Belarus Submerged Ultrafiltration

Fluoro-Klean DELPHEN membrane units are specially developed as anti-fouling submerged ultrafiltration by adding GraphenXTM to improve the hydrophility performance of submerged UF membrane modules, generally the surface of graphene contains a large number of functional groups such as carboxyl, hydroxyl, and carbonyl, which can be added to the PVDF casting liquid to improve the hydrophilicity of the casting liquid and make a large number of pores on the surface of the film.

Category:

BelarusUltrafiltration Membrane

Phone:400-888-8888

Inquire

Product Description

Fluoro-Klean DELPHEN membrane units are specially developed as anti-fouling submerged ultrafiltration by adding GraphenXTM to improve the hydrophility performance of submerged UF membrane modules, generally the surface of graphene contains a large number of functional groups such as carboxyl, hydroxyl, and carbonyl, which can be added to the PVDF casting liquid to improve the hydrophilicity of the casting liquid and make a large number of pores on the surface of the film. The porosity of the PVDF/graphene increased and evenly distributed on the surface of the membrane, which improved the permeability of the PVDF membrane. The anti-pollution performance of the PVDF/graphene membrane is better than that of the original PVDF membrane, thus providing higher flux, longer service life and less fouling risk.

The submerged membrane is operated by negative suction, available filtration areas are 10㎡, 15㎡ and 20㎡.

Features

● Anti-fouling performance with good hydrophilicity

● Reinforced PVDF to avoid fiber breakage

● Excellent retention to bacteria and virus

● Quick installation and fast replacement

Application

● Municipal wastewater treatment

● Grey water reuse

● Industrial effluent treatment

● Pharmaceutical wastewater treatment

● Existing wastewater plant capacity expansion

Specification

Model		DFHFMBRG4010	DFHFMBRG6015	DFHFMBRG8020
Specification	Membrane material	PVDF	PVDF	PVDF
	Housing material	ABS	ABS	ABS
	Pore size(μm)	0.05	0.05	0.05
	Membrane area(m2)	10	15	20
	Overall length(mm)	1,000	1,500	2,000
	Permeate size(mm)	φ 26.8
Operation parameter	Max chlorine concentration(ppm)	5,000	5,000	5,000
	pH range	1~10	1~10	1~10
	Max feed pressure(Mpa)	-0.05	-0.05	-0.05
	Max backwash flow(LMH)	25 - 30	25 - 30	25 - 30
	Filtration mode	Negative suction	Negative suction	Negative suction
	Design flux(LMH)	20~35	20~35	20~35