PRODUCTS CENTER


Belarus Toray HFU-1020AN Membrane Equivalent

Fluoro-Pure DELFIL Ultrafiltration is developed to replace TORAY UF Membrane TORAYFIL series as a more economical replacement solution, 100% compatible with existing UF system, PVDF membrane and PVC housing structure provides good resistance to chlorine and strong acids, which allows for better chemical cleaning to recover membrane flux.

Product Description

Fluoro-Pure DELFIL Ultrafiltration DFUFPVDF8529 is economical replacement for Toray HFU-1020AN membrane series, 100% compatible with existing UF system, PVDF membrane and PVC housing structure provides good resistance to chlorine and strong acids, which allows for better chemical cleaning to recover membrane flux. Outside-inside flow direction allows for high tolerance for feed water quality and supports air scour to enhance cleaning efficiency to recover the flux.

Fluoro-Pure DELFIL UF 0.01μm pore size can effectively remove contaminants such as particles, bacteria and virus as well as providing high flow rate performance, when used as pretreatment of reverse osmosis(RO), RO systems can be designed at higher flux, with fewer membranes and vessels leading to lower capital cost for the RO system.

Features

   Direct replacement for Toray HFU-1020AN

  ● Same operation mode as Toray ultrafiltration

  ● Easy flux recovery after cleaning

  ● Excellent chemical resistance

         ● Asymmetric structure to enhance service life

Application

   Pretreatment for RO desalination

  ● Industrial process water

  ● Drinking water filtration

  ● Oil&Gas water treatment

  ● Tertiary wastewater treatment

       ● Textile wastewater recycling

 

Model

DFUFPVDF8529

 

 

 

 

 

Specification

 

 

 

 

 

 

 

 

 

 

 

Membrane material

PVDF

Housing material

UPVC

Pore size(μm)

0.01

Inner diameter(mm)

0.7

Outer diameter(mm)

1.3

Membrane area(m2)

72

Overall length(mm)

1,120

Module diameter(mm)

216

Feed water/Air inlet

DN80

Filtrate outlet

DN80

Concentrate/Air outlet

DN65

Potting material

Epoxy resin

 

 

 

Operation

parameter

 

 

 

 

 

 

Max.chlorine concentration(ppm)

2000

pH range

1 - 10

Max backwash pressure(Mpa)

0.3

Max feed pressure(Mpa)

0.3

Max backwash flow(L/H)

5,400

Air scour rate(Nm3/h)

7.0 - 9.0

Design flux(LMH)

50 - 120

 

 

 

FAQ:

Q: Can UF membrane be used for drinking water treatment? What is its advantage compared with RO technology?

A: Yes UF is very good technology to produce clean and safe drinking water, it can effectively remove suspended solid, bacteria and virus while remain helpful minerals to human body but can be rejected by RO technology, it is more energy saving with much lower operation pressure, high design flux makes less consumption of membrane modules and less footprint.

 

Q: When UF membranes work as pretreatment of RO system, what is its advantage compared with cartridge filters?

A: Ultrafiltration membrane pore size ranges from 0.01μm to 0.1μm, it is much finer than cartridge filters which makes it be able to remove small bacteria and virus and produce much cleaner fluid for RO system and prolong membrane system service life.

UF+RO technology can also be used for wastewater and grey water reuse purpose.