Canada Pall Microza Retrofit

Fluoro-Pure Series Ultrafiltration module is developed to replace Pall Microza microfiltration module UNA-620A UNA-620AB with same dimensions and operation principle, available membrane areas are 50㎡ and 65㎡ -sames as Pall or Asahi Kasei Microza module, it allows for cross-flow and dead-end filtration, 0.03μm pore size contributes to good rejection to contaminants as well as offering high flow rate.

Category:

CanadaAsahi / Pall Microza Equivalent

Phone:400-888-8888

Inquire

Product Description

Fluoro-Pure Series Ultrafiltration module is developed to replace Pall Microza microfiltration module UNA-620A UNA-620AB with same dimensions and operation principle, available membrane areas are 50㎡ and 65㎡ -sames as Pall or Asahi Kasei Microza module, it allows for cross-flow and dead-end filtration, 0.03μm pore size contributes to good rejection to contaminants as well as offering high flow rate.

Ultrafiltration technology can effectively remove suspended solids, bacteria and viruses while keep helpful minerals that are necessary for human body, compared with Nanofiltration and Reverse Osmosis technology, Ultrafiltration can produce clean fluid with much lower power consumption.

Features

　　● Modified PVDF membrane with good hydrophilicity

　　● Direct replacement for Pall UNA-620A UNA-620AB

　　● Anti-fouling with long service life

　　● Excellent chemical resistance

Application

　　● Pre-RO

　　● Power plant water treatment

　　● Drinking water filtration

　　● Oil&Gas water treatment

　　● Pharmaceutical water treatment

● Wastewater treatment

Model		DFUFPVDF620A	DFUFPVDF620AB
Specification	Membrane material	PVDF	PVDF
	Housing material	UPVC	UPVC
	Pore size(μm)	0.03	0.03
	Inner diameter(mm)	0.7	0.7
	Outer diameter(mm)	1.3	1.3
	Membrane area(m2)	50	65
	Overall length(mm)	2,418	2,418
	Module diameter(mm)	165	165
	Connection size	DN50	DN50
	Potting material	Epoxy resin	Epoxy resin
Operation parameter	Max chlorine concentration(ppm)	2000	2000
	pH range	1 - 11	1 - 11
	Max backwash pressure(Mpa)	0.2	0.2
	Max feed pressure(Mpa)	0.3	0.3
	Suggested backwash flow(L/H)	5000	6500
	Air scour rate(Nm3/h)	3 - 6	3 - 6
	Design flux(LMH)	50 - 120	50 - 120