Bolivia Retrofit For HYDRAcap MAX80

Fluoro-Pure DELCAP Series Ultrafiltration module is made with hollow fiber PVDF which has good resistance to chemicals and high mechanical strength, it can be used to replace Hydranautics UF membrane HYDRAcap MAX 80 with large filtration area105㎡, which is good choice for large water treatment plants due to compact skid and small footprint. Outside-in flow mode allows for less strict pretreatment of ultrafiltration membrane module, Pleat Plus P series high flow filters can effectively protect ultrafiltration modules with high quality filtrate in low turbidity and SDI.

Category:

BoliviaHydranautics Equivalent

Phone:400-888-8888

Inquire

Product Description

Outside-in flow mode allows for less strict pretreatment of ultrafiltration membrane module, Pleat Plus P series high flow filters can effectively protect ultrafiltration modules with high quality filtrate in low turbidity and SDI.

Features

● 0.03 / 0.08μm pore size available

● Direct replacement for Hydranautics Ultrafiltration

● High tensile strength for membrane fibers

● Excellent chemical resistance by PVDF membrane

● Can be operated without backwash process

Application

●Desalination RO plant

●Boiler water and condensate treatment

●Drinking water filtration

●Wastewater reclamation

●Ultra pure water treatment

　Specification

Model		DFPVDFMAX80
Specification	Membrane material	Capillary PVDF
	Housing material	UPVC
	Pore size(μm)	0.03 / 0.08
	Membrane area(m2)	105
	L length(mm)	2340.6
	L1 length(mm)	2232.7
	L2 length(mm)	2110.9
	L3 length(mm)	172.00
	D1 diameter(mm)	250
	D2 diameter(mm)	290
	Connection size	2‘’ Victaulic
	Potting material	Epoxy resin
	Operating mode	Outside-inside
Operation parameter	Instantaneous chlorine concentration(ppm)	5,000
	Operation chlorine concentration(ppm)	2,000
	Max feed turbidity	300 NTU
	Operating pH range	2.0 - 11
	Cleaning pH range	1.0 - 13
	Max backwash pressure(Mpa)	0.2
	Max feed pressure(Mpa)	0.5
	Maximum air scour rate(Nm3/h)	15
	Air scour duration	120 - 240 s
	Air scour frequency	once every 20 - 60min
	Maintenance cleaning frequency	1 - 3 times/day
	Maintenance cleaning duration	20 - 30 min
	Cleaning chemicals	NaOH, HCl, Citric acid
	Design flux(LMH)	30 - 120
Filtrate quality	Turbidity	≤0.1 NTU
	Bacterial rejection	>4 log