PRODUCTS CENTER


Bolivia DFPES10K9060-Pentair HFS 60 Retrofit

Fluoro-Pure DELFLEX Series DFPES10K9060 Ultrafiltration module is made with hollow fiber Polyethersulfone(PES) membrane with small pore size of 10,000 Dalton Mollecular Weight Cut-Off which can remove colloidal silica from surface water, it can be used to replace Pentair X-Flow HFS 60 tight ultrafiltration membrane with better cost effectiveness.

Product Description

Fluoro-Pure DELFLEX Series DFPES10K9060 Ultrafiltration module is made with hollow fiber Polyethersulfone(PES) membrane with small pore size of 10,000 Dalton Mollecular Weight Cut-Off which can remove colloidal silica from surface water, it can be used to replace Pentair X-Flow HFS 60 tight ultrafiltration membrane with better cost effectiveness. PES material is naturally hydrophilic and less prone to membrane fouling, thus it can be designed with larger flux compared with PVDF material, and there is no need for air scour.

 

Features

    ● Tight pore size of 10,000 Dalton Molecular Weight Cut-Off

    ● 1:1 replacement for Pentair Ultrafiltration membrane

    ● Inside-out flow, no air scour needed

    ● Excellent chemical resistance

    Up to 60㎡ membrane area to enhance capacity

Application

    ● Surface water treatment

    ● Ultra pure water treatment

    ● Industrial wastewater treatment

    ● Pharmaceutical water treatment

Model DFPES10K9060
Specification Membrane material PES
Housing material UPVC
Pore size(MWCO) 10K Dalton
Inner diameter(mm) 0.8
Outer diameter(mm) 1.5
Membrane area(m2) 60
Installation length(mm) 1901-1905
Module diameter(mm) 220
Connection size (Feed/Permeate/Concentrate) DN65(73mm)
Potting material Epoxy resin
Flow direction Inside-out
Operation parameter Max chlorine concentration(ppm) 500
pH range 2 - 13
Max feed pressure(Mpa) 0.4
Max backwash pressure(Mpa) 0.3
Max trans-membrane pressure (Mpa) 0.3
Backwash flow(LMH) 250 - 300
CEB Interval 24 - 48 h