Bolivia Retrofit For Microdyn PureULTRA PHF-35-V

Fluoro-Pure DeFlow Series DFPVDF1030 module is made with hollow fiber PVDF membrane material, it can directly replace Microdyn Nadir PureULTRA PHF-35-V ultrafiltration module without the need to change piping and fitting. DFPVDF1030 uses permanent hydrophilic PVDF membrane fibers which can provide high flux and stable flow performance, sophisticated module potting can optimizes inner water flow distribution and air scour performance. Fluoro-Pure UF membrane module can also be used to replace Microdyn Nadir PureULTRA PHF-75-V and PureULTRA PHF-105-V model with similar performance, with production center only 120KM away from Shanghai, fast delivery service is available.

Category:

BoliviaUltrafiltration Membrane

BoliviaMicrodyn Nadir Equivalent

Phone:400-888-8888

Inquire

Product Description

Fluoro-Pure UF membrane module can also be used to replace Microdyn Nadir PureULTRA PHF-75-V and PureULTRA PHF-105-V model with similar performance, with production center only 120KM away from Shanghai, fast delivery service is available.

Features

　 ● 0.03μm pore size produces high quality filtrate

● Compact design, less footprint

● Bacteria and virus removal performance

● Typical permeate SDI<3, turbidity <0.1NTU

Application

● Municipal water treatment

● Food&Beverage pure water production

● Industrial wastewater treatment

● Cross-flow wine filtration

Specification

Model		DFPVDF1030	DFPVDF1060	DFPVDF1080
Specification	Membrane material	PVDF	PVDF	PVDF
	Housing material	UPVC	UPVC	UPVC
	Pore size(μm)	0.03	0.03	0.03
	Inner diameter(mm)	0.7	0.7	0.7
	Outer diameter(mm)	1.3	1.3	1.3
	Membrane area(m2)	35	75	105
	Overall length(mm)	965	1,715	2,215
	Module diameter(mm)	250	250	250
	Connection size	DN50	DN50	DN50
	Potting material	Epoxy resin	Epoxy resin	Epoxy resin
	Bacterial rejection	>4 log	>4 log	>4 log
Operation parameter	Max chlorine concentration(ppm)	3,000	3,000	3,000
	pH range	1.0 - 13	1.0 - 13	1.0 - 13
	Max backwash pressure(Mpa)	0.2	0.2	0.2
	Max feed pressure(Mpa)	0.5	0.5	0.5
	Backwash flow(LMH)	90 - 110	90 - 110	90 - 110
	Backwash duration	30 - 120 seconds
	Backwash frequency	15 - 60 minutes
	Air scour rate(Nm3/h)	5 - 12
	Design flux(LMH)	50 - 120