PRODUCTS CENTER


Bolivia Retrofit For LG G-Brane P7 MR-MHP07A

Fluoro-Pure DELFIL Ultrafiltration model DFUFPVDF8575G is made with hollow fiber PVDF 75㎡ effective filtration area, it can work as economical replacement for LG G-Brane P7 MR-MHP07A and Synopex G-Brane P7 UF Membrane, typical working pressure is 3 bar. DFUFPVDF8575G UF module is produced with 0.1μm membrane fiber with excellent tensile strength, the module can be operated based on both cross-flow and dead-end mode, it can be used for drinking water process and wastewater reuse applications. 

Product Description

Fluoro-Pure DELFIL Ultrafiltration model DFUFPVDF8575G is made with hollow fiber PVDF 75㎡ effective filtration area, it can work as economical replacement for LG G-Brane P7 MR-MHP07A and Synopex G-Brane P7 UF Membrane, typical working pressure is 3 bar.

 

DFUFPVDF8575G UF module is produced with 0.1μm membrane fiber with excellent tensile strength, the module can be operated based on both cross-flow and dead-end mode, it can be used for drinking water process and wastewater reuse applications. 

Features

   Direct replacement for LG G-Brane P7

  ● Same operation principle as LG ultrafiltration

  ● High quality permeate flow

  ● Excellent chemical resistance

Application

   Pretreatment for RO desalination

  ● Food&Beverage water treatment

  ● Drinking water filtration

  ● Oil&Gas water treatment

  ● Ultra Pure Water production

 

Model

DFUFPVDF8575G

 

 

 

 

 

Specification

 

 

 

 

 

 

 

 

 

 

 

Membrane material

PVDF

Housing material

UPVC

Pore size(μm)

0.1

Inner diameter(mm)

0.7

Outer diameter(mm)

1.2

Membrane area(m2)

75

Overall length(mm)

2,152

Module diameter(mm)

216

Feed water/Air inlet

DN80

Filtrate outlet

DN80

Concentrate/Air outlet

DN65

Potting material

Epoxy resin

 

 

 

Operation

parameter

 

 

 

 

 

 

Max.chlorine concentration(ppm)

5000

pH range

1 - 10

Max backwash pressure(Mpa)

0.2

Max feed pressure(Mpa)

0.3

Suggested backwash flow(L/H)

7,500

Air scour rate(Nm3/h)

7.0 - 9.0

Design flux(LMH)

30 - 150