PRODUCTS CENTER


Mauritania Retrofit For Toray TML20D-400 RO Membrane

Delta Filtration RO membrane DFBW8040 can work as direct replacement for Toray TML20D-400 RO membrane element for brackish water treatment process, it can be used in wide range of treatment process including SWRO desalination(second pass RO), power plant, wastewater reclamation and grey water reuse etc. In addition, reverse osmosis is a more economical operation for concentrating food liquids (such as fruit juices) than conventional heat-treatment processes. Because of its lower mineral content in permeate, Reverse Osmosis water is often used in car washes during the final vehicle rinse to prevent water spotting on the vehicle. 

Product Description

Delta Filtration RO membrane DFBW8040 can work as direct replacement for Toray TML20D-400 RO membrane element for brackish water treatment process, it can be used in wide range of treatment process including SWRO desalination(second pass RO), power plant, wastewater reclamation and grey water reuse etc. In addition, reverse osmosis is a more economical operation for concentrating food liquids (such as fruit juices) than conventional heat-treatment processes. Because of its lower mineral content in permeate, Reverse Osmosis water is often used in car washes during the final vehicle rinse to prevent water spotting on the vehicle. 

Model DFBW4040 DFBW8040 DFBW8040-39i DFBW8040-41i
Specification Membrane material Polyamide Composite
Membrane area(m2) 7.9 37 39 41
Salt rejection rate 99.80% 99.80% 99.80% 99.80%
Permeate rate(GPD) 2,300 10,500 11,500 13,000
Length(mm) 1,016
Diameter(mm) 100 201 201 201
Operation
parameter
Max. Working pressure 600 psi(4.1Mpa)
Max.Feed temperature 45
Max feed flow(m3/h) 3.7 17 17 17
pH range 1~13
Max pressure drop 15 psi(0.1Mpa)
Residual chlorine(mg/L) <0.1
Feed SDI value(mg/L) <5
Test condition Concentration of solution(NaCl) 2,000 mg/L
Temperature(℃) 25
pH value 7~8
Operation pressure psi 225
Recovery rate 0.15