PRODUCTS CENTER
Bolivia High Flow Filter Cartridge - Pall Ultipleat Retrofit
Category:
Product Description
Pleat Plus P high flow filter cartridge is equivalent to Pall Ultipleat high flow water filter with 6 inch large diameter which provides large filtration area and high flow rate up to 110m³/hr per element, absolute rating from 1micron to 100micron can offer excellent protection for downstream membrane system, available length are 20inch, 40inch, 60inch and 80inch.
PleatPlus P series cartridge can greatly save footprint and reduce filter change-out cost, it has been used in wide range of filtration process including Oil&Gas, Power Plant, Desalination, Food&Beverage Industries etc., Delta Filtration provides OEM private label and fast shipping service.
Features
► Compatible dimensions allows for direct fit into original filter housing.
► Sophisticated pleating technology can maximize filtration area and service life.
► Reinforced outer cage and inner core option provides robust structure.
► Proven performance by successful references from different industries.
Economical replacement for below vendors:
|
Brand |
Series |
|
Pall |
Ultipleat high flow |
|
3M Cuno |
High Flow HFR Series |
|
Parker |
Fulflo® ParMax™ SELECT |
|
Eaton |
LOFPLEAT™ HF Series |
|
Amazon Filters |
SupaPleat HFC |
|
Graver Technologies |
HIGH FLOW FILTER SERIES |
|
Materials of Construction |
|
|
Filter Media |
Polypropylene/Glass Fiber |
|
End Caps |
Polypropylene |
|
Inside Core |
NA or Polypropylene |
|
Outside Core |
Polypropylene or Binding |
|
O-Rings |
Silicone/EPDM/NBR |
|
Dimensions(Nominal) |
|
|
Nominal Outside Diameter : |
6inch/152mm |
|
Nominal Inside Diameter |
3inch/76mm |
|
Length |
20 / 40 / 60 / 80 inches |
|
Micron Ratings |
1μm,3μm,5μm,10μm,20μm, 30μm,50μm,75μm,100μm |
|
Operating Condition |
|
|
Maximum Temperature: |
180℉ (82 ℃) |
|
Maximum Pressure: |
58psi (4bar) @ 68 ℉ (20 ℃) |
|
Recommended change-out pressure: |
35psi (2.4bar) @ 68 ℉ (20 ℃) |
Order Information
|
For Example: DFHFP 5 - 40 S C |
|||||||
|
DFHF |
Series |
Rating |
- |
Length |
Material |
O-Ring |
Cage |
|
Delta Filtration High Flow |
P=Pleat Plus P |
1=1μm 3=3μm 5=5μm 10=10μm 20=20μm 30=30μm 50=50μm 75=75μm 100=100μm |
NA |
20=20inch 40=40inch 60=60inch 80=80inch
|
Blank=Polypropylene G=Glass Fiber
|
S=Silicone E=EPDM N=NBR V=Viton |
C=Cage B=Belt |
FAQ List
Q: How is your PleatPlus P cartridge filter performance compared with Pall Ultipleat?
A: Delta Filtration PleatPlus P cartridge provides superior performance in terms of filtrate SDI and dirt holding capacity, dimensions are compatible which allows for direct replacement.
Q: How long is your delivery time?
A: Thanks to large production capacity, usually we can deliver within 2 weeks.
Q: Can you export to my country?
A: Yes, Delta Filtration has export license and we can export to abroad by working with our long term shipping partners.
Q: How often your filter needs to be replaced?
A: PleatPlus P cartridge usually can work around 3~6 months(depends on project design and water quality), suggested change-out pressure is 2.4bar
Q: How many pieces 60inch cartridges can be shipped in one container?
A: 520 pcs 60inch cartridge can be accommodated in 20 foot container, if with 40foot container, quantity will be about 1200 pcs.
Q: Can we visit your factory?
A: Delta Filtration welcomes customers visit, we will be glad to prepare invitation letter to help you apply for Chinese Visa.
Delta Filtration Material Co.Ltd.
Sales office: 2811, Block B, Zhongnan CBD, Nantong, Jiangsu, China
Tel: 86-(0)51389157856
WhatsApp: +86-13477006021
Email: sales@delta-filtration.com
www.dt-filtri.com
www.delta-filtration.com
Customer message