Bolivia Ultrafiltration DFPVDFMAX60

Delta Filtration Ultrafiltration module DFPVDFMAX60 is equivalent to Hydranautics HYDRAcap MAX 60 UF membrane, with PVDF membrane of pore size 0.03μm, DFPVDFMAX60 can provide superior retention performance and offer log 4 rejection of Giardia cysts and Cryptosporidium oocysts.

Category:

BoliviaHydranautics Equivalent

Phone:400-888-8888

Inquire

Product Description

Fluoro-Pure DELCAP Series Ultrafiltration module DFPVDFMAX60 is equivalent to Hydranautics HYDRAcap MAX 60 UF membrane, with PVDF membrane of pore size 0.03μm, DFPVDFMAX60 can provide superior retention performance and offer log 4 rejection of Giardia cysts and Cryptosporidium oocysts, making it a safe solution for drinking water treatment process.

DFPVDFMAX60 UF module is made with improved NIPS technology, compared with conventional NIPS UF, Delta Filtration PVDF fibers has much better tensile strength, thus it can replace Hydranautics TIPS membranes, delivery usually around 2 weeks with wooden box package.

Features

● 0.03μm finner pore size with log 4 retention

● Direct replacement for HYDRAcap MAX60

● High recovery after chemical cleaning

● Outside-in flow operation

Application

● Drinking water treatment

● Ultra pure water treatment

● Wastewater reuse process

● Oil&Gas water treatment

Specifucation

Model		DFPVDFMAX60
Specification	Membrane material	Capillary PVDF
	Housing material	UPVC
	Pore size(μm)	0.03
	Membrane area(m2)	78
	L length(mm)	1832.6
	D diameter(mm)	250
	Connection size	2‘’ Victaulic
	Potting material	Epoxy resin
	Operating mode	Outside-inside
Operation parameter	Instantaneous chlorine concentration(ppm)	5,000
	Operation chlorine concentration(ppm)	2,000
	Max feed turbidity	300 NTU
	Operating pH range	2.0 - 11
	Cleaning pH range	1.0 - 13
	Max backwash pressure(Mpa)	0.2
	Max feed pressure(Mpa)	0.5
	Maximum air scour rate(Nm3/h)	12
	Air scour duration	120 - 240 s
	Air scour frequency	once every 20 - 60min
	Maintenance cleaning frequency	1 - 3 times/day
	Maintenance cleaning duration	20 - 30 min
	Cleaning chemicals	NaOH, HCl, Citric acid
	Design flux(LMH)	30 - 120
Filtrate quality	Turbidity	≤0.1 NTU
	Bacterial rejection	>4 log