Bolivia Poly Classic D Melt Blown Cartridge Filter

Category:

BoliviaDepth Filter

Phone:400-888-8888

Inquire

Product Description

Poly Classic D melt blown cartridge filter is pure polypropylene of special structure with great dirty holding capacity depth filter, which is an exceptional value for general applications where long life, high flow rate purity and low change-out frequency are required. It true-graded density filter material (lower density at the surface, with progressively higher density toward the center of the filter) captures particles throughout the entire filter depth. This excellent performance ensure the filter longer life and fewer change-outs than existing general melt-blown filters.

Features

　　● Graded pore structure enhances dirt holding capacity

　　● High contaminant removal efficiency

　　● Wide application

　　● Great flow rate and low pressure drop

　　● Long service life

Application

　　● Pre-RO

　　● Electronic

　　● Oil injection water

　　● Chemical solvents

　　● Drinking water treatment

　　● Cooling water

Specification

Materials of Construction
Filter Media	Polypropylene
End Cap Material	NA or Polypropylene
Core	Polypropylene
End Cap	222 Flat/222 Fin/226 Flat/226 Fin/DOE
O-Rings	Silicone/EPDM/Viton/NBR
Dimensions(Nominal)
Nominal Outside Diameter :	2.5inch/63±1(mm)
Nominal Inside Diameter	1.1inch/28mm)
Length	10inch,20inch,30inch,40inch, 50inch,60inch,70inch
Micron Ratings	1μm,3μm,5μm,10μm,20μm, 30μm,50μm,75μm,100μm
Operating Condition
Maximum Temperature:	180℉ (82 ℃)
Maximum Pressure:	50psi (3.5bar) @ 68 ℉ (20 ℃)
Recommended change-out pressure:	35psi (2.4bar) @ 68 ℉ (20 ℃)