Indonesia Dow SFP-2860 2860XP Alternative

Fluoro-Pure DFP Series Ultrafiltration module is developed to replace Dow Ultrafiltration Membrane SFP 2880 with same dimensions and operation principle, compared with PES, PVC and PAN materials, PVDF has much better resistance to chemicals especially sodium hypochlorite-which is main chemical used for membrane cleaning.

Category:

IndonesiaDuPont Dow Equivalent

Phone:400-888-8888

Inquire

Product Description

Fluoro-Pure DFP Series Ultrafiltration module is developed to replace Dow Ultrafiltration Membrane SFP-2860 with same dimensions and operation principle, compared with PES, PVC and PAN materials, PVDF has much better resistance to chemicals especially sodium hypochlorite-which is main chemical used for membrane cleaning.

It allows for cross-flow and dead-end filtration, 0.03μm pore size contributes to good rejection to contaminants as well as offering high flow rate. Fluoro-Pure DFP Series UF Membrane is a more economical replacement solution for Dow UF membrane SFP-2860, 100% compatible with existing UF system.

Ultrafiltration technology can effectively remove suspended solids, bacteria and viruses while keep helpful minerals that are necessary for human body, compared with Nanofiltration and Reverse Osmosis technology, Ultrafiltration can produce clean fluid with much lower power consumption.

Features

　　● Modified PVDF membrane with good hydrophilicity

　　● Direct replacement for Dow SFP-2860 XP

　　● Anti-fouling with long service life

　　● Excellent chemical resistance

Application

　　● Pre-RO

　　● Power plant water treatment

　　● Drinking water filtration

　　● Oil&Gas water treatment

　　● Pharmaceutical water treatment

● Wastewater treatment

Model		DFPVDF9051	DFPVDF9077
Specification	Membrane material	PVDF	PVDF
	Housing material	UPVC	UPVC
	Pore size(μm)	0.03	0.03
	Inner diameter(mm)	0.7	0.7
	Outer diameter(mm)	1.3	1.3
	Membrane area(m2)	51	77
	Overall length(mm)	1,860	2,360
	Module diameter(mm)	225	225
	Connection size	DN50	DN50
	Potting material	Epoxy resin	Epoxy resin
Operation parameter	Max chlorine concentration(ppm)	2000	2000
	pH range	2 - 11	2 - 11
	Max backwash pressure(Mpa)	0.2	0.2
	Max feed pressure(Mpa)	0.6	0.6
	Suggested backwash flow(L/H)	5000	7500
	Air scour rate(Nm3/h)	5-12	5 - 12
	Design flux(LMH)	50 - 120	50 - 120