Faroe Islands Glass Fiber High Flow

Category:

Faroe IslandsHigh Flow Filter

Phone:400-888-8888

Inquire

Product Description

Pleat Plus GF high flow filter cartridge coreless and single open-ended(SOE) filter made with glass fiber filter media and glass fiber reinforced cage and end caps which allows for maximum working temperature up to 100℃, 6 inch (152 mm) large diameter offers high flow rate up to 110m3/h, it can greatly save water treatment plant footprint and reduce filter change-out cost. Inside-out flow design traps contaminant inside the element. The high flow glass microfiber filter is good replacement for Pall Ultipleat high flow series filter cartridges, available length are 20inch 40inch 60inch and 80inch.

Features

　　● Graded pore structure enhances dirt holding Capacity

　　● Glass fiber construction provides good resistance to both organic and inorganic solvent

　　● High contaminant removal efficiency

　　● PP core available provides excellent strength of cartridge filter

　　● High temperature tolerance

Application

　　● Pretreatment for RO in desalination industry

　　● Amine filtration in Oil&Gas/refinery industry

　　● Chemical solvents

　　● Drinking water treatment

　　● Cooling water

Specification

Materials of Construction
Filter Media	Glass Fiber
End Caps	Glass Fiber Reinforced Polypropylene
Inside Core	NA
Outside Cage	Glass Fiber Reinforced Polypropylene
O-Rings	Silicone/EPDM/NBR
Dimensions(Nominal)
Nominal Outside Diameter :	6inch/152mm
Nominal Inside Diameter	3inch/76mm
Length	20 / 40 / 60 / 80 inches
Micron Ratings	1μm,3μm,5μm,10μm,20μm, 30μm,50μm,75μm,100μm

Operating Condition
Maximum Temperature:	180℉ (82 ℃)
Maximum Pressure:	58psi (4bar) @ 68 ℉ (20 ℃)
Recommended change-out pressure:	35psi (2.4bar) @ 68 ℉ (20 ℃)