liqui-Flux

Fluoro-Pure DFPESW10-75 Ultrafiltration module is made with hollow fiber Polyethersulfone(PES) membrane which is naturally hydrophilic and suitable for liquid filtration, it can be used to replace 3M MEMBRANA Liqui-Flux W10 Series UF membrane modules with better cost effectiveness.

Category:

Belarus3M Equivalent

Phone:400-888-8888

Inquire

Product Description

Fluoro-Pure DFPESW10-75 Ultrafiltration module is made with hollow fiber Polyethersulfone(PES) membrane which is naturally hydrophilic and suitable for liquid filtration, it can be used to replace 3M MEMBRANA Liqui-Flux W10 Series UF membrane modules with better cost effectiveness.

Hollow fiber UF module allows for larger loading capacity with same space, 0.02μm pore size contributes to good rejection to bacteria and virus, PES material has very good hydrophilic feature and less membrane fouling.

Features

● 0.02μm pore size produces high quality filtrate

● Direct replacement for 3M Liqui-Flux W10 Ultrafiltration

● Good flux recovery after cleaning

● Excellent chemical resistance by PES membrane

● Inside-Out flow mode

Application

●Pre-RO

●Power plant water treatment

●Drinking water filtration

●Oil&Gas water treatment

●Pharmaceutical water treatment

Specification

Model		DFPESW10-75
Specification	Membrane material	PES
	Housing material	UPVC
	Pore size(μm)	0.02
	Membrane area(m2)	75
	Potting material	Polyurethane resin
Operation parameter	Max.chlorine concentration(ppm)	200
	pH range during operation	2 - 11
	pH range during cleaning	1 - 13
	Max backwash pressure(Mpa)	0.25
	Max feed pressure(Mpa)	0.6
	Max backwash flow(L/H)	250LMH
	Max working temperature	40℃
	Design flux(LMH)	50 - 150