Mauritania Pleat Plus Q High Flow Cartridge Filter

Category:

MauritaniaHigh Flow Filter

Phone:400-888-8888

Inquire

Product Description

Pleat Plus Q high flow filter has 6 inch (152 mm) outer diameter providing large surface filtration area, one 40inch filter element can produce max 80 m3 /h, which is optimized for high flow application such as reverse osmosis pre-filtration. Compared with 2.5 inch diameter filter, it can greatly reduce filter use and footprint. Multi-layer construction makes it have high dirt holding capacity and long service life. Available filter media is polypropylene and glass fiber with pore size from 1μm to 100μm. It is equivalent to Parker MegaFlow filters but provides a more cost effective filtration solution.

Features

　　● Outside to inside structure enhances the flow rate

　　● Inner O-Ring design add the removal efficiency

　　● Multi membrane layer enhances the dirt holding capacity

　　● 100% thermally welded reduces the leakage risk

　　● Long service life

Application

　　● Pre-RO

　　● Industrial condensate water

　　● Microeletronics process water

　　● Chemical solvents

　　● Drinking water treatment

　　● Cooling water

　　● Food & Beverage

Specification

Materials of Construction
Filter Media	Polypropylene/Glass Fiber
End Caps	Polypropylene
Inside Core	Polypropylene
Outside Core	Netting
O-Rings	Silicone/EPDM/NBR
Dimensions(Nominal)
Nominal Outside Diameter :	6inch/152mm
Nominal Inside Diameter	3.78inch/96mm
Length	40inch(1016mm)/60inch(1525mm)
Micron Ratings	1μm,3μm,5μm,10μm,20μm, 30μm,50μm,75μm,100μm
Operating Condition
Maximum Temperature:	Polypropylene 180℉ (82 ℃) Glass Fiber 248℉ (121 ℃)
Maximum Pressure:	49psi (3.4bar) @ 68 ℉ (20 ℃)
Recommended change-out pressure:	35psi (2.4bar) @ 68 ℉ (20 ℃)